1–20 von 590 Ergebnissen
|

    Evaluation of the effective mass of the body for helmet impacts

    Ghajari, Mazdak / Peldschus, Steffen / Galvanetto, Ugo et al. | Taylor & Francis Verlag | 2011

    Currently available motorcycle helmet standards employ headforms to assess the impact absorption capability of helmets. The mass and

     ...

    Evaluation of the kinematics and injury potential to different sizes of pedestrians impacted by a utility vehicle with a frontal guard

    Moradi, Rasoul / Lankarani, Hamid M. | Taylor & Francis Verlag | 2011

    A review of accident data reveals that in most pedestrian accidents, the head and lower extremity injuries are the predominant areas of

     ...

    Injury severity of occupants in lateral collisions in standard and small vehicles: Analysis of ITARDA's in-depth investigation data

    Hitosugi, M. / Tokudome, S. | Taylor & Francis Verlag | 2011
    vehicles in lateral collision. From the in-depth data of the Institute for Traffic Accident Research and Data Analysis (ITARDA) from 1993 to 2003 ...

    A study on inversion of metallic thin-walled conical shells

    Gupta, P. K. | Taylor & Francis Verlag | 2011

    The paper presents an experimental and computational study of the inversion process of metallic thin-walled conical shells subjected to

     ...
    Schlagwörter: mode of deformation

    External biofidelity in lateral impact measurement of global and local forces

    Parent, Daniel P. / Shaw, C. Greg / Lessley, David J. et al. | Taylor & Francis Verlag | 2011

    A study was conducted to develop high-resolution external biofidelity data for the response of post-mortem human surrogates (PMHS) in

     ...

    Multi-objective optimisation and sensitivity analysis of a paratransit bus structure for rollover and side impact tests

    Bojanowski, Cezary / Kulak, Ronald F. | Taylor & Francis Verlag | 2011

    Paratransit buses are heavily used in the United States. A paratransit bus consists of custom passenger compartments mounted onto

     ...

    Comprehensive computational rollover sensitivity study, Part 1: influence of vehicle pre-crash parameters on crash kinematics and roof crush

    Parent, Daniel P. / Kerrigan, Jason R. / Crandall, Jeff R. | Taylor & Francis Verlag | 2011

    In 2008, fatalities resulting from vehicle rollover events accounted for over one third of all fatalities resulting from motor vehicle

     ...

    Performance limit analysis for common roadside and median barriers using LS-DYNA

    Ferdous, M. R. / Abu-Odeh, Akram / Bligh, Roger P. et al. | Taylor & Francis Verlag | 2011

    Performance limits of commonly used barriers in terms of acceptable vehicle impact heights were identified using non-linear finite

     ...

    Test system, vehicle and occupant response repeatability evaluation in rollover crash tests: the deceleration rollover sled test

    Kerrigan, Jason R. / Dennis, Nathaniel J. / Parent, Daniel P. et al. | Taylor & Francis Verlag | 2011

    The goal of this study was to evaluate the repeatability afforded by a rollover test system in terms of the test conditions, vehicle and

     ...

    Editorial Board

    Taylor & Francis Verlag | 2011

    An Optimized Content Replication and Distribution Framework for Vehicular Networks

    Caviglione, Luca / Cervellera, Cristiano | Taylor & Francis Verlag | 2011
    advantage of peculiarities of vehicular networks. This article introduces an optimized framework, on the basis of peer-to-peer principles, to manage ...

    Behaviour of helmets during head impact in real accident cases of motorcyclists

    Bourdet, N. / Deck, C. / Tinard, V. et al. | Taylor & Francis Verlag | 2012
    motorcyclist's head protection and is focused on the behaviour of the helmet during simulated head impact in real accident cases. The analysis of real ...

    Application of FRP in a vehicle for Student Formula SAE Competition of Japan

    Yang, Y. / Wu, X. / Terada, S. et al. | Taylor & Francis Verlag | 2012
    of fibre reinforced plastics (FRPs), it is proved that the energy absorption capability of a given FRP can be altered quite significantly by ...

    Assessment of the protective performance of hood using head FE model in car-to-pedestrian collisions

    Peng, Yong / Han, Yong / Chen, Yong et al. | Taylor & Francis Verlag | 2012

    The objective of the present study was to present a method to assess the protective performance of a passenger car hood to decrease

     ...

    Crashworthiness optimisation of vehicle structures with magnesium alloy parts

    Parrish, Andrew / Rais-Rohani, Masoud / Najafi, Ali | Taylor & Francis Verlag | 2012

    This paper explores the effects of replacing the baseline steel with lightweight magnesium alloy parts on crashworthiness

     ...

    Mechanical properties and failure mechanisms of closed-cell PVC foams

    Colloca, Michele / Dorogokupets, Gleb / Gupta, Nikhil et al. | Taylor & Francis Verlag | 2012

    A comprehensive study of the mechanical behaviour of closed-cell polyvinyl chloride (PVC) foams with varying densities is conducted

     ...

    Impact crash analyses of an off-road utility vehicle – part I: validation of finite-element model for body structure

    Hu, Huiwen / Lu, Zhenyuan / Wang, Jieming et al. | Taylor & Francis Verlag | 2012

    A Taiwanese manufacturer of off-road utility vehicles (OUVs) was so concerned by the increased number in U.S. accidents and federal

     ...

    Numerical investigation of energy absorbers in composite materials for automotive applications

    Boria, Simonetta / Belingardi, Giovanni | Taylor & Francis Verlag | 2012

    Nowadays, there is increasing interest in lightweight automotive structures capable of absorbing large quantities of energy in case of a

     ...

    Effect of length on crashworthiness parameters and failure modes of steel and hybrid tube made by steel and GFRP under low velocity impact

    Lima, Reza Mehryari / Ismarrubie, Z. N. / Zainudin, E. S. et al. | Taylor & Francis Verlag | 2012

    The use of tubes as energy absorption structures has been prevalent for many decades and numerous studies have been done on metal and

     ...

    Impact crash analyses of an off-road utility vehicle – part II: simulation of frontal pole, pole side, rear barrier and rollover impact crashes

    Hu, Huiwen / Lu, Wei-Jun / Lu, Zhenyuan | Taylor & Francis Verlag | 2012

    This paper, Part II of two, presents the simulations of various impact crashes for an off-road utility vehicle (OUV) to assess the

     ...