201–250 von 3,025 Ergebnissen
|

    Research on the Application of Electric Heating Floor in Railway Vehicles

    Zhang, Haifeng / Jia, Na / Liang, Jingwen et al. | British Library Conference Proceedings | 2021

    Effects of the Engine Cooling System Design on Fuel Consumption - a Numerical Assessment

    Malaquias, Augusto Cesar Teixeira / Thomaz, Fabricio / de Paula, Glauber Assungao Resende et al. | SAE Technical Papers | 2021
    were chosen for the system with the same cooling capacity, according to the required performance on high loads and extreme environments ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    Thermal Management of Battery Cooling System

    Benny, Bineesh / Rajadurai, Dr.Sivanandi / Bala, Harinivas | SAE Technical Papers | 2021
    system with and without cooling management at pack level. Initially battery system of 66 kWh/400V was designed with 296 Lithium ion pouch cells ...
    Verlag: Society of Automotive Engineers , SAE International

    Development of a Rapid Vehicle Steering Cooling System Using Thermoelectrics

    Gaonkar, Kaustubh / Kumar, Vikas | SAE Technical Papers | 2021
    . Two basic concepts of cooling the steering were used viz. conductive and indirect convective. The indirect convective cooling involved using ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Weather and climate , Simulation and modeling

    Modelling of Engine Cooling System with a New Modelling Approach Based on Dynamic Neural Network

    Blesinger, Georg / Zhang, Hongyang / Toedter, Olaf et al. | SAE Technical Papers | 2021
    system with different initial temperature. Finally, in order to simulate the switching of the cooling and heating processes in the high ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    Reduction of Aero-Acoustics Tonal Noise for a Tractor Cooling Fan

    Avinash, D. / Shankar, M / Maller, Rathish et al. | SAE Technical Papers | 2021
    radiator cooling and avoids engine overheating with uniform heat dissipation. The important parameters that need to be considered while designing a ...
    Verlag: Society of Automotive Engineers , SAE International

    Aggressive Catalyst Heating Strategy Using Advanced Mixture Formation and Combustion Timing Techniques in a GDI Engine

    M, Arulprahaasam / Shanmugam Ramakrishnan, Muthu / R, Navaneetha kannan et al. | SAE Technical Papers | 2021
    summarises the study conducted on a 1.2litre 3-cylinder turbocharged GDI engine to achieve superior catalyst heating using advanced mixture formation ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Starters and starting

    Optimized Cooling System Concept for Electric Compact-SUV with Indian Environmental Conditions

    Emran, M.Sc. Ashraf / Manns, M.Sc. Patrick / Garg, Shivam et al. | SAE Technical Papers | 2021
    With the rising pollutant emission level in Indian cities, the focus on pure BEVs is also increasing in India. Therefore, the Indian ...
    Verlag: Society of Automotive Engineers , SAE International

    Cooling Performance of an Modified R744 Air Conditioning System with Vortex Tube and Internal Heat Exchanger for an Electric Vehicle

    Mendecka, Barbara Malgorzata / Chiappini, Daniele / Bella, Gino | SAE Technical Papers | 2021
    sufficient cooling or heating capacity while minimizing the influence of the AC system on driving ranges and environmental performance.A potential ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Weather and climate

    Research of Influence of Air Intake Openings and Pre-radiator Chamber Design on Airflow Distribution

    Petrov, Alexander | Springer Verlag | 2021
    intake openings and the pre-radiator chamber play a very important role in forming the flow of cooling air through the heat exchangers. In order ...
    Verlag: Springer International Publishing , Cham
    Schlagwörter: Cooling system , Cooling airflow , Aerospace Technology and Astronautics , Transportation Technology and Traffic Engineering

    Determination of Effect of Quenching Parameters on Mechanical Properties of Industrial Steels by Experimental and Simulation Analysis

    Harinarain, Ajay / Saxena, Deepak / Dubey, Mukesh Kumar et al. | SAE Technical Papers | 2021
    of quenching and these are greatly influenced by cooling time, cooling rate, quench media, etc. The cooling rate of quenchant must be ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Cooling , Simulation and modeling , Coatings, colorants, and finishes

    Evaluating Emerging Engine and Powertrain Technologies on Globally Popular Vehicle Platforms

    Nieto Prada, Daniela / Vijayagopal, Ram / Costanzo, Vincent | SAE Technical Papers | 2021
    using advanced vehicle modeling tools and evaluated on the relevant local regulatory cycle or cycles. In all cases, to ensure meaningful results ...
    Verlag: Society of Automotive Engineers , SAE International

    An Optimization Model of Bus Network of Jiangsu University Based on Accessibility

    Meng, Delin / Zhang, Qiyue | IEEE | 2021
    demand but low accessibility were found, and the bus line network was optimized to improve the accessibility of each district to meet the traffic ...

