1–20 von 29 Ergebnissen
|

    Design of power split transmission: Design of dual mode power split transmission

    Kim, J. / Kang, J. / Kim, Y. et al. | British Library Online Contents | 2010

      Design of power split transmission: Design of dual mode power split transmission

      Kim, J. / Kang, J. / Kim, Y. et al. | Online Contents | 2010
      , the equation for the MP was derived for the gear ratios of a general 4-node lever model. The MP characteristics for the transmission ratio (TR ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Cooperative control of the motor and the electric booster brake to improve the stability of an in-wheel electric vehicle

    Ko, S. / Song, C. / Kim, H. | Online Contents | 2016
    Abstract A cooperative control algorithm for an in-wheel motor and an electric booster brake is proposed to improve the stability of an in ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Effect of UWS injection at low exhaust gas temperature on NOx removal efficiency of diesel engine

    Han, J. / Lee, J. / Oh, Y. et al. | British Library Online Contents | 2017

    Reduction of emissions with propane addition to a diesel engine

    Lee, J. / Choi, S. / Kim, H. et al. | British Library Online Contents | 2013

      Reduction of emissions with propane addition to a diesel engine

      Lee, J. / Choi, S. / Kim, H. et al. | Online Contents | 2013
      categories. In the first category are studies focused on the addition of small amounts of gaseous fuel to CI engines. In these studies, gaseous fuel ...

    System architecture of HALAS—a helicopter slung load stabilisation and positioning system

    Nonnenmacher, D. / Kim, H. / Götz, J. et al. | Online Contents | 2013
    operations. This means compensation of additional roll, pitch and yaw moments created by a significant distance of the load suspension point to the ...

    Development of estimation algorithms for vehicle’s mass and road grade

    Kim, I. / Kim, H. / Bang, J. et al. | Online Contents | 2013
    Abstract In controlling the longitudinal motion of electrified vehicles such as hybrid vehicles and PHEV (Plug-in Hybrid Electric Vehicles ...

      Development of estimation algorithms for vehicle’s mass and road grade

      Kim, I. / Kim, H. / Bang, J. et al. | British Library Online Contents | 2013

    Properties of roadway particles from interaction between the tire and road pavement

    Lee, S. / Kwak, J. / Kim, H. et al. | British Library Online Contents | 2013

      Properties of roadway particles from interaction between the tire and road pavement

      Lee, S. / Kwak, J. / Kim, H. et al. | Online Contents | 2013
      Abstract A large fraction of urban $ PM_{10} $ concentrations is due to non-exhaust traffic emissions, including road dust, particles from ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    CVT ratio control with consideration of CVT system loss

    Ryu, W. / Kim, H. | Online Contents | 2008
    occupies most of the drivetrain loss, depends on the engine speed, input torque, primary and secondary actuator pressure, a modified CVT ratio map ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

      CVT ratio control with consideration of CVT system loss

      Ryu, W. / Kim, H. | British Library Online Contents | 2008

    Motor control algorithm for an optimal engine operation of power split hybrid electric vehicle

    Hong, S. / Kim, H. / Kim, J. | Online Contents | 2015
    torque control algorithm of a power split HEV is investigated for optimal engine operation. The control algorithm is designed in such a way that ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

      Motor control algorithm for an optimal engine operation of power split hybrid electric vehicle

      Hong, S. / Kim, H. / Kim, J. | British Library Online Contents | 2015

    Fatigue life prediction of a rubber material based on dynamic crack growth considering shear effect

    Kim, H. J. / Song, M. W. / Moon, H. I. et al. | Online Contents | 2014
    analysis, deformation mode of an element was classified into tension and shear, and a weighting factor was multiplied to a strain energy density ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

      Fatigue life prediction of a rubber material based on dynamic crack growth considering shear effect

      Kim, H. J. / Song, M. W. / Moon, H. I. et al. | British Library Online Contents | 2014

