41–60 von 2,894 Ergebnissen
|

    Study on the Cooling Method of Car Engine Pistons - Part 2, Cooling Using Heat Pipes

    Takahashi, Atsushi / Matsumoto, Kenji / Inoue, Tsutomu | SAE Technical Papers | 2015
    , suggesting the possibility of efficient cooling. Although this analysis is based on a number of assumptions and there are issues of durability and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    Improve Heat Dissipation Rate of the Vehicle Radiator by Using Carbon Foam Material for the Fin

    Kale, Dhananjay | SAE Technical Papers | 2013
    -celled structure.An engineering model is formulated to account for the effects of porosity and pore diameter on the hydrodynamic and thermal ...

    Study of Installation Effects on Automotive Cooling Fan Noise

    Weng, Chenyang / Knutsson, Magnus / Abom, Mats et al. | SAE Technical Papers | 2022
    main noise source on conventional vehicles, noise from other components becomes more perceivable; among these components, the cooling fan is ...
    Verlag: Society of Automotive Engineers , SAE International

    Electrical Operated Fan for Cooling System on Agricultural Tractors

    S, Manikandan / P, Nageshwara Rao / Babu, Rathish Maller | SAE Technical Papers | 2019
    Internal combustion engines involve various parasitic losses on vehicle level like that of Cooling Fans, Hydraulic pumps, Air compressors ...
    Verlag: Society of Automotive Engineers , SAE International

    Study of Cooling Drag Reduction Method by Controlling Cooling Flow

    Shindo, Fuminori / Kuroda, Hiroshi / Evans, Nic et al. | SAE Technical Papers | 2014
    , cooling specification tends to be determined based on low speed, while towing or driving up mountain roads, and therefore, there may be extra ...
    Verlag: Society of Automotive Engineers , SAE International

    Novel Transport Cooling System Utilising Liquid, Pumpable Ice ("Binary Ice")

    Paul, I. J. / International Symposium on Automotive Technology and Automation | British Library Conference Proceedings | 1999

    Effects of Ethanol Evaporative Cooling on Particulate Number Emissions in GDI Engines

    Cheng, Wai K. / Zhang, Yihao / Chen, Yu | SAE Technical Papers | 2018
    PMI value addresses the fuel effect on PN emission through the individual fuel species reactivity and vapor pressure. The latter quantity is ...
    Verlag: Society of Automotive Engineers , SAE International

    Study on Passenger Cabin under Passive Radiative Cooling Film

    Zheng, Chao / Luo, Xin / Chao, Yipeng et al. | SAE Technical Papers | 2022
    calculated and analyzed based on the heat balance equation. The influence of radiative cooling film on the temperature field of passenger cabins was ...
    Verlag: Society of Automotive Engineers , SAE International

    The Effects of Cooling Air on the Flow Field around a Vehicle

    Link, Alexander / Bock, Benjamin / Schoenleber, Christoph et al. | SAE Technical Papers | 2016
    Cooling air flow is an important factor when it comes to vehicle performance and operating safety. In addition, it is closely linked to ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Spray Cooling Modeling: Droplet Sub-Cooling Effect on Heat Transfer

    Johnston, J.E. / Selvam, R.P. / Silk, E.A. | British Library Conference Proceedings | 2008

    Comparative Study on the Effects of Inlet Heating, Inlet Boosting, and Double-Injection Strategy on Partially Premixed Combustion

    Somers, Bart / Han, Jinlin / Wang, Shuli | SAE Technical Papers | 2019
    pressure rise rate, fast heat release and even misfires. To solve these problems and maintain high efficiency simultaneously, inlet heating, inlet ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Passenger Cabin’s Parking Cooling System Based on TEC and Air Conditioning Condensate Water

    Zhou, Daolin / Tan, Gangfeng / Li, Ming et al. | SAE Technical Papers | 2019
    panel was mounted on the roof, and verifying the cabin’s cooling effect of using condensate water. Experimental results: In the case of only ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: CAD, CAM, and CAE , Sun and solar

    “Omega” Fin Design for Enhanced Cooling Capability on IGBTs

    Costello, Brian / Collins, Ryan | SAE Technical Papers | 2020
    Vehicle electrification is a rapidly growing and developing technology. As with any new technology there are hurdles that must be overcome ...
    Verlag: Society of Automotive Engineers , SAE International

    Cylinder Cooling for Improved Durability on an Opposed-Piston Engine

    Wahl, Michael / Lee, Patrick | SAE Technical Papers | 2012
    the inlet near the intake port to the outlet near the exhaust port. This approach yields uneven cooling both longitudinally and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Air and Cooling Systems

    Carl, U. / Salvato, F. / International Council of the Aeronautical Sciences | British Library Conference Proceedings | 2006

    Alternate Approach: Acoustics and Cooling Performance Management

    Koutsavdis, Evangelos / Ghazialam, Hamid / Singh, Jagdeep et al. | SAE Technical Papers | 2018
    ) techniques based on Navier Stokes (N-S) and Lattice Boltzman methods are becoming popular, predicting aeroacoustic behavior for complex geometries ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Localized Cooling for Human Comfort

    Ghosh, Debashis / Arens, Edward / Wolfe, Edward et al. | SAE Technical Papers | 2014
    cooling down a soaked car. Similarly for heating, the entire cabin is typically warmed up to achieve comfort.Localized heating and cooling, on the ...
    Verlag: Society of Automotive Engineers , SAE International

    A Progress Review on Heating Methods and Influence Factors of Cold Start for Automotive PEMFC System

    Liu, Pengcheng / Xu, Sichuan | SAE Technical Papers | 2020
    classified into self-heating strategies and auxiliary-heating heating depending on their heating sources providing approach. Then, the next part will ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Starters and starting

    A Review on Vehicle Cabin Heating Solutions for Cold Ambient Conditions

    Rana, Satyendra / Suman, Saurabh / Kushwah, Yogendra Singh | SAE Technical Papers | 2022
    In electric vehicles, along with cooling and heating requirement of battery, cabin atmosphere also need to be controlled according to human ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Weather and climate , Heating, ventilation, and air conditioning systems (HVAC)

    On-Vehicle Controllable Cooling Jets

    Vagenas, A. / Brace, C. J. / Hawley, J. G. et al. | SAE Technical Papers | 2004
    coolant at a lower temperature than that within the engine and on the availability of a suitable measurement technology within the thermally ...
    Verlag: Society of Automotive Engineers , SAE International

      On-Vehicle Controllable Cooling Jets

      Vagenas, A. / Hawley, J. G. / Brace, C. J. et al. | British Library Conference Proceedings | 2004
      Verlag: SAE International