1–20 von 2,309 Ergebnissen
|

    Ground Testing of the 16th Materials International Space Station Experiment Materials

    Plis, Elena A. / Bengtson, Miles T. / Engelhart, Daniel P. et al. | AIAA | 2023
    and atomic oxygen (AO) of heritage and novel spacecraft material selection. The studied materials represent the “flight duplicates” of samples ...
    Verlag: The American Institute of Aeronautics and Astronautics
    Schlagwörter: Space Science and Technology , Material Properties , International Space Station

    Self-Adjusting Cutting Parameter Technique for Drilling Multi-Stacked Material

    K'nevez, Jean-Yves / Jallageas, Jeremy / Ayfre, Matthieu et al. | SAE Technical Papers | 2015
    This study investigates the self-adjusted cutting parameter technique to improve the drilling of multi-stacked material. The technique ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Composite materials , Tools and equipment

    Research progress of helicopter noise suppression technology based on materials/structures

    Freier Zugriff
    LI Wenzhi / CAO Yaoqin / HE Zhiping | DOAJ | 2022
    international scope was reviewed. The noise control characteristics and effects of conventional sound absorbing materials, intelligent piezoelectric ...
    Verlag: Journal of Aeronautical Materials
    Schlagwörter: material , development status and trend

    Experimental Study of Sliding Wear Behavior of the Casted Lead Bronze Journal Bearing Material

    Chaudhary, Rajiv / Singh, Ramesh Chandra / Sharma, Vipin Kumar | SAE Technical Papers | 2019
    Lead (Pb) bronze material is used for the manufacturing of bearings. Lead provides less friction and wear-related properties to bronze ...
    Verlag: Society of Automotive Engineers , SAE International

    Design for Six Sigma: Material Design for 3D Printing of the New Product

    Lengyelova, Kristina / Alberdi, Jone | IEEE | 2022
    ) material and recycled PLA using Fused Filament Fabrication (FFM) technology, thus significantly helping especially during the Covid-19 pandemic ...

    Potential Applicability of Impact Echo Method on Pavement Base Materials as a Nondestructive Testing Technique

    Mahedi, Masrur / Hossain, Sahadat / Faysal, Mohammad et al. | Transportation Research Record | 2019
    materials are relatively weak and have to be stabilized with cement or other stabilizers. However, because of product variability and lack of ...

    Modelling Radioactive Materials Tracking in Sea Transportation by RFID Technology

    Freier Zugriff
    Sanja Bauk | DOAJ | 2020
    RFID readers have provided a safe and easy way of using this technology. A variety of sensors, such as seal, temperature, humidity, shock ...
    Schlagwörter: radioactive materials tracking , modelling radioactive materials tracking , radioactive materials , radio frequency and identification (rfid) , rfid technology , Canals and inland navigation. Waterways , Transportation and communications

    New structural materials for space applications

    Eaton, D.C.G. / Pradier, A. / Lambert, M. | Tema Archiv | 1991
    Die Arbeit gibt einen Überblick über Werkstoffe für die Weltraumtechnik. Es werden im wesentlichen Verbundwerkstoffe eingesetzt. Für den ...
    Schlagwörter: WERKSTOFF , HOCHFESTER WERKSTOFF

    Analyzing Customer Preference to Product Optional Features in Supporting Product Configuration

    Wang, Mingxian / Saeger, Veronica / Chen, Wei et al. | SAE Technical Papers | 2017
    impact of product features and feature combinations on customers’ purchasing behaviors. Existing literature has been traditionally focused on ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Moving Technology from Test Tube to Commercial Product: A Case Study of Three Inventions

    Bryant, Robert G. | Bentham Science Publishers | 2014
    , Imitec Inc.), the Thin Layer Unimorph Driver (THUNDER, FACE International), and the Macrofiber Composite (MFC, Smart Material Corp.) will be ...
    Schlagwörter: Materials

    Robust Design of Spiral Groove Journal Bearing

    Kalmegh, Amit / Golecha, Kailash / Sarkar, Subrata et al. | SAE Technical Papers | 2016
    bearing, which is insensitive to noises at each stage of the product life cycle. Parameter design and tolerance design for journal bearing have ...
    Verlag: Society of Automotive Engineers , SAE International

    Fuel Cell Electric Vehicles: A Platinum and Other Raw Material Perspective Based on Vehicle Design and Technology Data

    Schmuelling, Benedikt / Mas-Peiro, Jordi / Pou, Josep O. et al. | SAE Technical Papers | 2021
    temporarily critical during FCEV ramp-up regardless of what design and technology are being implemented. Closed-loop ...
    Verlag: Society of Automotive Engineers , SAE International

    Material Recognition Technology of Internal Loose Particles in Sealed Electronic Components Based on Random Forest

    Jiang, Aiping / Wang, Guotao / Yan, Huizhen et al. | SAE Technical Papers | 2023
    greatly increases the risk of aerospace equipment. Traditional material recognition technology has a low recognition ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Materials identification

    Technology Development of Laser Marking to Improve the Traceability of Brake Friction Materials

    Gellert, Bruno / Bottós, Gabriel / Bottós, Rafael et al. | SAE Technical Papers | 2010
    marketing, control and traceability of the friction materials industry. ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Composite materials , Research and development

    Overview of the RIFF Technique: Source Identification, Defect Detection and in-situ Material Properties Measurement by Verification of the Local Motion Equation

    Pezerat, Charles | SAE Technical Papers | 2016
    presented. Examples showing the possibility to characterize composite materials in medium and high frequency ranges and to realize maps of material ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Composite materials

    Dependence Between the Mechanical Characteristics of the Material and the FDM Sample Made From This Material

    Raspopina, Vera / Perelygina, Alexandra / Shemetov, Lev et al. | Springer Verlag | 2021
    mechanical characteristics of the product and the filament material with which the product is manufactured. For this, the samples were tested for ...
    Verlag: Springer International Publishing , Cham
    Schlagwörter: Material tensile diagram , Aerospace Technology and Astronautics , Transportation Technology and Traffic Engineering

    PRORA USV Technology Program - Novel Materials and Related Technology to Enable Future Space Transportation

    Scatteia, L. / Cantoni, S. / Marino, G. et al. | British Library Conference Proceedings | 2004
    Verlag: Japan Society for Aeronautical and Space Science , Tokyo
    Schlagwörter: Space technology

    The Evolution of Material Conditioning to a Technology

    Zaber, Robert | SAE Technical Papers | 1990
    adhesives applied by automation, which results in uniform product quality, scrap reduction, and material costs savings. Several processing pitfalls ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Adhesives and sealants