1–50 von 2,383 Ergebnissen
|

    Optimization of Cooling Air Flow for Improved Heat Dissipation through Radiator

    Aher, Amit / Palve, Chandrakant / Thakur, Paurnima et al. | SAE Technical Papers | 2024
    Engine cooling system, which will ensure optimum operating range of internal combustion engine through precise control on coolant flow rate by ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Engine cooling systems

    Powertrain and Cabin Cooling Performance Improvement by Optimization of Its Components

    Mirajkar, Nilesh Shridhar / Khairnar, Rohit | SAE Technical Papers | 2024
    vehicle.Also, this paper covers the experiments conducted and their respective findings on optimization of cooling performance and methodology for same. ...
    Verlag: Society of Automotive Engineers , SAE International

    Design and Optimization of Air Intake and Cooling System for Commercial Fuel Cell Electric Vehicles

    Adsul, Aniket / Gadve, Dhananjay / Amancharla, Naga Chaithanya et al. | SAE Technical Papers | 2024
    information available in the public domain about fuel cell technology and its accessories.Air intake and cooling system’s right functioning is very ...
    Verlag: Society of Automotive Engineers , SAE International

    Flexible Heating and Heat Retention Technology for Efficient Treatment of Exhaust Gases in Diesel Engines

    YS, Ananthkumar / M, Jayashree / K, Sabareeswaran | SAE Technical Papers | 2024
    heating in the course of low load cycles and cold city rides for efficient gas conversion. As they are used to accelerate the light-off ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Environmental regulations and standards

    Study on Range Improvement Controls and Method for Electric Vehicles

    Pattalwar, Ashutosh / Verma, Mrinal / Bawa, Vikas et al. | SAE Technical Papers | 2024
    temperature under safe usable limits even during harsh conditions is critical. Simple reduction in energy consumption of electrical cooling/heating ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: On-board vehicle charging systems

    A Review on Fire Prevention and Suppression Solutions for EV Battery Packs

    G M, Bharath / P, Hari Prasad Reddy / H, Manjunatha et al. | SAE Technical Papers | 2024
    , passive heat dissipation using heat carrier pads, thermal insulating materials to prevent thermal propagation, safety vents to remove ejecta, and ...
    Verlag: Society of Automotive Engineers , SAE International

    Computational Study on the Influence of the Radiator in Vehicle Overall Performance

    Buscariolo, Filipe Fabian / Gonzales, José Fernando Paz / Alves, Julio Cesar Lelis | SAE Technical Papers | 2024
    One of the key components in engine cooling system design in internal combustion vehicles is the radiator, which is responsible not only ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Engine cooling systems

    Effect of Spot Weld Parameter on HAZ of Advanced High Strength Steel Joint

    Paliwal, Lokesh / Misal, Swapnali / Jain, Vikas | SAE Technical Papers | 2024
    hardening. However during heating and cooling cycle in resistance spot welding, martensite phase tempering affects hardness at Heat Affected Zone ...
    Verlag: Society of Automotive Engineers , SAE International

    Effect Analysis of Form Factor on Thermo-Electric Generator Performance

    Ponangi, Babu Rao / Bali, Gaurav / Mutagi, Megha Dharnendra | SAE Technical Papers | 2024
    gases in IC engine-based vehicles and from batteries and fuel cell heating in green vehicles. This waste heat, also known as thermal energy, has ...
    Verlag: Society of Automotive Engineers , SAE International

    The Effect of Different Air Path Based ATS Thermal Management Strategy on a Non- EGR Medium Duty Diesel Engine’s Performance and Emissions

    Sharma, Ajeet Kumar / Gupta, Ayush / Goyal, Dinesh et al. | SAE Technical Papers | 2024
    stringent and with the introduction of Real Drive Emission Test (RDE) and WHTC test comprising of both cold and hot phase, there is a need to ...
    Verlag: Society of Automotive Engineers , SAE International

    3-D Multiphase Flow Simulation of Coolant Filling and Deaeration Processes in an Engine Coolant System

    Maiti, Dipak / Saha, Rohit / Pasunurthi, Shyam Sundar et al. | SAE Technical Papers | 2024
    efficiency. However, it is expensive and time consuming to identify air entrapped locations in tests, decide on the filling strategy and make the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    A Real-World Range Testing and Analysis Methodology Development for Battery Electric Vehicles

    Rajakumar, K. / Omprasad, Karthick / B, Sakthivel et al. | SAE Technical Papers | 2024
    multiple drive modes and regen levels respectively. Also, other attributes such as AC On/Off condition, different loading condition i.e., Number of ...
    Verlag: Society of Automotive Engineers , SAE International

