1–20 von 1,503 Ergebnissen
|

    0W-16 Fuel Economy Gasoline Engine Oil Compatible with Low Speed Pre-Ignition Performance

    Liu, Hong / Li, Hongyu / Jin, Jiajia et al. | SAE Technical Papers | 2017
    It has been long established fact that fuel economy is a key driving force of low viscosity gasoline engine oil research and development ...
    Verlag: Society of Automotive Engineers , SAE International

    3D Numerical Study of Pressure Loss Characteristics and Filtration Efficiency through a Frontal Unplugged DPF

    Tennison, Paul / Ruona, William / Zhang, Xiaogang | SAE Technical Papers | 2010
    The main objective of this paper is to investigate the performance of partial filtration DPF substrates using 3-D Computational Fluid ...
    Verlag: Society of Automotive Engineers , SAE International

    3D Numerical Study of Pressure Loss Characteristics and Soot Leakage Through a Damaged DPF

    Tennison, Paul / Schram, Tim / Zhang, Xiaogang | SAE Technical Papers | 2009
    soot loading process, soot is collected inside a porous wall and eventually forms a soot cake layer on the surface of the DPF inlet channel ...
    Verlag: Society of Automotive Engineers , SAE International

    4 L Light Duty LPG Engine Evaluated for Heavy Duty Application

    Watson, Harry C. / Khan, Mohammad Ali | SAE Technical Papers | 2010
    Many applications of liquefied petroleum gas (LPG) to commercial vehicles have used their corresponding diesel engine counterparts for ...
    Verlag: Society of Automotive Engineers , SAE International

    100 Years of Corrosion Testing—Is It Time to Move beyond the ASTM D130? The Wire Corrosion and Conductive Deposit Tests

    Hunt, Gregory J. / Choo, Lindsey / Newcomb, Timothy | SAE Technical Papers | 2023
    The ASTM D130 was first issued in 1922 as a tentative standard for the detection of corrosive sulfur in gasoline. A ...
    Verlag: Society of Automotive Engineers , SAE International

    500 Hours Endurance Test on Biodiesel Running a Euro IV Engine

    Munack, Axel / Krahl, Juergen / Schroder, Olaf et al. | SAE Technical Papers | 2010
    eliminated by the oxidation catalyst as part of the PM-Kat®. The concentration of hydrocarbons was partially under background level and the emissions ...
    Verlag: Society of Automotive Engineers , SAE International

    1000-Hour Durability Evaluation of a Prototype 2007 Diesel Engine with Aftertreatment Using B20 Biodiesel Fuel

    Lyford-Pike, Edward J. / Khalek, Imad A. / Lucke, John E. et al. | SAE Technical Papers | 2009
    durability cycle for 1000 hours with B20 soy-based biodiesel blends and ultra-low sulfur diesel (ULSD) fuel to determine the impact of B20 on engine ...
    Verlag: Society of Automotive Engineers , SAE International

    2019-2020 Reviewers

    Yilmaz, Nadir | SAE Technical Papers | 2020
    The SAE International Journal of Fuels and Lubricants would like to thank and acknowledge the reviewers who have done ...
    Verlag: Society of Automotive Engineers , SAE International

    A carbon monoxide PROX reactor for PEM fuel cell automotive application

    Dudfield, C.D. / Chen, R. / Adcock, P.L. | Tema Archiv | 2001
    application. The reactor is based upon the catalyst coating of high surface area heat transfer technology. Catalyst screening studies have revealed a ...

    Accurate and efficient prediction of acoustical performance of noise barriers against transport noise pollution

    Peng, S.Z. / Sun, H.M. | Tema Archiv | 2009
    acoustical wave interaction for noise barriers, providing the dual benefit of preserving high numerical accuracy (boundary conditions have been ...

    A CFD Study of Fuel Evaporation and Related Thermo-fluid Dynamics in the Inlet Manifold, Port and Cylinder of the CFR Octane Engine

    Thiart, Anja / Meyer, Chris / Floweday, Gareth | SAE Technical Papers | 2012
    the compression ratio and hence the thermal efficiency of the engine. The latent heat of vaporization (LHV) of a fuel affects its knock ...
    Verlag: Society of Automotive Engineers , SAE International

    A Chemical and Morphological Study of Diesel Injector Nozzle Deposits - Insights into their Formation and Growth Mechanisms

    Britton, Ben / McGivery, Catriona / Giulliani, Finn et al. | SAE Technical Papers | 2017
    , refinement, cost and fuel efficiency requirements. This has included the implementation of high pressure common rail ...
    Verlag: Society of Automotive Engineers , SAE International

    Acidic Condensation in Low Pressure EGR Systems using Diesel and Biodiesel Fuels

    Pla, Benjamín / Bourgoin, Guillaume / Luján, José M. et al. | SAE Technical Papers | 2009
    Verlag: Society of Automotive Engineers , SAE International

    Acid Neutralization Rates—Why Total Base Number Doesn’t Tell the Whole Story: Understanding How the Colloidal Structure of Overbased Detergents Influences Acid Neutralization Rates

    Growney, David / Walker, Gary / Trickett, Kieran et al. | SAE Technical Papers | 2021
    Neutralization of acidic contaminants in engine lubricating oil is an important topic for engine manufacturers. Often, the deterioration in ...
    Verlag: Society of Automotive Engineers , SAE International

    Acid Neutralization Rates—Why Total Base Number Doesn’t Tell the Whole Story: Understanding the Neutralization of Organic Acid in Engine Oils

    McDowall, Daniel / Growney, David / Moscrop, Ellen et al. | SAE Technical Papers | 2021
    The acidification of lubricating oils during engine operation, and the subsequent additive neutralization, is an ...
    Verlag: Society of Automotive Engineers , SAE International

    A Comparative Analysis on Engine Performance of a Conventional Diesel Fuel and 10% Biodiesel Blends Produced from Coconut Oils

    Woo, Changhwan / Marquis, Christopher / Hawkes, Evatt et al. | SAE Technical Papers | 2015
    This paper presents engine performance and emissions of coconut oil-derived 10% biodiesel blends in petroleum diesel demonstrating ...
    Verlag: Society of Automotive Engineers , SAE International

    A Comparative Study of Directly Injected, Spark Ignition Engine Combustion and Energy Transfer with Natural Gas, Gasoline, and Charge Dilution

    Lacey, Joshua / Khosravi, Maziar / Brear, Michael et al. | SAE Technical Papers | 2022
    This article presents an investigation of energy transfer, flame propagation, and emissions formation mechanisms in a ...
    Verlag: Society of Automotive Engineers , SAE International

    A Comparative Study of Emission Characteristics of Propanol Isomers/Gasoline Blends Combined with EGR

    Tang, Chenglong / Cai, Jian / Gong, Jing | SAE Technical Papers | 2014
    , with the development of fermentation method, propanol isomers have gained more attention as engine additive to reduce the emission and the ...
    Verlag: Society of Automotive Engineers , SAE International

    A Comparative Study of Two Kinds of Biodiesels and Biodiesel-DEE Blends in a Common Rail Diesel Engine

    Zheng, Bin / Zhang, Ni / Wang, Xiangang et al. | SAE Technical Papers | 2011
    Ultrafine particles and NOx emissions of two kinds of biodiesels and their blends with diethyl ether (DEE) as an additive were compared ...
    Verlag: Society of Automotive Engineers , SAE International