1–20 von 586 Ergebnissen
|

    Accelerated aging versus realistic aging in aerospace composite materials. I. The chemistry of thermal aging in a low-temperature-cure epoxy composite

    Dao, B. / Hodgkin, J. / Krstina, J. et al. | Tema Archiv | 2006
    , 120 C, 170 C, and 200 C (in air) and the changes to the chemical and physicochemical structure of the composite are analyzed by a range of ...

    Accounting for laminar run and trip drag in supersonic cruise performance testing

    Goodsell, Aga M. / Kennelly, Robert A. jun. | Tema Archiv | 2004
    visualization using a subliming chemical revealed that the boundary-layer trip was not consistently effective. Flow over a portion of the upper wing ...

    A chemically informed, control-oriented model of a three-way catalytic converter

    Soumelldis, M.I. / Stobart, R.K. / Jackson, R.A. | Tema Archiv | 2007
    Chemical activity inside a three-way catalytic converter (TWC) is highly complex and usually is not taken into account when developing TWC ...

    A comparison of tailpipe, dilution tunnel, and wind tunnel data in measuring motor vehicle PM

    Maricq, M.M. / Chase, R.E. / Xu, N. | Tema Archiv | 2001
    Comparison between particle size distributions recorded directly at the tailpipes of both diesel and gasoline vehicles and measurements ...

    A decontamination system for chemical weapons agents using a liquid solution on a solid sorbent

    Waysbort, Daniel / McGarvey, David J. / Creasy, William R. et al. | Tema Archiv | 2009
    A decontamination system for chemical warfare agents was developed and tested that combines a liquid decontamination reagent solution with ...

    Advanced reactor concept for complex hydrides: Hydrogen desorption at fuel cell relevant boundary conditions

    Bürger, I. / Luetto, C. / Linder, M. | Tema Archiv | 2014
    capacities. As hydrogen is bonded by a chemical reaction to the solid state storage material, it is just released when heat is provided. In an ...

    Advanced treatment of recalcitrant textile wastewater and goal-oriented process design

    Han, Dukgyu / Kim, Moonil / Bae, Wookeun | Springer Verlag | 2013
    Abstract This study was intended to evaluate the performance of a biological and a chemical treatment process ...

    A fundamental tribochemical study of the third body layer formed during automotive friction braking

    Wirth, A. / Eggleston, D. / Whitaker, R. | Tema Archiv | 1994
    The chemical nature of the transfer film (TF) or third body layer (TBL) formed at the friction interface during automotive friction braking ...

    A gas handling system for MOMBE growth

    Hersee, S.D. / Ballingall, J.M. | Tema Archiv | 1990
    Describes the operating principles and performance of a gas handling system, which was designed specifically for the metalorganic molecular ...

    Ageing in modified bitumen using FTIR spectroscopy

    Nivitha, M.R | Online Contents | 2016
    the evolution of the chemical functionalities during ageing were tracked using FTIR spectroscopy. Analysis of the spectra of modified binders ...

    Aging effect on thermal, mechanical and tribological behaviour of polymeric coatings used for pipeline application

    Guermazi, N. / Elleuch, K. / Ayedi, H.F. et al. | Tema Archiv | 2008
    physico-chemical, mechanical and tribological properties of this coating was undertaken. Firstly, sorption kinetic was studied through water ...

    A hard X-ray photoelectron spectroscopy study on the solid electrolyte interphase of a lithium 4,5-dicyano-2- (trifluoromethyl)imidazolide based electrolyte for Si-electrodes

    Lindgren, Fredrik | Online Contents | 2016
    (HAXPES) at two different photon energies. This enables a depth resolved picture of the reaction processes and gives an idea of the chemical ...

    Airbag for the closing of pipelines on explosions and leakages

    Eisenreich, N. / Neutz, J. / Seiler, F. et al. | Tema Archiv | 2007
    , capable of withstanding up to 10 bar pressure. The choice of material was critical to ensure sufficient strength and chemical resistance while ...

    Aluminothermic preparation of Hf-Ta and Nb-10Hf-1Ti alloys and their characterization

    Sharma, I.G. / Majumdar, S. / Chakraborty, S.P. et al. | Tema Archiv | 2003
    -reduction of the oxides of individual components. In the adopted process the heat generated from the chemical reactions, serves the function of ...

    Ambient cure high solids acrylic resins for automotive refinish clear coat applications

    Petit, H. / Henry, N. / Krebs, A. et al. | Tema Archiv | 2001
    fast at ambient temperature in order to reduce the investment in drying equipment and the time of repair. However, matching the stringent ...

    Amine type inhibitor effect on corrosion-erosion wear in oil gas pipes

    Martinez, D. / Gonzalez, R. / Montemayor, K. et al. | Tema Archiv | 2009
    . Combined parameters like fluid flow regime and chemical composition of the wall deposited products increase oil gas pipes wearing. Corrosion ...

    A modern analytical toolbox: defect (W&D) studies of automotive coating systems, including depth profiling studies

    Adamsons, Karlis | Tema Archiv | 2012
    Chemical and microscopy measurement technologies have proven to be very powerful in our failure analysis efforts to detail composition and ...