1–11 von 11 Ergebnissen
|

    Coiled tubing and vessel motions for riserless coiled tubing systems

    Hoen, Christopher / Haheim, Svein A. | Tema Archiv | 2004
    , current and vessel motions. To avoid local buckling of the coiled tubing as it enters the subsea lubricator it is important to keep the vessel ...
    Schlagwörter: Coiled-Tubing-Bohrverfahren

    Development of a new spoolable mechanical coiled tubing connector

    Luft, H.B. / Laun, L.E. / Thov, P.B. | Tema Archiv | 2004
    Tube-to-tube joints in coiled tubing can be achieved by either fusion bonding or mechanical connections. A critical performance requirement ...
    Schlagwörter: Coiled-Tubing-Bohrverfahren

    Field Validation of a Coiled Tubing Fatigue Model

    Behenna, F.R. / Myrick, D.D. / Stanley, R.K. et al. | Tema Archiv | 2003
    Tracking the bending and internal pressure history of coiled tubing (CT) at the reel and guide arch, as it is run in and out of wells ...
    Schlagwörter: Coiled-Tubing-Bohrverfahren

    Flow Behavior of Fracturing Slurries in Coiled Tubing

    Goel, Naval / Shah, S.N. / Zhou, Y. | Tema Archiv | 2002
    Hydraulic fracturing through coiled tubing (CT) has become an effective and economical stimulation technique for wells with multiple zones ...

    Coiled Tubing Abrasion - An Experimental Study of Field Failures

    Larsen, Henrik Aslak / Reichert, Bruce A. | Tema Archiv | 2003
    Abrasion between the Coiled Tubing and the well completion has been a significant failure cause over the last three years. In excess of ...
    Schlagwörter: Coiled-Tubing-Bohrverfahren

    Coiled-Tubing-Conveyed Hydromechanical Pipe Cutting Enables Removable Packer Completions

    McGurk, Mark / Ponder, Andrew / Smith, Michael et al. | Tema Archiv | 2003
    removable packer completion and the coiled-tubing-conveyed hydromechanical pipe cutting system and describe in detail how the technology was proven ...
    Schlagwörter: Coiled-Tubing-Bohrverfahren

    New Empirical Friction Loss Correlation for Foam Fluids in Coiled Tubing

    Khade, Sudhakar D. / Shah, Subhash N. | Tema Archiv | 2002
    friction pressure losses and rheology, and friction loss correlation development for guar based foam fluids through coiled tubing. The present ...

    First Field Implementation of the Short-Trip Module: A Coiled Tubing Fatigue Reduction System

    Zhou, Wei / Cassee, Udo / Rolovic, Radovan | Tema Archiv | 2002
    Prudhoe Bay Alaska is a mature oilfield where coiled tubing (CT) drilled sidetracks are the preferred method for gaining access to small ...
    Schlagwörter: Coiled-Tubing-Bohrverfahren

    Flow Patterns and Minimum Suspension Velocity for Efficient Cuttings Transport in Horizontal and Deviated Wells in Coiled-Tubing Drilling

    Kelessidis, V.C. / Mpandelis, G.E. | Tema Archiv | 2003
    Coiled Tubing Drilling, grown significantly in recent years, is normally associated with high angle to horizontal and extended reach wells ...
    Schlagwörter: Coiled-Tubing-Bohrverfahren

    The Low Cycle Fatigue and Plastic Strain Response of Coiled Tubing in a Sour Environment with and without Corrosion Inhibitor Protection

    Luft, H.B. | Tema Archiv | 2003
    The post-yield material performance of 70 and 80 ksi yield strength carbon steel and high-strength corrosion resistant alloy (CRA) coiled ...
    Schlagwörter: Coiled-Tubing-Bohrverfahren

    Inflatable CT Conveyed Selective Well Testing System for Logging Openhole and Horizontal Wellbores: Development and Use

    Blount, C.G. / Crabtree, C.L. / Pierson, C.R. et al. | Tema Archiv | 2003
    resetting in wire/umbilical-free Coiled Tubing (CT), while constantly maintaining a production or injection path through the tool, called for ...
    Schlagwörter: Coiled-Tubing-Bohrverfahren