    A Comprehensive Approach of the Lubrication for the Electric Powertrain Based on an Innovative Multi-purpose Fluid

    El Bahi, Hakim | Springer Verlag | 2021
    innovative multi-purpose fluid which meets the new requirements of the combination of electric motor cooling and transmission lubrication. A ...
    Schlagwörter: E-motor cooling

    Impact of Thermal Architecture on Electric Vehicle Energy Consumption/Range: A Study with Full Vehicle Simulation

    Yang, Bozhi / Wei, Dan / Li, Gang et al. | SAE Technical Papers | 2021
    batteries. The cooling/heating performance and energy consumption of both thermal architectures were modeled from -20 °C to 40 °C ambient ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Weather and climate

    Experimental Study of Aluminum Metal Foam Material on Heat Transfer Performance

    Dandekar PhD, Chinmaya / Makhe, Sunil | SAE Technical Papers | 2021
    and functional and are based on several excellent properties of the material. Structural applications take advantage of the light-weight and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development

    EV System Modelling and Co-Simulation with Integrated HVAC and Auxiliary Models

    Negi, Aditya / Zulkefli PhD, Mohd Azrin / Sadaraboina, Moses Vidya Sagar et al. | SAE Technical Papers | 2021
    HVAC, cooling and heating loops of electronics devices, battery and traction control, are also included. Finally, the results over a typical ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Thermal Management System for High Performance Battery Based on an Innovative Dielectric Fluid

    Champagne, Nicolas | Springer Verlag | 2021

    Fast and ultra-fast charging can create tremendous thermal stresses on a battery pack and may cause battery

     ...

    Design, Development and Experimental Investigation on the Effect of HVAC Power Consumption in Electric Vehicle Integrated with Thin Film Solar PV Panels

    Kumar, Anugu / Thanigaivel, Ganesan / S, Karthikeyan et al. | SAE Technical Papers | 2021
    components in an automotive HVAC system (Heating, Ventilation and Air Conditioning) are: Compressor, Cabin blower, Condenser cooling fan and the ...
    Verlag: Society of Automotive Engineers , SAE International

    High Performance HVAC Component Development for EV Using 1-D System Simulation

    Shanmugam, Manivasagam / Radle, Manoj kumar / Jadhav, Swapnil | SAE Technical Papers | 2021
    created in GT-Suite including all the cooling subsystems. The results include various thermal parameters, pull-down performance and the energy ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Analysis of Thermal Coating on Engine Performance Parameters & Fuel Economy of a Small Size NA Spark Ignition Engine

    Rani, Abha / Kaushik, Harshit Kumar / Sarna, Nishant et al. | SAE Technical Papers | 2021
    paper presents application and impact of thermal swing coating on thermal efficiency. Thermal swing coating material follows gas temperature ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Coatings, colorants, and finishes

    Numerical Approach to Welding Process and its Integration in Assessment of Fatigue life of Component

    Apte, Amol / Khandagale, Anup / Tare, Kedar | SAE Technical Papers | 2021
    process. It is prone to generate high residual stresses due to non-volumetric changes during heating and cooling cycle. These residual stresses ...
    Verlag: Society of Automotive Engineers , SAE International

    Effective Battery Design and Integration of Cylindrical Cells for High Power Applications

    Kastler, Helmut / Menzl, Kilian | Springer Verlag | 2021
    immersion cooling, answers all these questions and proposes new solutions on the design and material side. ...
    Schlagwörter: Immersion cooling

    Balancing of HVAC System Energy Consumption in Electric Vehicles

    Mehta, Bhavik / Panchare, Datta / Poal, Vinay | SAE Technical Papers | 2021
    cooling and heating requirements respectively. With such high voltage components, HVAC system tends to cut-down the available driving range from ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Experimental Investigation on the Effect of HVAC Power Consumption in Electric Vehicle Integrated with Thin Film Solar PV Panels

    Kumar, Anugu / Thanigaivel, Ganesan / S, Karthikeyan et al. | SAE Technical Papers | 2021
    components in an automotive HVAC system (Heating, Ventilation and Air Conditioning) are: Compressor, Cabin blower, Condenser cooling fan and the ...
    Verlag: Society of Automotive Engineers , SAE International

