1–20 von 44 Ergebnissen
|

    Development of energy efficient heat treatment processes for light weight automotive castings

    Kasprzak, W. / Sokolowski, J.H. / Yamagata, H. et al. | Tema Archiv | 2009
    Experimental results pertaining to the development of energy efficient heat treatment processes for vacuum High Pressure Die Casting (HPDC ...

    Application of air-hardening steels for highly stressed structural parts with simplified heat treatment

    Flaxa, Volker / Guettler, Jürgen / Rieth, Marcus et al. | Tema Archiv | 2014
    intermediate annealing. With a subsequent heat treatment, tensile strength levels higher than 800 MPa can be achieved. In this case, the components are ...
    Schlagwörter: Anlassen (Wärmebehandlung)

    Heat treating SAE 5160 automotive leaf springs in a polymer quenchant

    Auchter, R. | Tema Archiv | 1998
    Oil has been traditionally used for quenching SAE 5160 automotive leaf springs. Advancements in quenching technology, primarily polymer ...
    Verlag: ASM International , Materials Park

    Surface treatment selections for automotive applications

    Vetter, Joerg / Barbezat, G. / Crummenauer, J. et al. | Tema Archiv | 2005
    PVD, PECVD, thermochemical heat treatment and thermal spraying. These new treatments are becoming more and more common in powertrain and ...

    Light weight in the automotive industry - a challenge for hot tool steel industry

    Schruff, I. / Greeb, T. | Tema Archiv | 2011
    supplier of hot-work tool steels but also operates a modern vacuum heat treatment shop, the company set up one of the largest vacuum hardening ...

    Hemming of aluminum automotive sheet

    Mattei, L. / Daniel, D. / Guiglionda, G. et al. | Tema Archiv | 2008
    The need for weight reduction in the automotive industry has led to the development of aluminum alloys for body panels on a number of mass ...
    Schlagwörter: Wärmebehandlung (Materialbearbeitung)

    Trends in automotive steel development

    Bleck, Wolfgang | Tema Archiv | 2012
    automotive industry in many different fields, e.g. light-weight design, easy manufacturing, cost performance. This paper presents examples of ...
    Schlagwörter: Wärmebehandlung

    High temperature agent gasification of microwave pyrolysed chars from automotive shredder residue

    Donaj, Pawel / Blasiak, Wlodzimierz / Yang, Weihong | Tema Archiv | 2010
    Presently, there is a growing need for handling Automobile Shredder Residues - ASR or 'car fluff'. One of the most promising methods of ...
    Schlagwörter: Automobil

    Development of cold-rolled high-strength formable steel for automotive applications

    Bhagat, A.N. / Singh, Avtar / Gope, N. et al. | Tema Archiv | 2010
    automobile is one of the ways to overcome this problem, and hence the automakers need a stronger and formable material for advanced vehicle ...
    Schlagwörter: Wärmebehandlung (Materialbearbeitung)

    Distribution characteristics of PCDDs/PCDFs in products generated from pyrolysis/ gasification/ melting process of automobile shredder residues

    Joung, Hyun-Tae / Cho, Sung-Jin / Seo, Yong-Chil et al. | Tema Archiv | 2007
    , the residue (automobile shredder residue; ASR) is left and this can be converted into any fuel forms such as gas, oil, or char using pyrolysis ...
    Schlagwörter: Automobil

    NITREG: controlled nitriding applied in automotive industry

    Liliental, W.K. / Morawski, C.D. / Czelusniak, A. | Tema Archiv | 1994
    tested out and selected for an increasing variety of applications in the automotive industry, meeting specification requirements where wear and ...
    Verlag: ASM International , Materials Park

    Characterization of magnesium automotive components produced by super-vacuum die casting process

    Sadayappan, K. / Kasprzak, W. / Brown, Z. et al. | Tema Archiv | 2009
    Magnesium automotive components are currently produced by high pressure die casting. These castings cannot be heat-treated to improve the ...
    Schlagwörter: Wärmebehandlung

    Development of automotive door inner panel using AA5J32 tailor rolled blank

    Jeon, S.J. / Kim, B.M. | Tema Archiv | 2011
    properties of made of heat treatment condition of three types. It was measured to evaluate formability by the limiting dome height test. Full-filed ...

    Properties of weld joints of bake-hardening steel for automobile

    Katayama, T. / Matsui, F. / Yoshida, N. et al. | Tema Archiv | 2004
    was plastically strained followed by Nd:YAG laser welding or TIG welding and subsequent heat treatment (assembly type weld). Then the ...
    Verlag: ASM International , Materials Park
    Schlagwörter: Wärmebehandlung (Materialbearbeitung)

    Large profile magnesium alloys extrusions for automotive applications

    Rosen, G.I. / Segal, G. / Lubinsky, A. | Tema Archiv | 2005
    microstructure formed over Direct Chill (DC) casting, homogenization, extrusion and subsequent heat treatment, no processing step can be isolated from ...

    Application of aluminium foam for automotive brake pistons

    Lehmhus, D. / Weber, M. / Wollenweber, K.H. | Tema Archiv | 2001
    Gegenwärtig wird vom Fraunhofer IFAM Bremen in Kooperation mit TRW Automotive, Koblenz eine neue Generation von Bremskolben entwickelt, die ...

    Materials concepts for high strength and ultra high strength automotive applications

    Große-Heilmann, Niko / Peters, Andreas | Tema Archiv | 2011
    Schlagwörter: Anlassen (Wärmebehandlung)

    Ecological lifecycle assessment of an electric drive for the automotive industry

    Klocke, F. / Lung, D. / Schlosser, R. et al. | Tema Archiv | 2012
    properties (e.g. heat treatment of shaft). Physical measurement techniques will later be applied in order to determine the absorbed flows of ...

    Innovation in the use of aluminum alloy for forming industrial automotive components

    Ceretti, E. / Giardini, C. / Maccarini, G. | Tema Archiv | 2002
    This paper describes the results obtained studying the feasibility of stamped automotive components by using aluminum alloys instead of ...
    Schlagwörter: Wärmebehandlung

    Cold-formed shapes for high performance automotive components

    Engineer, Serosh | Tema Archiv | 2005
    of the material and heat treatment technology as well as a sophisticated tool making process is required. A basic comment is made on the ...