1–50 von 62 Ergebnissen
|

    Analysis and Design of an Optical Biosensor Using Mathematical Modeling

    Padukone, G. Sowmya / Devi, H. Uma / Shivaputra et al. | TIBKAT | 2021

    Performance Evaluation of Linear Solar Collector Using Hybrid Nanofluid

    Mohan, Sreejith / Joseph, Albin / Poovathinkal, Akash et al. | TIBKAT | 2021

    TLBO and JAYA: Insights into Novel Multi-objective Optimization Techniques

    Rajashekar, V. / Narayan, Yeole Shivraj | TIBKAT | 2021

    Challenges in the Design of Safe Handling System for Explosive Dust

    Kurakula, Nagababu / Muniyandy, Elangovan | TIBKAT | 2021

    Static Analysis of a C-Channel Robot Gripper Arm Using Finite Element Analysis

    Sakthimurugan, D. / Raj, L. Antony Michael / Raj, V. Antony Aroul et al. | TIBKAT | 2021

    Numerical Modeling and Analysis of a Multi-rotor UAS

    Vepa, K. S. / Sagar, N. V. S. S. / Esakki, Balasubramanian et al. | TIBKAT | 2021

    Development and Experimental Assessment of a Fluid Flow Monitoring System Using Flow Sensor and Arduino Interface

    Mulik, Sharad S. / Patange, Abhishek D. / Jegadeeshwaran, R. et al. | TIBKAT | 2021

    Design and Analysis of Aluminium Matrix Composite Aircraft Wing Structure

    Saleem, M. / Raj, Nishant Kumar / Gupta, Shreshth et al. | TIBKAT | 2021

    Wear Behavior of Duplex Stainless Steels Sintered and Forged Under Partial Vacuum Atmosphere

    Rajkumar, C. / Prakash, J. Udaya / Rubi, C. Sarala et al. | TIBKAT | 2021

    Numerical Study on Supersonic Co-flowing Jet with Varying Lip Thickness

    Shankar, R. Naren / Kumar, K. Sathish / Raja, N. Dilip et al. | TIBKAT | 2021

    NiP Composite Coating of Piston Ring by Plate and Bumper Method

    Malathi, M. / Mabel, J. Herbert / Rajendran, R. | TIBKAT | 2021

    Influence of Seam Threading of a Cricket Ball on Its Trajectory

    Vepa, K. S. / Sagar, N. V. S. S. | TIBKAT | 2021

    Numerical Investigation on Optimized Convergent Divergent Nozzle in 3S Separator Device

    Prabhu, L. / Jadediya, N. Kiran / Ramana, P. Gangadhar Venkata et al. | TIBKAT | 2021

    A Route Planning Strategy for Commercial Deliveries Using Drones

    Manna, Soumen / Narasimhamurthy, Anand | TIBKAT | 2021

    Investigation on Mechanical Properties of AA6082-AA7075 Friction Stir Welded Dissimilar Aluminum Alloys

    Giridharan, K. / Chakravarthi, G. / Karthick, S. et al. | TIBKAT | 2021

    Multistage Mass Optimization of a Quadcopter Frame

    Sagar, N. V. S. S. / Esakki, Balasubramanian / Udayagiri, Chandrasekhar et al. | TIBKAT | 2021

    Design and Development of a Cost-Effective Reloadable Motor for Sounding Rocket

    Ravikiran / Shariff, Mohd. Jawad / Kaushil, H. et al. | TIBKAT | 2021

    Lab VIEW and PID Action-Based Brake Lever Effect for Validation of Servo Vacuum Booster

    Priyadharson, A. Selwin Mich / Joshua, S. Vinson | TIBKAT | 2021

    Synthesis and Characterization of 17 Cr Ferritic ODS Steel Developed Through Vacuum Hot Pressing

    Dharmalingam, G. / Prabhukumar, Sellamuthu / Prasad, M. Arun | TIBKAT | 2021

    Microstructural and Mechanical Characterization of Sintered and Hot Pressed Hybrid Metal Matrix Composites

    Sundaram, Jayavelu / Prakash, J. Udaya / Ramajayam, Mariappan | TIBKAT | 2021

    Numerical Study on Sonic Underexpanded Co-flowing Jet with Varying Separation Distance

    Shankar, R. Naren / Kumar, K. Sathish / Raja, N. Dilip et al. | TIBKAT | 2021

    Review of Polydimethylsiloxane (PDMS) as a Material for Additive Manufacturing

    Alkhalaf, Qusai / Pande, Sarang / Palkar, Ritesh Ramesh | TIBKAT | 2021

    Wear Properties on AA2014/Al2O3/TiB2 Hybrid Metal Matrix Composites

    Sundaram, Jayavelu / Prakash, J. Udaya / Kagitha, Harivind | TIBKAT | 2021

    Effect of Number of Inlet Tangential Ports and Their Angle on Spray Characteristics of Plug Type Swirl Injector

    Mahottamananda, Sri Nithya / Babu, D. N. Dilli / Kadiresh, P. N. | TIBKAT | 2021

    Innovative design, analysis and development practices in aerospace and automotive engineering : proceedings of I-DAD 2020

    International Conference on Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering | TIBKAT | 2021

    Rarefied Flow Field Analysis on a Re-entry Vehicle

    Abhay, M. / Kumar, Vinod / Chaphalkar, Aaditya et al. | TIBKAT | 2021

    A Contemporary Review on Knee Injuries and Protective Pads

    Anirudh, K. / Yeole, Shivraj Narayan | TIBKAT | 2021

    CFD Analysis on Extrusion of Slurry in Direct Ink Writing

    Balasubramanian, E. / Kumar, Yogesh / Raj, Nishant Kumar et al. | TIBKAT | 2021

    An Innovative Method of Preventing Bolt Hole Crack in Aluminium Wheels by Using Laser Peening Technique

    Sundararajan, T. / Muthuraj, R. / Srinivas, R. et al. | TIBKAT | 2021

    Study of Vehicle Pulling Phenomenon and Various Factors that Influence Vehicle Pull

    Shubham, Kale / Pramod, Patil / Ankur, Sharma et al. | TIBKAT | 2021

    Thermal Distribution on Gas Turbine Blade Using Thermal Paint

    Rupesh, P. L. / Arulprakasajothi | TIBKAT | 2021

    Experimental Investigation on Geometric Error in Single-Point Incremental Forming with Dummy Sheet

    Sisodia, Vikas / Kumar, Shailendra / Jagtap, Rahul et al. | TIBKAT | 2021

    3D Digitizing Practice-Advantage in Reverse Engineering with Accuracy Boost

    Renald, C. J. Thomas / Yuvaraj, S. / Rathnaraj, J. David | TIBKAT | 2021

    A Novel Methodology of Enhancing Vehicle Safety Using a Safety Valve for Vehicle Wheels

    Sundararajan, T. / Muthuraj, R. / Hariharan, P. et al. | TIBKAT | 2021

    Development of DLP-Based Stereolithography System

    Suryatal, Baban / Deshmukh, Suhas / Sarawade, Sunil | TIBKAT | 2021

    Computation of Drag of a Ballistic Reentry Body at Various Mach Numbers

    Balasubramanian, S. / Vidya, G. / Joshi, Ganapati | TIBKAT | 2021