1–50 von 107 Ergebnissen
|

    Retained Austenite Stability and Impact Performance of Advanced High Strength Steel at Reduced Temperatures

    Enloe, C. Matthew / Coryell, Jason / Wang, Jeff | SAE Technical Papers | 2017

    Multi-Point Mesh Modeling and Nonlinear Multi-Body Dynamics of Hypoid Geared System

    Yang, Junyi / Lim, Teik C. / Wang, Yawen | SAE Technical Papers | 2013

    Puffing and Micro-Explosion Phenomena of Water Emulsion Fuels

    Wang, C. L. / Tsao, K. C. | SAE Technical Papers | 1986

    Tribodynamics of Spiral Bevel Gears under Mixed Elastohydrodynamic Lubrication

    Conjeevaram Gopalakrishnan, Srikumar / Lim, Teik C. / Wang, Yawen | SAE Technical Papers | 2023

    Error Analysis of Curvature-Based Contour Measurement Devices

    Wang, C. / Bass, C. R. / Crandall, J. | SAE Technical Papers | 2000

    Optimization of Hypoid Gear Tooth Profile Modifications on Vehicle Axle System Dynamics

    Lin, Chia-Ching / Wang, Kan / Sun, Shouli et al. | SAE Technical Papers | 2019

    Reliability Analysis of Data with No Failure from Fleet and Proving Ground Endurance Tests

    Wang, C. Julius / Baker, David C. | SAE Technical Papers | 1992

    Knock Thresholds and Stochastic Performance Predictions: An Experimental Validation Study

    Peyton Jones, James C. / Prucka, Robert / Shayestehmanesh, Saeed et al. | SAE Technical Papers | 2019

    Origins of Diesel Particulate Mass Emission

    Wang, C. H. T. / Greeves, G. | SAE Technical Papers | 1981

    A Study of Mass Burning Rate of a Small Industrial Spark Ignition Engine

    Wang, C. L. / Tsao, K. C. | SAE Technical Papers | 1986

    A Component Test Methodology for Simulation of Full-Vehicle Side Impact Dummy Abdomen Responses for Door Trim Evaluation

    Sherwood, Bill / Wang, Chase / Chou, Clifford C. et al. | SAE Technical Papers | 2011

    Direct Injection Compressed Natural Gas Combustion and Visualisation

    Wang, Deanna E. / Watson, Harry C. | SAE Technical Papers | 2000

    Active Vibration Control to Suppress Gear Mesh Response

    Wang, Jun / Li, Mingfeng / Lim, Teik C. | SAE Technical Papers | 2007

    Time-Varying Non-Linear Dynamics of a Hypoid Gear Pair for Rear Axle Applications

    Wang, Jun / Li, Mingfeng / Lim, Teik C. | SAE Technical Papers | 2007

    Performance of Gasoline-Water Fuel in a Modified SI Engine

    Wang, C. L. / Miller, E. M. / Tsao, K. C. | SAE Technical Papers | 1984

    The Lubricity Requirement of Low Sulfur Diesel Fuels

    Reynolds, D. J. / Wang, J. C. | SAE Technical Papers | 1994

    Regenerative Braking Concepts for Electric Vehicles - A Primer

    Wyczalek, Floyd A. / Wang, Tsih C. | SAE Technical Papers | 1992

    Predicting Lubricity of Low Sulfur Diesel Fuel

    Cusano, Carmen M. / Wang, Jerry C. | SAE Technical Papers | 1995

    Sulfur Management of NOx Adsorber Technology for Diesel Light-duty Vehicle and Truck Applications

    Wan, C. Z. / Fang, Howard L. / Wang, Jerry C. et al. | SAE Technical Papers | 2003

    Electric Vehicle Regenerative Braking

    Wyczalek, Floyd A. / Wang, Tsih C. | SAE Technical Papers | 1992

    Measurement of N2 Solubility in Polypropylene and Ethene/Octene Copolymer

    Park, C. B. / Li, G. / Wang, J. | SAE Technical Papers | 2006

    Plane Strain Deep Drawing: Finite Element Modeling and Measurements

    Wang, C.-T. / Wagoner, R. H. | SAE Technical Papers | 1991

    Effect of Surface Pretreatments on Adhesive Bonding and Corrosion Resistance of AM60B, AZ31-H24, and AM30 Magnesium

    Lazarz, Kimberly / Mallick, P. K. / McCune, Robert C. et al. | SAE Technical Papers | 2009

    Analytic Solution of Mode I Stress Intensity Factor for Spot Welds in Lap-Shear Specimens

    Wang, D.-A. / Pan, J. / Lin, P.-C. | SAE Technical Papers | 2006

    Virtual Cylinder Pressure Sensor (VCPS) with Individual Variable-Oriented Independent Estimators

    Roberts, Charles E. / Wang, Junmin / Roecker, Ryan C. | SAE Technical Papers | 2005

    High Temperature Liquid Lubricant Development Part I: Engine Tests

    Wang, J. C. / Sublette, M. A. | SAE Technical Papers | 1993

    Direct Measurement of EGR Cooler Deposit Thermal Properties for Improved Understanding of Cooler Fouling

    Sluder, C. Scott / Wang, Hsin / Storey, John M. E. et al. | SAE Technical Papers | 2009

    Interaction Between Fuel Additive and Oil Contaminant: (II) Its Impact on Fuel Stability and Filter Plugging Mechanism

    Stehouwer, David M. / Fang, Howard L. / Wang, Jerry C. | SAE Technical Papers | 2003

    Continuous-Combustion Gas Generator Engine: Zero-Dimensional Modeling Study

    Chung, C. T. / Wang, Lin-Shu | SAE Technical Papers | 1993

    Wear Mechanisms of Valve Seat and Insert in Heavy Duty Diesel Engine

    Bennett, C. / Barber, G. C. / Schaefer, S. K. et al. | SAE Technical Papers | 1995

    Assessment of RNG Turbulence Modeling and the Development of a Generalized RNG Closure Model

    Wang, Bao-Lin / Petersen, Benjamin / Miles, Paul C. et al. | SAE Technical Papers | 2011

    Development of a Bench Test to Detect Oils Corrosive to Engine Components

    Cusano, Carmen M. / Wang, Jerry C. | SAE Technical Papers | 1994

    Open-Loop Chestbands for Dynamic Deformation Measurements

    Chou, C. / Wang, C. / Bass, C. R. et al. | SAE Technical Papers | 1998

    Measurement of Swelling for PP/Gas Mixtures

    Park, C. B. / Wang, J. / Li, Y. G. | SAE Technical Papers | 2005

    Investigation and Correction of Sheet Metal Distortion in Draw Operation

    Wang, Hui-Ping / Zhao, Kunmin / Hu, Ping et al. | SAE Technical Papers | 2010

    On Improving the Accuracy of Springback Prediction and Die Compensation

    Wang, C. T. / Zhang, Jimmy / Zhao, Kunmin et al. | SAE Technical Papers | 2007

    Comparisons of Computed and Measured Results for a HSDI Diesel Engine Operating Under HCCI Mode

    Lee, Chia-fon F. / Wang, Robert C. / Fang, Tiegang | SAE Technical Papers | 2006

    Probabilistic Evaluation of Automotive Cold Cranking Performance

    Wang, C. Julius / Misiti, Paul D. | SAE Technical Papers | 1991

    Factors Affecting Smoke and Gaseous Emissions from Direct Injection Engines and a Method of Calculation

    Wang, C. H. T. / Greeves, G. / Khan, I. M. | SAE Technical Papers | 1973

    Measurement of Gas Solubility for PP/Blowing-Agent Mixtures

    Park, C. B. / Li, G. / Wang, J. et al. | SAE Technical Papers | 2005

    An Improvement on Low Temperature Combustion in Neat Biodiesel Engine Cycles

    Reader, Graham T. / Tjong, Jimi / Wang, Meiping et al. | SAE Technical Papers | 2008

    Modeling of Li-ion Battery Performance in Hybrid Electric Vehicles

    Wang, C. Y. / Kwon, O. J. / Fang, W. F. et al. | SAE Technical Papers | 2009

    A Fatigue Life Prediction Method for Tensile-Shear Spot Welds

    Lawrence, F. V. / Corten, H. T. / Wang, P. C. | SAE Technical Papers | 1985

    Verification and Validation of Roof Bolter Simulation Models for Studying Events between a Machine and its Operator

    Ambrose, Dean H. / Bartels, John R. / Wang, Richard C. | SAE Technical Papers | 2001

    Origins of Hydrocarbon Emissions from Diesel Engines

    Wang, C. H. T. / Greeves, G. / Fenne, I. et al. | SAE Technical Papers | 1977