1–49 von 49 Ergebnissen
|

    Environment for Green Vehicles, Efficient is Better

    Peterson, Peter T. | SAE Technical Papers | 2002

    The Learjet “Longhorn” Series - The First Jets with Winglets

    Reynolds, Peter T. | SAE Technical Papers | 1979

    The Influence of Bobweights and Downsprings on Flying Qualities

    Neal, T. Peter | SAE Technical Papers | 1971

    Energy Optimized Aircraft: What is it and how do we make one?

    Lamm, Peter T. / Griggs, Steven C. / Iden, Steven Mark | SAE Technical Papers | 2012

    Determination of Preferred Lumbar Support Handle Type and Location

    Wawrow, Peter T. / Gaizutis, Siobhan | SAE Technical Papers | 2004

    Designing for Large-Displacement Stability in Aircraft Power Systems

    Selby, Barbara / Gries, Mark / Wasynczuk, Oleg et al. | SAE Technical Papers | 2008

    An Automated Average-Value Modeling Methodology for Power Electronic Sources and Loads

    Wu, Ning / Wasynczuk, Oleg / Lamm, Peter T. | SAE Technical Papers | 2006

    The Bombardier Flight Test Center - Meeting the Challenge

    Reynolds, Peter T. / Ranaudo, Richard J. | SAE Technical Papers | 2000

    Developing a Precision and Severity Monitoring System for CEC Performance Tests

    Gray, Christopher T. / Mackney, Derek / Zemroch, Peter J. | SAE Technical Papers | 2004

    Risk Reducing Product and Process Design During New Product Development

    Bender, Don / Abrahamian, John / Conklin, Michael et al. | SAE Technical Papers | 2010

    Formability of Aluminum Tailor-Welded Blanks

    Sherman, Andrew M. / Kridli, Ghassan T. / Friedman, Peter A. | SAE Technical Papers | 2000

    Influence of Weld Characteristics on Numerically Predicted Deformation Behavior of Aluminum Tailor Welded Blanks

    Bhagwan, Amit V. / Kridli, Ghassan T. / Friedman, Peter A. | SAE Technical Papers | 2002

    The KIVA-II Computer Program for Transient Multidimensional Chemically Reactive Flows with Sprays

    Amsden, Anthony A. / O'Rourke, Peter J. / Butler, T. Daniel | SAE Technical Papers | 1987

    Experimental Optimization of the Cold Start for the EcoBoost Engine

    Reiche, David B. / Davis, George C. / Moilanen, Peter C. et al. | SAE Technical Papers | 2009

    Applications of NHTSA's Vehicle Parameter Database

    McCullough, Catherine A. / Battisti, Peter / Hollowell, William T. | SAE Technical Papers | 1995

    Model Validation Planning and Process on the INVENT Program

    Paquette, Andrew / McCormick, David / McCarthy, Kevin et al. | SAE Technical Papers | 2014

    A Direct Torque-Controlled Induction Machine Bidirectional Power Architecture for More Electric Aircraft

    Wells, Jason R. / DeWitt, Laurence B. / Lamm, Peter T. et al. | SAE Technical Papers | 2009

    A Bench Test Study of Port Fuel Injection Fouling

    Bennett, Joshua J. / Miller, Keith T. / Hou, Peter W. et al. | SAE Technical Papers | 2008

    Average-Value Model of a High-Frequency Six-Phase Generation System

    Lucas, Charles E. / Walters, Eric A. / Jatskevich, Juri et al. | SAE Technical Papers | 2004

    Enhancements to Software Tools and Progress in Model-Based Design of EOA on the INVENT Program

    Paquette, Andrew / McCormick, David / McCarthy, Kevin et al. | SAE Technical Papers | 2014

    Theoretical Analysis of a Method of Computing Dynamic Roof Crush During Rollovers

    Ashby, Blake M. / Corrigan, Catherine Ford / Yamaguchi, Gary T. et al. | SAE Technical Papers | 2007

    An Algorithm for the Optimal Allocation of Subsystem Simulations within a Distributed Heterogeneous Simulation

    Lucas, Charles E. / Walters, Eric A. / Wasynczuk, Oleg et al. | SAE Technical Papers | 2004

    Vehicle Electronics (Vetronics) Implications for Vehicle Diagnostics

    Comito, Anthony / Sarna, Donald S. / Walker, Peter T. | SAE Technical Papers | 1983

    Dual Electric Spindle Retrofit for Wing Riveters

    Barry, John P. / Zieve, Peter B. / Meador, Russell T. et al. | SAE Technical Papers | 2006

    Comparison of On-Road and Wind-Tunnel Tests for Tractor-Trailer Aerodynamic Devices, and Fuel Savings Predictions

