Synonyme wurden verwendet für: SAE congress exhibition
Suche ohne Synonyme: title: SAE 2012 world congress and exhibition

1–20 von 45 Ergebnissen
|

    Studies of Air Spring Mathematical Model and its Performance in Cab Suspension System of Commercial Vehicle

    Tang, Gang / Zhu, Hengjia / Zhang, Yunqing et al. | British Library Conference Proceedings | 2015

      Studies of Air Spring Mathematical Model and its Performance in Cab Suspension System of Commercial Vehicle

      Tang, Gang / Zhu, Hengjia / Sun, Ying et al. | SAE Technical Papers | 2015
      engine mounting system, the cab suspension system and the seat suspension system. Air spring is widely used in the cab suspension system for its ...
      Verlag: Society of Automotive Engineers , SAE International

    Multi-domain Modeling and Simulation of Vehicle Thermal System Based on Modelica

    Ding, Chao / Tao, Qiming / Zhang, Yunqing et al. | SAE Technical Papers | 2014
    , safety and reliability, driver/passenger comfort, emissions. This paper presents a novel methodology to investigate VTMS based on Modelica ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Simulation and Analysis on a Self-Energizing Synchronizer of Transmission

    Luo, Fan / Li, Jinning / Feng, Xingxing et al. | SAE Technical Papers | 2015
    The structure of a classic self-energizing synchronizer is presented, and a simulation model is developed for analyzing the synchronizer ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Modeling and Optimization of Vehicle Acceleration and Fuel Economy Performance with Uncertainty Based on Modelica

    Qin, Gang / Chen, Hongyan / Chen, Wei et al. | SAE Technical Papers | 2009
    To design and optimize the vehicle driveline is necessary to decrease the fuel consumption and improve dynamic performance. This paper ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Hanger Location Design and Vibration Isolation of an Exhaust System

    Jiang, Ming / Chen, Xiaoxun / Zhang, Yu et al. | SAE Technical Papers | 2014
    that the response force at the hanger can be obtained. Finally, the relationship between the constrained model of the exhaust system and the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development

    An Improved Human Biodynamic Model Considering the Interaction between Feet and Ground

    Jin, Ankang / Yang, James / Zhang, Weiguo et al. | SAE Technical Papers | 2015
    transferred to the human body through floor and seat. This research has constructed a multi-body biodynamic human model with 17 degrees of freedom ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Research and development , Seats and seating

    Robust Design for Vehicle Ride Comfort and Handling with Multi-Objective Evolutionary Algorithm

    Wu, Jinglai / Fu, Wenkui / Luo, Yong et al. | SAE Technical Papers | 2013
    As is known to all, there are some contradictions between the handling and ride performance during the design process of vehicles ...
    Verlag: Society of Automotive Engineers , SAE International

    A New Interval Inverse Analysis Method and Its Application in Vehicle Suspension Design

    Wu, Jinglai / Zhuo, Kaimin / Godara, Vikas et al. | SAE Technical Papers | 2016
    Interval inverse problems can be defined as problems to estimate input through given output, where the input and output are interval ...
    Verlag: Society of Automotive Engineers , SAE International

    In-Plane Flexible Ring Tire Model Development for Ride Comfort & Braking/Driving Performance Analysis under Straight-line Driving Condition

    Li, Bin / Yang, Xiaobo / Zhang, Yunqing et al. | British Library Conference Proceedings | 2015

      In-Plane Flexible Ring Tire Model Development for Ride Comfort & Braking/Driving Performance Analysis under Straight-line Driving Condition

      Li, Bin / Yang, James / Yang, Xiaobo et al. | SAE Technical Papers | 2015
      Vehicle tire performance is an important consideration for vehicle handling, stability, mobility, and ride comfort as well as durability ...
      Verlag: Society of Automotive Engineers , SAE International
      Schlagwörter: Simulation and modeling , Roads and highways

    Special Analytical Target Cascading for Handling Performance and Ride Quality Based on Conceptual Suspension Model and Multi-body Model

    Li, Lingyang / Chen, Liping / Wu, Shiwei et al. | SAE Technical Papers | 2009
    from upper level to lower level. The methodology is applied to achieve improving Handling Performance and Ride Quality (HPRQ) of a passenger ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    A New Interval Inverse Analysis Method and Its Application in Vehicle Suspension Design

    Feng, Xingxing / Zhuo, Kaimin / Wu, Jinglai et al. | British Library Conference Proceedings | 2016

    Sensitivity Analysis on a Synchronization Mechanism for Manual Transmission Gearbox

    Luo, Fan / Li, Jinning / Jiang, Ming et al. | SAE Technical Papers | 2014
    This paper presents the dynamic and analysis models of a typical synchronizer, which are mainly used to analyze the sensitivity of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Multi-domain Modeling and Simulation of Hydraulic Power Steering System Based on Modelica

    Chen, Liping / Chen, Wei / Sun, Ying et al. | SAE Technical Papers | 2010
    used in vehicles. In this paper, a detailed steer model including steering column, steering trapezium, and detailed hydraulic power steering ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Multi-domain Modeling and Simulation of AMT Based on Modelica

    Chen, Liping / Jiang, Ming / Chen, Wei et al. | SAE Technical Papers | 2011
    cities where congestion frequently causes stop-and-go traffic patterns. It uses electronic sensors, processors, hydraulic or pneumatic actuators ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Modeling and Simulation of Hydraulic System with Fuzzy Uncertain Parameters

    Chen, Liping / He, Ping / Chen, Wei et al. | SAE Technical Papers | 2010
    the modeling and simulation of the hydraulic systems. However, these models and parameters are usually established on the basis of plans ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Dampers and shock absorbers

    Synthesis and Analysis of the Double-Axle Steering Mechanism Considering Dynamic Loads

    Qin, Gang / Yang, Jingzhou / Chen, Liping et al. | SAE Technical Papers | 2008
    steering linkage resulted from the elastic deformation of leaf spring, and the effects of wheel slip angle and the position discrepancy of wheel ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Multi-domain Modeling and Simulation of Clutch Actuation System Based on Modelica

    Chen, Liping / Jiang, Ming / Chen, Wei et al. | SAE Technical Papers | 2009
    Clutch actuation systems are complex systems where hydraulic, pneumatic, mechanical and electrical components are coupled. This paper ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    A Polynomial Chaos- Based Likelihood Approach for Parameter Estimation of Load Sensing Proportional Valve

    Wu, Jinglai / Zhang, Yunqing / Ma, Zeyu | SAE Technical Papers | 2013
    Load Sensing Proportional Valve in a heavy truck brake system. This method is derived from polynomial chaos theory and uses the maximum ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Modeling, Experimentation and Sensitivity Analysis of a Pneumatic Brake System in Commercial Vehicles

    Wu, Jinglai / Jiang, Ming / Zhang, Yunqing et al. | SAE Technical Papers | 2014
    response time for driving safety using DOE (Design of Experiment) method. To achieve this purpose, this paper presents the development and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Reaction and response times

    Optimization of Suspension Elastomeric Bushing Compliance Under Constraints of Handling, Ride and Durability

    Li, Lingyang / Chen, Liping / Wu, Shiwei et al. | SAE Technical Papers | 2010
    Elastomeric bushings are widely used in the passenger cars to make the cars have an ideal vehicle Noise, Vibration and Harshness (NVH ...
    Verlag: Society of Automotive Engineers , SAE International