    Accelerated Durability Bench Test and Risk Assessment: A Case Study

    Leão, André / Tunes, Gabriela / Bettiol, Giuliano et al. | SAE Technical Papers | 2021
    the modeling, test acceleration, and analysis of its results, based on the theory of materials performance predicted by the Wöhler diagram ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Failure modes and effects analysis , Test equipment and instrumentation

    Sound Power Assessment, Noise Source Identification and Directivity Analysis of Compaction Machines

    Mole, Dhondiram / bari, Jaykumar / Kandalkar, Milind Dadarao et al. | SAE Technical Papers | 2021
    NVH has gained importance in the field of earth moving equipment due to the demand of quieter machines and stringent in-cab as well as ...
    Verlag: Society of Automotive Engineers , SAE International

    A Novel Thermal Management Simulation Model Analysis for The Fuel Cell Electric Truck Systems

    Chandrasekar, C Venkatesh | SAE Technical Papers | 2021
    with the ambient temperature; heat dissipation with different load verified; drivetrain, battery-pack heat dissipation also verified and ...
    Verlag: Society of Automotive Engineers , SAE International

    Improving the Clutch Design Robustness by Virtual Validation to Predict Clutch Energy Dissipation and Temperature in Clutch Housing

    Ganesh, Mohan Selvakumar / Kanagaraj, Pothiraj / M, Sudhan et al. | SAE Technical Papers | 2021
    test,) i.e. launching the vehicle on 15% grade followed by a cooling cycle and repeated over 150 cycles in the developed virtual simulation ...
    Verlag: Society of Automotive Engineers , SAE International

    Improvement of Gasoline Engine Performance and Fuel Economy Through New Hollow Head Valve

    Lia, Luigi / De Giovanni, Pierfrancesco | Springer Verlag | 2021

    In recent years, the international emission standards for vehicles have become increasingly stringent

     ...

    Development of Closed Loop Power Recirculating Type Test Rig - Higher Torque Ranges

    N, Gopi Kannan / Rajaraman, Manikandan / Muthu kumar, Pandurangan et al. | SAE Technical Papers | 2021
    controlling of pre-set temperature of oil during testing with heating and cooling arrangement, mechanical fail safe device, back-to-back gear pair ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Failure modes and effects analysis , Test equipment and instrumentation

    Fuel Cell Vehicle Thermal Management

    SAE Technical Papers | 2021
    The purpose of this SAE Information Report is to provide an overview of special requirements and practices in fuel cell vehicle thermal ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems , Heating, ventilation, and air conditioning systems (HVAC)

    Coupled CFD Simulation of Brake Duty Cycle for Brake System Design

    Chaudhary, Alok Subhash / Ghodake, Preetam / khewale, Swapnil | SAE Technical Papers | 2021
    complex 3D flow physics and heat dissipation from rotors in the vicinity of brake system. Deployment of brake thermal simulations in initial ...
    Verlag: Society of Automotive Engineers , SAE International

    3D CFD Coolant System Simulation for Vehicle Drive-Cycle

    Ballani, Abhishek / Srinivasan, Chiranth / Maiti, Dipak et al. | SAE Technical Papers | 2021
    MP+®. The system includes actual CAD of radiator, cooling jacket, coolant pump, bypass valve and thermostat valve. This work is in ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: CAD, CAM, and CAE , Simulation and modeling

    Potential Analysis of a DMC/MeFo Mixture in a DISI Single and Multi-Cylinder Light Vehicle Gasoline Engine

    Gadomski, Bartosch / Kraus, Christoph / Thamm, Fabian et al. | SAE Technical Papers | 2021
    increased by 16 % at maximum low-end torque compared to gasoline. The increased in-cylinder cooling and the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Approach to Model AC Compressor Cycling in 1D CAE with Enhanced Accuracy of Cabin Cooldown Performance Prediction

    Kadam, Kiran / Varma, Mohit / Jaybhay, Sambhaji et al. | SAE Technical Papers | 2021
    address the challenges in simulation model in order to bridge the gap between physical and digital. In physical phenomenon, during cabin cooldown ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: CAD, CAM, and CAE , Simulation and modeling , Computer software and hardware

    Optimized Power Utilization of Air Conditioner in Electric City Bus Using

    Nesamani, Kevin / Jain, Rajesh / Pandey, Ramakant | SAE Technical Papers | 2021
    algorithm, this enables the controller to identify the areas where cooling has to be focused and where cooling can be reduced or stopped. Once the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Sensors and actuators

    P2i, a Family of Modular, Scalable, and Integrated Hybrid Drive Modules

    Jausel, Heiko / Wenzel, Wolfgang | Springer Verlag | 2021
    EMC behavior. A custom engineered hydraulic module is also integrated into the housing to actuate the disconnect clutch and provide cooling ...