    Buckley, Frank T. / Saunders, Jeffrey W. / Hoffmann, Peter H. et al. | SAE Technical Papers | 1985

    Advanced Operator Interfaces for a Remote Mobile Manipulation Robot

    Little, Charles Q. / Horschel, Daniel S. / Boissiere, Peter T. | SAE Technical Papers | 1995

    On implementation of Adaptive Hydraulic mounts

    Graf, Peter I. / Stevens, R. W. / Shoureshi, Rahmat et al. | SAE Technical Papers | 1987

    Open-Loop Versus Closed-loop Control for Hydraulic Engine Mounts

    Graf, Peter L. / Stevens, R.W. / Shoureshi, Rahmat et al. | SAE Technical Papers | 1988

    Electric 30,000 RPM Shave Spindle for C Frame Riveter and High Performance Compact Aerospace Drill

    Conley, Bryan / Barry, John P. / Zieve, Peter B. et al. | SAE Technical Papers | 2000

    The Effects of a Heated Catalyst on the Unsteady Gas Dynamic Process

    Carberry, Brendan P. / Long, Peter T. / Fleck, Robert et al. | SAE Technical Papers | 1995

    Direct Sampling Ion Trap Mass Spectrometry - A Growing Toolkit for Air Quality Monitoring Applications

    Nies, Brian / Remigi, Carla / Lee, Liana et al. | SAE Technical Papers | 1998

    Vehicle Reliability and Maintenance CleanFleet Alternative Fuels Project

    Alexander, Graham H. / Herridge, John T. / Gaydos, Peter A. et al. | SAE Technical Papers | 1995

    Comparison of Computed and Measured Air Motion in Circular and Square Piston Cups

    O'Rourke T. Dan Butler, Peter J. / McKinley Roy J. Primus, Thomas L. | SAE Technical Papers | 1988

    Combustion Assisted Belt-Cranking of a V-8 Engine at 12-Volts

    Evans, David G. / Sczomak, David P. / Fattic, Gerald T. et al. | SAE Technical Papers | 2004

    Comparisons of Computed and Measured Three-Dimensional Velocity Fields in a Motored Two-Stroke Engine

    Amsden, Anthony A. / Meintjes, Keith / O'Rourke, Peter J. et al. | SAE Technical Papers | 1992

    The Application of Magnesium Die Casting to Vehicle Closures

    MacDonald, Andrew / Syvret, Andrew / Bretz, Gregory T. et al. | SAE Technical Papers | 2005

    European Programme on Emissions, Fuels and Engine Technologies (EPEFE) - Statistical Design and Analysis Techniques

    Gray, Christopher T. / Sado, Giles / Burghardt, Hans-Martin et al. | SAE Technical Papers | 1996

    Aerodynamic Flow Quality and Acoustic Characteristics of the 40- by 80-Foot Test Section Circuit of the National Full-Scale Aerodynamic Complex

    Edenborough, H. Kipling / Olson, Lawrence E. / Falarski, Michael D. et al. | SAE Technical Papers | 1987

    In-Cylinder Charge Homogeneity During Cold-Start Studied with Fluorescent Tracers Simulating Different Fuel Distillation Temperatures

    Dragonetti, Douglas P. / Swindal, J. Christian / Furman, Peter A. et al. | SAE Technical Papers | 1995

    Improvements in Heater, Defroster and Emissions Performances Using a Latent Heat Storage Device

    Tsantis, Anestis P. / Brown, J. Steven / Lyon, Peter M. et al. | SAE Technical Papers | 1994

    An Investigation of the issues Surrounding the Fuels Adaptability of the Advanced Gas Turbine

    Moore, James S. / McCallum, Peter W. / Rentz, Richard L. et al. | SAE Technical Papers | 1984

    Ambient Temperature and Driving Cycle Effects on CNG Motor Vehicle Emission

    Lanning, Jeffrey / Knapp, Kenneth T. / Perry, Ned et al. | SAE Technical Papers | 1990

    An Expert System/Ion Trap Mass Spectrometry Approach for Life Support Systems Monitoring

    Wong, Carla M. / Johnson, Jodie V. / Story, Michael et al. | SAE Technical Papers | 1992

    Stability Characteristics of a Conical Aerospace Plane Concept

    Hahne, David E. / Gatlin, Gregory M. / Luckring, James M. et al. | SAE Technical Papers | 1989

    Real World Emissions Variability as Measured by Remote Sensors

    Hoffman, Douglas B. / McAlinden, Kenneth J. / Giles, Michael T. et al. | SAE Technical Papers | 1994

    Coordinating Research Council Development of a CRC Intake Valve Deposit Test

    Carlson, Craig A. / Daly, Daniel T. / Schoppe, Dean R. et al. | SAE Technical Papers | 1994