1–20 von 39 Ergebnissen
|

    Modelling Acoustic Trims in FEM, an Overview of the Different Simulation Methods

    Golota, Anton / Caillet, Arnaud / Alimonti, Luca | SAE Technical Papers | 2016
    part will be studied. For each case, the results will be discussed and the best compromise for modeling time and results quality will be ...
    Schlagwörter: Simulation and modeling

    Enhancement of Full-Vehicle Road Noise Simulation Including Detailed Road Surface and Innovative Tire Modeling

    Camia, Andrea / Vige, Davide / Bartolozzi, Giorgio et al. | SAE Technical Papers | 2016
    used to obtain the FE models of tires and suspension system. A particular focus is on the modeling of tires, since the typically used “modal ...
    Schlagwörter: CAD, CAM, and CAE , Simulation and modeling

    Fuel consumption and emission modeling for urban scenarios

    Dallmeyer, Jörg / Taubert, Carsten / Lattner, Andreas D. et al. | Tema Archiv | 2012
    . The model is evaluated on different scenarios with focus on innercity simulation. The results indicate that the simulation of bicycles and ...
    Schlagwörter: Simulation , Modellierung

    A TRASS-based agent model for traffic simulation

    Lotzmann, Ulf / Möhring, Michael | Tema Archiv | 2008
    This paper focuses on traffic simulation generated by the multi-agent simulation framework TRASS (Traffic Simulation System). TRASS-based ...
    Schlagwörter: Simulationsmodell

    Development and use of a generic AS/RS sizing simulation model

    Rajanna, Srinivas / Williams, Edward / Ülgen, Onur M. et al. | Tema Archiv | 2012
    As usage of simulation analyses becomes steadily more important in the design, operation, and continuous improvement of manufacturing ...
    Schlagwörter: Simulation

    European Conference on Cognitive Science Approaches to Process Control (5th). Held in Espoo, Finland on August 30-September 1, 1995

    L. Norros | NTIS | 1995
    , and on the design of informative interfaces for the automation systems. The main topics in the conference were control of safety and human ...
    Schlagwörter: Computerized simulation

    The template model approach for PLC simulation in an automotive industry

    Ko, Minsuk / Chang, Daesoon / Wang, Ginam et al. | Tema Archiv | 2012
    simulation of control verification for shortening the commissioning which has a lot of trial and error is in progress. Also, simulation of control ...
    Schlagwörter: Simulation , PLC simulation

    Approximation of pedestrian effects in urban traffic simulation by distribution fitting

    Lattner, Andreas D. / Dallmeyer, Jörg / Paraskevopoulos, Dimitrios et al. | Tema Archiv | 2012
    For a proper simulation of urban traffic scenarios, besides cars other road users, namely bicycles and pedestrians, have to be modeled. In ...
    Schlagwörter: Simulation

    Modeling and Controlling Acoustic Performance of Heterogeneous Materials Made of Recycled Foams

    Romeyns, Barbara / Chevillotte, Fabien / Marchetti, Fabien et al. | SAE Technical Papers | 2022
    methodology is applied on three heterogeneous assemblies of compressed foams flakes. The main influencing parameters and the key steps of the ...
    Schlagwörter: Simulation and modeling

    Current Challenges and Frontiers for the EHD Simulation of Journal Bearings: a Review

    Offner, Günter / Allmaier, Hannes | SAE Technical Papers | 2016
    , downspeeding, start-stop and the continuing demand for increasing fuel efficiency impose new demands and challenges also on the simulation methodology ...
    Schlagwörter: Combustion and combustion processes , Simulation and modeling

    A Coupled Simulation Approach for the Quantification of Impact Events in Automotive Applications

    Ravi, Chandan / Reddy, Hari / Rao, Sohan et al. | SAE Technical Papers | 2022
    and quantifying these issues at the design and virtual validation stage is of prime importance. Current simulation methodologies estimate the ...
    Schlagwörter: Simulation and modeling , Interior molding and trim

    3d-Elastohydrodynamic Simulation Model for Structure-Borne Noise Analyses of a DI Diesel Engine

    Eichlseder, Helmut / Seifriedsberger, Johannes / Wichtl, Rudolf | SAE Technical Papers | 2016
    noise excitation of the engine structure and the occurring acceleration on the engine surface. Additionally, the influence of a varying piston ...
    Schlagwörter: Simulation and modeling

    On the Calculation and Measurement of Modal Damping

    Hameyer, Kay / Franck, Marius / Jaeger, Markus | SAE Technical Papers | 2022
    from various and partly nonlinear effects. In practice this leads to the necessity of prototypes to measure the damping, which this ...
    Schlagwörter: Simulation and modeling

    Real life grasping using an under-actuated robot hand: simulation and experiments

    Freier Zugriff
    Tegin, Johan / Iliev, Boyko / Skoglund, Alexander et al. | BASE | 2009
    Proceedings of: 14th International Conference on Advanced Robotics (ICAR 2009), 22-26 June 2009, Munich (Germany) ; We present a system ...
    Schlagwörter: Modeling , Simulation

    The process of an optimized heat radiation intensity calculation on a mould surface

    Mlynek, Jaroslav / Srb, Radek | Tema Archiv | 2012
    This article is focused on the optimization of heat radiation intensity across the surface of an aluminium mould. The mould is warmed by ...

    Effects of Boundary Layer and Local Volumetric Cells Refinements on Compressor Direct Noise Computation

    Pietroniro, Asuka Gabriele / Trigell, Emelie / Knutsson, Magnus et al. | SAE Technical Papers | 2022
    boundary layer mesh structure, and of the spatial resolution of the mesh, on the simulated acoustic signatures is investigated on detached eddy ...
    Schlagwörter: Computer simulation

    Gaussian Processes for Transfer Path Analysis Applied on Vehicle Body Vibration Problems

    Gurbuz, Caglar / Schmid, Johannes D. / Luegmair, Marinus et al. | SAE Technical Papers | 2022
    Transfer path analyses of vehicle bodies are widely considered as an important tool in the noise, vibration and harshness design process ...
    Schlagwörter: Simulation and modeling

    Assessing Low Frequency Flow Noise Based on an Experimentally Validated Modal Substructuring Strategy Featuring Non-Conforming Grids

    Gabriel, Christoph / Toth, Florian / Kaltenbacher, Manfred et al. | SAE Technical Papers | 2022
    interior acoustic comfort for passengers. Due to considerable psychological effects on stress and concentration, the low frequency contribution ...
    Schlagwörter: Psychiatry and psychology , Simulation and modeling

    Crisis management evaluation: formalisation & analysis of communication during fire incident in Amsterdam airport train tunnel

    Boersma, Kees / Passenier, David / Mollee, Julia | Tema Archiv | 2012
    tunnel was formalised, based on a public inquiry report, and subsequently, the emergency response to the incident was analysed by means of ...
    Schlagwörter: Simulation

    Exploring artificial vision for use in demanding ship operations

    Rekdalsbakken, Webjoern / Osen, Ottar L. | Tema Archiv | 2012
    Aalesund University College (AAUC) is situated in an area of industry companies developing the most advanced equipment and procedures for ...
    Schlagwörter: Simulation