    Motor control of input-split hybrid electric vehicles

    Kim, J. / Kim, N. / Hwang, S. et al. | British Library Online Contents | 2009

    Performance analysis of a CVT clutch system for a hybrid electric vehicle

    Ryu, W. / Cho, N. / Yoo, I. et al. | Online Contents | 2009
    Abstract In this study, the performance of a CVT clutch system for a hybrid electric vehicle was investigated. To analyzed the vehicle ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

      Performance analysis of a CVT clutch system for a hybrid electric vehicle

      Ryu, W. / Cho, N. / Yoo, I. et al. | British Library Online Contents | 2009

    Experimental study on the characteristics of nano-particle emissions from a heavy-duty diesel engine using a urea-SCR system

    Lee, S. / Cho, Y. / Song, M. et al. | British Library Online Contents | 2012

      Experimental study on the characteristics of nano-particle emissions from a heavy-duty diesel engine using a urea-SCR system

      Lee, S. / Cho, Y. / Song, M. et al. | Online Contents | 2012
      diseases such as lung cancer. Because diesel nano-particle issues are of global concern, regulations on particulate matter emissions specify that ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Development of a control strategy based on the transmission efficiency with mechanical loss for a dual mode power split-type hybrid electric vehicle

    Kang, J. / Choi, W. / Kim, H. | Online Contents | 2012
    powertrain efficiency. To evaluate the transmission characteristics of the dual mode power split transmission (PST), a mechanical loss model of the ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Design of a Multi-Chamber Silencer for Turbocharger Noise

    Selamet, A. / Kim, H. / Lee, I. J. et al. | SAE Technical Papers | 2009
    A multi-chamber silencer is designed by a computational approach to suppress the turbocharger whoosh noise downstream of a compressor in an ...
    Verlag: Society of Automotive Engineers , SAE International

    Fatigue design for plug/ring type gas welded joints of sts301l including welding residual stresses

    Baek, S. Y. / Bae, D. H. / Kim, H. | British Library Online Contents | 2008

      Fatigue design for plug/ring type gas welded joints of sts301l including welding residual stresses

      Baek, S. Y. / Bae, D. H. / Kim, H. | Online Contents | 2008
      stresses of the gas welds were then compared to experimental results measured using a hole drilling method. In order to evaluate the fatigue ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Development of evolutionary cone type LSD for SUV/RV utilizing the axiomatic approach and the ultrasonic nano crystal surface modification technology

    Pyoun, Y. S. / Kim, H. T. / Lee, Y. C. et al. | British Library Online Contents | 2008

      Development of evolutionary cone type LSD for SUV/RV utilizing the axiomatic approach and the ultrasonic nano crystal surface modification technology

      Pyoun, Y. S. / Kim, H. T. / Lee, Y. C. et al. | Online Contents | 2008
      Abstract Surface topology, cone angle and the forces acting on the cone of the clutch type limited slip differential (LSD) are major design ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Active yaw control for handling performance improvement by using traction force

    Kim, H. / Lee, S. / Hedrick, J. K. | Online Contents | 2015
    Abstract This paper presents the vehicle handling performance improvement by means of transfer case and torque vectoring system. The focus ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

      Active yaw control for handling performance improvement by using traction force

      Kim, H. / Lee, S. / Hedrick, J. K. | British Library Online Contents | 2015

    Hydraulic control system design for a PHEV considering motor thermal management

    Choi, J. / Bae, K. / Wi, J. et al. | British Library Online Contents | 2018

    A comparative study on the power characteristics and control strategies for plug-in hybrid electric vehicles

    Ma, C. / Kang, J. / Choi, W. et al. | British Library Online Contents | 2012

      A comparative study on the power characteristics and control strategies for plug-in hybrid electric vehicles

      Ma, C. / Kang, J. / Choi, W. et al. | Online Contents | 2012
      Abstract A comparative study was performed on two types of plug-in hybrid electric vehicles (PHEVs): the GM Volt and the Toyota Prius Plug ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul