1–20 von 25 Ergebnissen
|

    Chemical depth profiling of multi-layer automotive coating systems

    Adamsons, K. | Tema Archiv | 2002
    Detailed chemical analysis of high performance automotive coating systems can be done with a relatively available and affordable set of ...

    Analysis of wear debris in rolling contact fatigue cracks of pearlitic railway wheels

    Cvetkovski, K. / Ahlström, J. / Norell, M. et al. | Tema Archiv | 2014
    concentration of oxygen was measured in between flakes, indicating the presence of oxides and flakes being of similar chemical composition as the base ...

    High performance modeling of atmospheric re-entry vehicles

    Martin, Alexandre / Scalabrin, Leonardo C. / Boyd, Iain D. | Tema Archiv | 2012
    of chemical species are involved. The CFD result demonstrates the need for such chemistry model when modeling the flow field around an ...

    Characterization of Deposits Collected from Plugged Fuel Filters

    Erlandsson, Anders Christiansen / Csontos, Botond / Bernemyr, Hanna et al. | SAE Technical Papers | 2019
    filters as well. To better understand the process of filtration, awareness of the different possible contaminants from the field is needed. This ...
    Verlag: Society of Automotive Engineers , SAE International

    Model-based design of an automotive-scale, metal hydride hydrogen storage system

    Johnson, Terry A. / Kanouff, Michael P. / Dedrick, Daniel E. et al. | Tema Archiv | 2012
    -dimensional models of coupled fluid dynamics and heat transfer. Chemical kinetics models were coupled with both heat and mass transfer calculations to ...

    Sulfur Poisoning of a Cu-SSZ-13 SCR Catalyst under Simulated Diesel Engine Operating Conditions

    Su, Changsheng / Ottinger, Nathan / Xi, Yuanzhou et al. | SAE Technical Papers | 2021
    (SCR) due to their high conversion efficiency and excellent hydrothermal stability. Diesel engine exhaust contains small amounts of SOx due to ...
    Verlag: Society of Automotive Engineers , SAE International

    The effects of weathering on the mechanical performance of automotive paint systems

    Nichols, M.E. / Gerlock, J.L. / Smith, C.A. et al. | Tema Archiv | 1999
    advances in assessing the durability of coatings by measuring weathering-induced chemical composition changes have greatly increased our ability to ...

    On-board and off-board performance of hydrogen storage options for light-duty vehicles

    Ahluwalia, R.K. / Hua, T.Q. / Peng, J.K. | Tema Archiv | 2012
    hydrolysis of sodium borohydride presents difficult chemical, thermal and water management issues, and regenerating NaBH4 by converting B ...

    A new rotary tribometer to study the wear of reinforced rubber materials

    Mane, Z. / Loubet, J.L. / Guerret, C. et al. | Tema Archiv | 2013
    A rotary tribometer has been developed in order to reproduce abrasion wear at the interface between the reinforced rubber material of a ...

    Airbag for the closing of pipelines on explosions and leakages

    Eisenreich, N. / Neutz, J. / Seiler, F. et al. | Tema Archiv | 2007
    , capable of withstanding up to 10 bar pressure. The choice of material was critical to ensure sufficient strength and chemical resistance while ...

    Fitness for service of welded components under creep and creepfatigue loading

    Dogan, Bilal | Tema Archiv | 2010
    generation and chemical processing industrial applications since couple of decades. ...

    Experimental analysis and wear modeling for mechanical components of a typical rail launcher

    Akkök, Metin / Acar, Bülent / Acmaz, Emre | Tema Archiv | 2013
    One of the most important design considerations for rocket launchers is its maintainability and one of the most important parameter which ...

    The space exposure experiment of PEEK sheets under tensile stress

    Nakamura, Takashi / Nakamura, Hiroshi / Fujita, Osamu et al. | Tema Archiv | 2004
    observed on surface morph, mass, chemical structure, and tensile properties of the test pieces after EB exposure regardless of tensile stress. ...

    Application of microwave spectroscopy for the detection of water fraction and water salinity in water/oil/gas pipe flow

    Bo, O.L. / Nyfors, E. | Tema Archiv | 2002
    Multiphase meters (MPMs) are used by the petroleum industry for measurement of individual flowrates of water, gas and oil flowing through a ...

    Superiority and failure mode of automotive batteries insulated with polyethylene separators

    Kung, J. | Tema Archiv | 1994
    industries in these regions have demonstrated the superiority of PE separators with respect to other types in terms of physical, electrical and ...

    An improved method for applying the Lockhart-Martinelli correlation to three-phase gas-llquid-solid horizontal pipeline flows

    Rahman, M.A. / Adane, K. Freeman / Sanders, R. Sean | Tema Archiv | 2013
    Three-phase (C/L/S) horizontal pipe flow data collected from the literature are used to evaluate the performance of a number of ...

    Wear effects and mechanisms of soot-contaminated automotive lubricants

    Green, D.A. / Lewis, R. / Dwyer-Joyce, R.S. | Tema Archiv | 2006
    engine valve train contact. Previous research on this topic has been mainly performed from a chemical point of view in fundamental studies, with ...

    Potential use of transport and dispersion model output to supplement allied tactical publication-45 hazard area prediction templates

    Platt, Nathan / Jones, Leo | Tema Archiv | 2012
    Allied Tactical Publication-45(C) is the current US and NATO command doctrine for Nuclear, Chemical and Biological (NBC) events. ATP-45 is ...

    Amine type inhibitor effect on corrosion-erosion wear in oil gas pipes

    Martinez, D. / Gonzalez, R. / Montemayor, K. et al. | Tema Archiv | 2009
    . Combined parameters like fluid flow regime and chemical composition of the wall deposited products increase oil gas pipes wearing. Corrosion ...

    Corrosive wear failure analysis in a natural gas pipeline

    Hernandez-Rodriguez, M.A.L. / Martinez-Delgado, D. / Gonzalez, R. et al. | Tema Archiv | 2007
    extraction plant. A T-shape section of this line, failed by perforation under unknown circumstances. Chemical and mechanical characterization of the ...