121–140 von 244 Ergebnissen
|

    Integration of Thermal Control Electronics and Monitoring Functions in a Multifunctional Structure

    Sacchi, Enrico / Gottero, Marco / Battiston, Roberto et al. | SAE Technical Papers | 2009
    (TAS-I) in cooperation with the University of Perugia (Italy). Aim of the study is the integration of thermal control, electrical and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Research and development

    Impact of Spark Assistance and Multiple Injections on Gasoline PPC Light Load

    Garcia, Antonio / Tormos, Bernardo / Monsalve-Serrano, Javier et al. | SAE Technical Papers | 2014
    strategies with the aim of evaluating performance and engine-out emissions at low load PPC range using a high octane number gasoline. For this ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Augmented Reality and Other Visualization Technologies for Manufacturing in Boeing

    Sivich, Lorrie / Davies, Paul | SAE Technical Papers | 2011
    synergistic backbone and how this approach can support the delivery of engineering design intent on the shop floor.The team is developing a system to ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Imaging and visualization , Computer software and hardware

    CFD simulation of ship turning motion in waves

    Freier Zugriff
    Wang Jianhua / Wan Decheng | DOAJ | 2019
    [Objectives] The ship turning motion can reflect the steerability of the ship during navigation and is closely related to the ship ...
    Verlag: Editorial Office of Chinese Journal of Ship Research
    Schlagwörter: Naval architecture. Shipbuilding. Marine engineering

    Measurements of Residual Stresses in Aluminum Wheels Using the Techniques of XRD, Strain Gages and FEA Simulation - A Comparison

    Souza, Armando / Betini, Evandro Giuseppe / Rola, Fabio et al. | SAE Technical Papers | 2016
    . Many engineering specifications, manufacturing procedures, inspection and quality control have begun to require that the residual stress of a ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    An Integrated Approach for Modeling, Analysis and Optimization of Systems whose Design Follows the EAST-ADL2/AUTOSAR Methodology

    Mraidha, Chokri / Wozniak, Ernest / Tucci-Piergiovanni, Sara et al. | SAE Technical Papers | 2013
    an optimization at the early stage of a system design. Optimization technique uses genetic algorithms and the early stage optimization goals ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Research and development , Tools and equipment

    Solid Phase Extraction Mechanistic Studies of the Ag(I)-DMABR Complex: Improving Efficiency of the C-SPE Standard Method of Analysis

    Siperko, Lorraine M. / Porter, Marc D. / Lipert, Robert J. | SAE Technical Papers | 2008
    ground-based analyses of companion samples.In keeping with the mission of our research, we are constantly refining the efficiency and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development

    The Future of Automotive Design & Development: 3D for All

    Baughey, Kevin | SAE Technical Papers | 2009
    PLM beyond engineering and manufacturing to include everyone who has a role in the life of a vehicle from business users to end consumers ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Collaboration and partnering , Research and development , Tools and equipment

    Safety Performance and Benefits of Heavy Truck Stability Control: Providing Insight into Compliance Evaluation

    Blower, Daniel / Woodrooffe, John / Green, Paul E. | SAE Technical Papers | 2012
    testing with the analysis of independent crash datasets using engineering and statistical techniques to estimate the probable safety benefits of ...
    Verlag: Society of Automotive Engineers , SAE International

    Development of a Path-following and a Speed Control Driver Model for an Electric Vehicle

    McPhee, John / Jalali, Kiumars / Lambert, Steve | SAE Technical Papers | 2012
    and developed at the University of Waterloo. In order to evaluate the handling and performance of such a vehicle in the design stage and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    A Comparison of Combustion and Emissions Behaviour in Optical and Metal Single-Cylinder Diesel Engines

    Thirouard, Benoist / Kashdan, Julian T. | SAE Technical Papers | 2009
    Single cylinder optical engines are used for internal combustion (IC) engine research as they allow for the application of qualitative and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Magnetohydrodynamic Mixed Convection and Entropy Analysis of Nanofluid in Gamma-Shaped Porous Cavity

    Chamkha, Ali J. / Mansour, Mohamed Ahmed / Rashad, Ahmed Mohamed et al. | AIAA | 2020
    this research by the finite volume technique. There exists an internal heating generation inside the cavity and the top and bottom walls are ...
    Verlag: The American Institute of Aeronautics and Astronautics

    1D Simulation and Experimental Analysis of a Turbocharger Compressor for Automotive Engines under Unsteady Flow Conditions

    Bozza, Fabio / Capobianco, Massimo / Marelli, Silvia et al. | SAE Technical Papers | 2011
    the University of Naples to predict automotive turbocharger compressor performance both under steady and unsteady flow conditions. A classical ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Experimental Evaluation of Two Pitot Free Analytical Redundancy Techniques for the Estimation of the Airspeed of an UAV

    Napolitano, Marcello / Fravolini, Mario Luca / Rhudy, Matthew et al. | SAE Technical Papers | 2014
    objective of this study is to establish the accuracy and reliability of the two airspeed estimation techniques for eventual use as the basis for ...
    Verlag: Society of Automotive Engineers , SAE International

    Bandit: Technologies for Proximity Operations of Teams of Sub-10Kg Spacecraft

    M. A. Swartwout | NTIS | 2007
    fidelity and performance of our 3DOF hardware testbed and 6DOF simulator; develop, test and evaluate two methods for autonomous multi-vehicle ...
    Verlag: Washington Univ., St. Louis. MO. Dept. of Systems Mechanical and Aerospace Engineering
    Schlagwörter: Operations Research , Space Technology

    Application of Dynamic Phasor Concept in Modeling Aircraft Electrical Power Systems

    Asher, Greg / Bozhko, Serhiy / Yang, Tao | SAE Technical Papers | 2013
    distribution system with increased numbers of power electronic converters (PEC) and electrical loads. The overall system performance and the power ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Vibration Test Specification Design and Reliability Analysis

    Hsueh, Chin-Duo / Chang, Jung-Ming / Lin, Ken-Yuan et al. | SAE Technical Papers | 2011
    parameters of a complex structure made of composite plastics. Our research correlates customer usage with the Proving Ground and compresses the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development

    Resistor-Network Formulation of Multitemperature Forced-Convection Problems

    Foroushani, Sepehr / Naylor, David / Wright, John L. | AIAA | 2016
    an ongoing research project on the resistor-network modeling and characterization of multitemperature convection problems. ...
    Verlag: The American Institute of Aeronautics and Astronautics

    Schlieren Methodology for the Analysis of Transient Diesel Flame Evolution

    Briceño, Francisco J. / Garcia-Oliver, Jose M / Pastor, Jose V. et al. | SAE Technical Papers | 2013
    Schlieren/shadowgraphy has been adopted in the combustion research as a standard technique for tip penetration analysis of sprays under ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Imaging and visualization

    Prediction of a Container Ship Squat in Suez Canal Using CFD

    Freier Zugriff
    Osama El Desouky / yasser Elhenawy | DOAJ | 2022
    critical grounding resounded around the world and were still felt after the Ever-Given container ship was freed from the banks. The results of a ...
    Verlag: Port Said University
    Schlagwörter: Engineering (General). Civil engineering (General)