    Chamber Air Flow Control Before the Radiator

    Petrov, Alexander | Springer Verlag | 2021
    fuel consumption and emission of harmful substances, it is necessary to reduce the power consumption for supplying cooling air. At the same ...
    Verlag: Springer International Publishing , Cham
    Schlagwörter: Aerospace Technology and Astronautics , Transportation Technology and Traffic Engineering

    Thermal Management of the Li-Ion Battery Pack with Phase Change Material (PCM)

    Kumar, Tirukoti Mohan / C, Vijay Ram | SAE Technical Papers | 2021
    liquid cooling and hybrid cooling systems. In this paper, a comparison between phase change material (PCM) and PCM/liquid hybrid cooling is made ...
    Verlag: Society of Automotive Engineers , SAE International

    Dualhybrid-Cold Start Performance Study for a HEV with Two Combustion Engines

    Blesinger, Georg / Zhang, Hongyang / Toedter, Olaf et al. | SAE Technical Papers | 2021
    exhaust systems of the two ICEs are proposed. The effect of the combination of oil heating and electric heating on the fuel consumption of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Starters and starting

    Engineering Challenges in Alloy Wheel Rim for Safety Simulations

    Gese, Helmut / Daphal, Pratap / Khare, Pratyush et al. | SAE Technical Papers | 2021
    considering its brittle nature, porosity and inhomogeneity in material properties across different regions of wheel rim due to mold design, cooling ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Active Thermal Management of High Power LED Array

    Chidambaram, Ramesh / A, Rammohan | SAE Technical Papers | 2021
    conventional method for LED thermal management involves passive cooling using heat sinks and coolant fluid. The present work emphasizes active cooling ...
    Verlag: Society of Automotive Engineers , SAE International

    Numerical Approach to Simulate Automotive Heater Hose Slip-Off Using Statistical Analysis

    Shrivastava, Abhinav / Prasad, Chandrashekar / Narayanan, Divaker et al. | SAE Technical Papers | 2021
    union pipe, a rubber heater hose and a spring clamp on the engine side of the vehicle. A suitable hyperelastic model for nylon-reinforced rubber ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Failure modes and effects analysis

    Methodology Development for Open Station Tractor OEL Noise Assessment in the Virtual Environment

    Chavan, Amit / K, Somasundaram / gunasekaran, pandiyanayagam | SAE Technical Papers | 2021
    characterize the major noise source such as engine, exhaust system and cooling fan using the measured data. Primarily Sound pressure levels (SPL) has ...
    Verlag: Society of Automotive Engineers , SAE International

    A Novel Methodology to Characterize the Thermal Behavior of Automotive Seats

    Curran, Allen / Packard, Corey / Gebbie, James et al. | SAE Technical Papers | 2021
    manufacturers must rely on subjective ratings to understand how the construction of a seat and its underlying heating and cooling technology may compare ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Seats and seating

    Container type livestock transport vehicle

    Freier Zugriff
    JIANG FENG / WU RUI / WANG BAONING et al. | Europäisches Patentamt | 2021
    collecting box is arranged at the lower part of each livestock single bin, and a spraying system and a feeding system are arranged on the inner wall ...

    Machine Learning based Operation Strategy for EV Vacuum Pump

    Mullapudi, Dattatreyudu / Dake, Prudhvi / mohan, Somanathan | SAE Technical Papers | 2021
    to fuel economy and range improvement and emission reduction. Since there is no provision for cooling arrangement in Electric vehicles ...
    Verlag: Society of Automotive Engineers , SAE International

    Thermal Aeroelastic Characteristics of Inflatable Reentry Vehicle Experiment (IRVE) in Hypersonic Flow

    Freier Zugriff
    Jie Wu / Zhang Zhang / Anping Hou et al. | DOAJ | 2021
    boundary layer has great influence on aeroheating due to the heat dissipation, and the skin deformation also increases the surface friction and ...

    Prediction of Vehicle Headlamp Condensation Phenomenon Using Computational Fluid Dynamics

    Biswas, Kundan / Joshi, Vivek | SAE Technical Papers | 2021
    The main task of the automotive headlights on cars is to illuminate the roadway and facilitate the driver fatigue-free and safe driving. An ...
    Verlag: Society of Automotive Engineers , SAE International