1–20 von 2,095 Ergebnissen
|

    Zur statischen und dynamischen Berechnung von Pipelines und Risern im Meer

    Rosemeier, G. | Tema Archiv | 1995
    In der Offshoretechnologie werden die verformungsweichen, seilartigen, biegesteifen Konstruktionselemente Pipeline und Riser eine ...
    Schlagwörter: Leitrohr (Meerestechnik)

    Zum Tragfähigkeitsnachweis für horizontal belastete Pfähle für die Grenzzustände GEO-2 und GEO-3

    Achmus, Martin | Tema Archiv | 2012
    Horizontal belastete Pfähle kommen häufig in der Offshore-Technik zum Einsatz, in jüngerer Zeit insbesondere als Gründungselemente für ...

    Zinc metal free primer

    Wilds, Neil | Tema Archiv | 2008
    it would not be a true result as, in essence, this method/technique is quite harsh and it will never represent what occurs in practice - the ...
    Schlagwörter: Meerestechnik

    Z-drive escort tug operating modes

    Jukola, H. | Tema Archiv | 1995
    , and increasingly in North America. In the United States, this is the result of the enactment of well-meaning laws to improve the safety of ...

    YUNUS underwater acoustic data acquisition system

    Saatclar, Ruhi / Ergintav, Semih / Basaran, Hakan | Tema Archiv | 2005
    Research Group and the Earth and Marine Sciences Research Institute of TUBITAK Marmara Research Center. The new system has been developed for ...
    Schlagwörter: Meerestechnik

    Yield strength 400 MPa heavy steel plate for Arctic offshore structures

    Amano, K. / Kawabata, F. / Kudo, J. et al. | Tema Archiv | 1989
    with K-groove and a heat input of 5.0 kJ/mm is as high as 0.4 mm in CTOD at -50 Cel. Furthermore the each side one pass submerged arc welded ...
    Schlagwörter: MEERESTECHNIK

    World's first subsea separation and injection plant destined for Troll C

    Knott, D. | Tema Archiv | 1997
    Zukünftig können bei der Gas- und Ölproduktion Anlagenausrüstungen eingesetzt werden, die in großer Meerestiefe weit entfernt von der ...
    Schlagwörter: Plattform (Meerestechnik)

    Wind turbine on floating platforms for electricity services in marinas (WIFEMA)

    Cesari, F.G. / Gaudiosi, G. | Tema Archiv | 2000
    site and connected to the electric grid (if the case) after mooring in free waters with a catenary chain or to a sea bed fixed pile or to a ...

    Wind-tunnel pressure measurements on model-scale rigid downwind sails

    Bot, Patrick / Viola, Ignazio Maria / Flay, Richard G.J. et al. | Tema Archiv | 2014
    This paper describes an experiment that was carried out in the Twisted Flow Wind Tunnel at The University of Auckland to measure a detailed ...

    Wind tunnel experiments on a fully appended laminar flow submersible for oceanographic survey

    Huggins, A. / Packwood, A.R. | Tema Archiv | 1995
    the remaining 30 % of the body. Hydrodynamic forces were measured, and a significant reduction in drag was found compared with standard ...

    Wind and wave induced behaviour of offshore guyed tower platforms

    Bisht, R.S. / Jain, A.K. | Tema Archiv | 1998
    against lateral movement from its mooring system. In this study, the response of offshore guyed towers to random forces generated by wind and wave ...

    Wide range of systems aids marginal deepwater development

    Schultz, A.R. / Brown, R.J. | Tema Archiv | 1981
    Intensive Forschungs- und Entwicklungsarbeiten der Anlagenbauer ermoeglichen die Erschliessung auch kleinerer Oelfelder in immer groesseren ...
    Schlagwörter: MEERESTECHNIK

    Wide range of parameters on offshore site is critical to offshore pipeline design

    Jinsi, B.K. | Tema Archiv | 1982
    Wartungstechnik besprochen. Behandelt werden die Betriebsbedingungen, Stahlsorten, Sicherheitszuschlaege, Besonderheiten bei der Verlegung in tiefen und ...
    Schlagwörter: MEERESTECHNIK

    Why aren't high strength steels used more widely in marine structures? Is it because of problems caused by fatigue, corrosion fatigue, weldability, or others?

    Harrison, J.D. | Tema Archiv | 1989
    the use of high strength steels in marine structures. In fact the use of such steels is significant and increasing. Factors considered are ...
    Schlagwörter: MEERESTECHNIK , STAND DER TECHNIK

    W.H. Allen Sons and Company Limited, Bedford, England

    Tema Archiv | 1976
    zwischen 400 und 4000 PS entwickelt hat. Einzelheiten ueber das heutige Bauprogramm, technische Daten wichtiger Baureihen, die heute in den ...
    Schlagwörter: MEERESTECHNIK

    Wells turbine with end plates for wave energy conversion

    Takao, Manabu / Setoguchi, Toshiaki / Kinoue, Yoichi et al. | Tema Archiv | 2007
    In order to improve the performance of the Wells turbine for wave energy conversion, the effect of end plate on the turbine characteristics ...

    Welding for the deep sea

    Tema Archiv | 1976
    Berichtet wird ueber die Fertigung von U-Booten fuer die Meerestechnik mit einer maximalen Tauchtiefe von 900 m. Die Boote werden in einer ...

    Wave transformation through flushing culverts operating at seawater level in coastal structures

    Tsoukala, V.K. / Katsardi, V. / Belibassakis, K.A. | Tema Archiv | 2014
    The placement of flushing culverts in breakwaters is a simple way to counteract a decline in water quality in harbour basins. A series of ...

    Wave resistance of a hovercraft moving in water with nonrigid bottom

    Cohen, M. / Miloh, T. / Zilman, G. | Tema Archiv | 2001
    inviscid upper layer (water) and a viscous layer (nonrigid bottom).Numerical calculations show that the maximum wave resistance in the vicinity of ...

    Wave propagation through arrays of unevenly spaced vertical piles

    Duclos, G. / Clement, A.H. | Tema Archiv | 2004
    investigated in the recent past, but most of the time under the assumption of regular and spatially periodic arrangements. Unlike these authors, we ...