Synonyme wurden verwendet für: Modellbildung
Suche ohne Synonyme: keywords:(Modellbildung)

1–50 von 1,059 Ergebnissen
|

    Advances in Aircraft System Identification at NASA Langley Research Center

    Morelli, Eugene A. / Grauer, Jared A. | AIAA | 2023
    Schlagwörter: frequency-domain modeling , dynamic modeling in turbulence , aeroelastic modeling , global modeling

    Advancing Mistuning Identification and Dynamic Modeling of Blisks Through Blade Detuning Tests

    Zhou, Biao / Li, Ankang / Battiato, Giuseppe et al. | AIAA | 2024
    Schlagwörter: Dynamic Modelling

    Efficient Model Updating Method for System Identification Using a Convolutional Neural Network

    Sung, Heejun / Chang, Seongmin / Cho, Maenghyo | AIAA | 2021
    Schlagwörter: Numerical Modeling , Finite Element Modeling , Structural Modeling

    Mixed Fidelity Shape Models for Efficient Small Body Gravity Modeling

    Pedros-Faura, Anivid / McMahon, Jay W. | AIAA | 2023
    Schlagwörter: Shape Modeling , Gravity Modeling

    Three-Dimensional Accurate Geometric Modeling and Mechanical Analysis of Wire Mesh for Deployable Antennas

    Li, Zhuolin / Zhang, Han / Li, Yusheng et al. | AIAA | 2024
    Schlagwörter: Finite Element Modeling , Structural Modeling

    Multi-Element Gaseous Methane–Oxygen Rocket Combustor Optimization for Modern Space-Flight Technology

    Purohit, Kirankumar / Sharma, Abhishek / Vaidyanathan, Aravind et al. | AIAA | 2023
    Schlagwörter: Computational Modeling , Combustion Modeling

    Clarification: Edge-Based Finite Element Modeling of Magnetogasdynamic-Based Propulsion Systems

    Zhang, Wenbo / Habashi, Wagdi G. / Salah, Nizar Ben et al. | AIAA | 2019
    Schlagwörter: Finite Element Modeling

    Posteriori Error Estimation Method for Flexibility-Based Component Mode Synthesis

    Kim, Jin-Gyun / Lee, Phill-Seung | AIAA | 2015
    Schlagwörter: Finite Element Modeling , Structural Modeling

    Pilot Behavior Model in Pursuit and Preview Tracking Tasks

    Efremov, Aleksandr / Tiaglik, Mikhail / Irgaleev, Iliyas | AIAA | 2022
    Schlagwörter: Pilot Modeling , Structural Modeling

    Surrogate Modeling Accelerated Shape Optimization of Deployable Composite Tape-Spring Hinges

    Jin, Hao / Jia, Qilong / An, Ning et al. | AIAA | 2022
    Schlagwörter: Numerical Modeling , Finite Element Modeling

    Deployment Dynamics of Thin-Shell Space Structures

    Pedivellano, Antonio / Pellegrino, Sergio | AIAA | 2022
    Schlagwörter: Finite Element Modeling , Numerical Modeling

    Multifidelity Framework for Small Satellite Thermal Analysis

    Kontaxoglou, Anastasios / Tsutsumi, Seiji / Khan, Samir et al. | AIAA | 2023
    Schlagwörter: Thermal Modeling and Analysis , Multifidelity Modeling

    Validation of Models for Net Deployment and Capture Simulation with Experimental Data

    Boonrath, Achira / Botta, Eleonora M. | AIAA | 2023
    Schlagwörter: Lumped Element Modeling , Cable Modeling

    Force/Moment-Conserving Pressure Mapping Scheme for Fluid/Structure Interaction Analysis

    Beom Lee, Kyu / Yeon Cho, Jin / Ho Kim, Jeong | AIAA | 2023
    Schlagwörter: Finite Element Modeling , Structural Modeling and Simulation

    Helicopter Harsh Landing Events: A Computational Hybrid Methodology to Estimate Fuselage Damage

    Vallone, G. / Manes, A. / Sbarufatti, C. et al. | AIAA | 2013
    Schlagwörter: Finite Element Modeling , Numerical Modeling

    Multiphase Effects on Solid Rocket Nozzle Performance

    Grossi, Marco / Sereno, Alessio / Bianchi, Daniele et al. | AIAA | 2023
    Schlagwörter: Computational Modeling , Multiphase Flow Modeling

    Structural Damage Detection Based on Proper Orthogonal Decomposition: Experimental Verification

    Galvanetto, Ugo / Surace, Cecilia / Tassotti, Alessandra | AIAA | 2008
    Schlagwörter: Finite Element Modeling , Numerical Modeling

    Design, Requirements, and Performance of Space Vehicles with Simple Solar Photon Thrusters

    Corrado, Guillermo A. / Schulz, Walkiria | AIAA | 2021
    Schlagwörter: Numerical Modeling , Finite Element Modeling

    Investigation About the Structural Nonlinearities of an Aircraft Pylon

    Gilioli, A. / Manes, A. / Ringertz, U. et al. | AIAA | 2018
    Schlagwörter: Numerical Modeling , Structural Modeling

    Effect of Ply Orientation on the In-Depth Response of Carbon-Phenolic Ablative

    Phadnis, Tushar R. / Raveendranath, P. / Jayachandran, T. | AIAA | 2020
    Schlagwörter: Numerical Modeling , Thermal Modeling

    Natural Frequencies of a Heated Plate: Theory and Experiment

    Freydin, Maxim / Levin, Dani / Dowell, Earl H. et al. | AIAA | 2020
    Schlagwörter: Finite Element Modeling , Structural Modeling

    Dynamics Analysis of Spatial Landing-Gear Mechanism with Hinge Clearance and Axis Deviation

    Yin, Yin / Xu, Kui / Nie, Hong et al. | AIAA | 2020
    Schlagwörter: Numerical Modeling , Finite Element Modeling

    Updating Geometrically Nonlinear Reduced-Order Models Using Nonlinear Modes and Harmonic Balance

    Van Damme, Christopher I. / Allen, Matthew S. / Hollkamp, Joseph J. | AIAA | 2020
    Schlagwörter: Numerical Modeling , Finite Element Modeling

    Analytic Approach to the Shock Response Spectrum of Friction Joints

    Kashani, H. | AIAA | 2019
    Schlagwörter: Finite Element Modeling , Numerical Modeling

    Slotted Waveguide Stress Concentration Factor

    Brooks, Joseph / Canfield, Robert A. | AIAA | 2022
    Schlagwörter: Finite Element Modeling , Numerical Modeling

    Optimal Distribution of the Disk Load: Validity of the Betz–Joukowsky Limit

    Bontempo, Rodolfo / Manna, Marcello | AIAA | 2022
    Schlagwörter: Numerical Modeling , Vortex Modeling

    Geometric Sketch Constraint Solving with User Feedback

    Dixon, Bridget M. / Dannenhoffer, John F. | AIAA | 2014
    Schlagwörter: Solid Modeling

    Issues with Proportional Damping

    Kabe, A. M. / Sako, B. H. | AIAA | 2016
    Schlagwörter: Finite Element Modeling

    Deep Learning Closure of the Navier–Stokes Equations for Transition-Continuum Flows

    Nair, Ashish S. / Sirignano, Justin / Panesi, Marco et al. | AIAA | 2023
    Schlagwörter: Reduced Order Modelling

    Numerical Simulation of Bird Strike on Jet Engine Considering Bird Ingestion Requirements

    Li, Junjie / Lou, Yunfeng / Chai, Xianghai et al. | AIAA | 2021
    Schlagwörter: Numerical Modeling , Finite Element Modeling

    Performance Model Identification of the General Electric CF34-8C5B1 Turbofan Using Neural Networks

    Andrianantara, Rojo Princy / Ghazi, Georges / Botez, Ruxandra Mihaela | AIAA | 2023
    Schlagwörter: Modeling and Simulation , Engine Performance Modeling

    Supersonic Flutter and Buckling Optimization of Tow-Steered Composite Plates

    Guimarães, Thiago A. M. / Castro, Saullo G. P. / Cesnik, Carlos E. S. et al. | AIAA | 2018
    Schlagwörter: Structural Modeling , Finite Element Modeling

    Experimental Investigation on Thermal Buckling Behavior of Truss-Core Sandwich Panels

    Yuan, Wu / Song, Hongwei / Wang, Xi et al. | AIAA | 2014
    Schlagwörter: Numerical Modeling , Finite Element Modeling

    Optimization of the Active Control of Turboprop Cabin Noise

    Romeu, Jordi / Palacios, J. Ignacio / Balastegui, Andreu et al. | AIAA | 2015
    Schlagwörter: Finite Element Modeling , Numerical Modeling

    Vacuum and Hover Tests of a Dihedral–Anhedral Tip Composite Rotor

    Chi, Cheng / Datta, Anubhav / Panda, Brahmananda | AIAA | 2023
    Schlagwörter: Structural Modeling and Simulation , Finite Element Modeling

    Nonlinear Vibro-Acoustic Analysis of Composite Sandwich Plates with Skin–Core Debondings

    Qu, Y. / Meng, G. | AIAA | 2017
    Schlagwörter: Structural Modeling , Finite Element Modeling

    Calibration and Uncertainty Analysis for Computer Simulations with Multivariate Output

    McFarland, John / Mahadevan, Sankaran / Romero, Vicente et al. | AIAA | 2008
    Schlagwörter: Finite Element Modeling , Heat Transfer Modeling

    Impact of Low-Order Modeling on Aeroelastic Predictions for Very Flexible Wings

    Riso, Cristina / Cesnik, Carlos E. S. | AIAA | 2022
    Schlagwörter: Finite Element Modeling , Structural Modeling

    High-Fidelity Flexibility-Based Component Mode Synthesis Method with Interface Degrees of Freedom Reduction

    Kim, Jin-Gyun / Markovic, Damijan | AIAA | 2016
    Schlagwörter: Finite Element Modeling , Structural Modeling

    Prioritizing Possible Force Models Error in Multiphase Flow Using Global Sensitivity Analysis

    Nili, Samaun / Park, Chanyoung / Kim, Nam H. et al. | AIAA | 2021
    Schlagwörter: Numerical Modeling , Heat Transfer Modeling

    Dynamic Characteristics Prediction of Large Structures by Component Modal Tests

    Misawa, Masayoshi / Nakajima, Jyunichi / Kawasoe, Hidenori | AIAA | 2013
    Schlagwörter: Finite Element Modeling

    Investigation of Fluid-Induced Vibration and Heat Transfer of Helical Elastic Coiled Tube

    Ji, Jiadong / Gao, Runmiao / Shi, Baojun et al. | AIAA | 2021
    Schlagwörter: Finite Element Modeling , Structural Modeling

    Effect of Stacking Sequence on Open-Hole Tensile Strength of Composite Laminates

    Hallett, Stephen R. / Jiang, Wen-Guang / Wisnom, Michael R. | AIAA | 2009
    Schlagwörter: Finite Element Modeling , Numerical Modeling

    Effect of Solid Mass Consumption on the Free-Vibration Analysis of Launchers

    Carrera, E. / Cavallo, T. / Zappino, E. | AIAA | 2016
    Schlagwörter: Finite Element Modeling , Structural Modeling

    Numerical Investigation of Compressor Blades Deformation During Stall Development into Surge

    Halawa, Taher / Gadala, Mohamed S. | AIAA | 2017
    Schlagwörter: Numerical Modeling , Structural Modeling

    Deterministic and Probabilistic Approaches to Model and Update Dynamic Systems

    Cooper, Jared K. / DeVore, Michael / Reed, Adam et al. | AIAA | 2023
    Schlagwörter: Unsteady Aerodynamic Modeling , probabilistic modeling

    Surrogate Modeling Approach to Support Real-Time Structural Assessment and Decision Making

    Mainini, L. / Willcox, K. | AIAA | 2015
    Schlagwörter: Finite Element Modeling , Surface Modeling

    Reply by the Authors to T. E. Tezduyar

    Zhang, Wenqing / Accorsi, Michael L. / Leonard, John W. | AIAA | 2008
    Schlagwörter: Structural Modeling

    Buckling Alleviation for Joined-Wing Aircraft

    Lambert, Luke A. / Cooper, Jonathan E. / Nangia, Raj K. | AIAA | 2016
    Schlagwörter: Structural Modeling , Finite Element Modeling

    Design, Manufacturing and Wind Tunnel Validation of a Morphing Compliant Wing

    De Gaspari, Alessandro / Riccobene, Luca / Ricci, Sergio | AIAA | 2018
    Schlagwörter: Numerical Modeling , Finite Element Modeling