    Cost Effective Techniques for SCEV to Improve Performance & Life of Battery and Motor by Using Efficient Thermal Systems

    Chormule, Suhas Rangrao | SAE Technical Papers | 2024
    systems for battery, motor, cabin and power electronics cooling & heating during various charging and discharge modes at different ambient ...
    Verlag: Society of Automotive Engineers , SAE International

    Optimization of Oil Quantity in Manual Transmission and Reducing Churning Loss

    Ks, Dhianeshwar / G R, Santosh / Ramaswamy, Sarathkumar et al. | SAE Technical Papers | 2024
    levels.Similarly, higher oil level creates higher churning losses, heating of the Gear oil and oxidation, reduction in efficiency and increased oil ...
    Verlag: Society of Automotive Engineers , SAE International

    Integrated Simulation Methodology to Predict Engine Head, Block, and Piston Temperatures

    Sahu, Abhay Kumar / Das, Debasis / Chakkamadathil, Shirdi | SAE Technical Papers | 2024
    , while cooling and lubrication surface boundary condition are mapped from 1D system simulation or experimental data. The heat transfer boundary ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Simulation and modeling

    A Study of Engine Oil Aeration in IC Engines and Factors Contributing It

    Kamboj, Jagdish / Attri, Mayank / Yadav, Vimal | SAE Technical Papers | 2024
    friction, cooling, supporting the load, and cleaning debris from the engine’s various moving components. Oil aeration refers to the phenomenon of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Test equipment and instrumentation

    An Optimum Solution to Meet the Thermal Load Challenge in a High Mobility Military Vehicle

    Rao, Bonthala / Kiran, Nalavadath / AT, Shajahan | SAE Technical Papers | 2024
    challenging. With the adverse climatic condition and driving terrains, the criticality of Engine cooling system is intensified. In this paper, a ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Military vehicles and equipment , Engine cooling systems

    Design and Development of E-axle as a Retro and OE Fitment Solution for Light Commercial Vehicles Ranging from 1.5 to 5 Ton GVW

    Vaibhav, Kumar / Mulik, Rakesh Vilasrao / Shrikrishna Ramdasi, Sushil | SAE Technical Papers | 2024
    . Though initially CAPEX cost is on higher side mainly due to present price range of Li Ion batteries, the OPEX cost and maintenance cost of ...
    Verlag: Society of Automotive Engineers , SAE International

    Predictive under Hood Thermal Management Model

    P V, Navaneeth / ML, Sankar / Prasad, Suryanarayana A N | SAE Technical Papers | 2024
    , charge air cooling, air conditioning and turbocharger cooling. The appropriate thermal management of these critical components is necessary for ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    Advance Thermal Management System for Electric Vehicle – An Indian Case Study

    Emran, Ashraf / Pawar, Bhushan / Hemkemeyer, David et al. | SAE Technical Papers | 2024
    (e.g., intelligent pre-conditioning, cabin air circulation control and smart ventilation) for cooling, heat pump integration along with the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Low emission vehicles (LEV) and zero emission vehicles (ZEV)

    Development of a Fuel Efficiency Enhancement Module for Tractors

    Chinnathambi, Manikandan / Nabar, Omkar / Arjun, P. et al. | SAE Technical Papers | 2024
    increased power requirements. The developed system was installed on a 45 hp 2-wheel drive tractor, and its performance was evaluated. Field trials ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Agricultural vehicles and equipment

    A Novel Approach to Make an Efficient Thermal Management of a Solar Electric Four-Wheeler through Model-Based System Simulation

    Gumma, Muralidhar / Karthikeyan, Vikram Raj | SAE Technical Papers | 2024
    solar radiation, ambient temperature & and humidity, human metabolic activity, and other loads like the propulsion system temperature on the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Sun and solar

    HVAC NVH Refinement in Electric Vehicle

    Manivannan, Giridharan / Rao, Manchi / S, Nataraja Moorthy et al. | SAE Technical Papers | 2024
    levels to a great extent in the vehicle without adding cost and weight.This paper focuses on reducing the tactile vibration in electric vehicle ...
    Verlag: Society of Automotive Engineers , SAE International

    Virtual Test Bed (VTB) Based Engine Calibration: Unique Approach to Ensure Engine Component Protection & to Meet WNTE in Different Environment Condition for Medium Duty Diesel Engine

    Sharma, Ajeet Kumar / Vos, Bas / Goyal, Dinesh et al. | SAE Technical Papers | 2024
    and load profiles and varying ATS layouts. Therefore, robust thermal measures are required to ensure adequate heating of ATS under various ...
    Verlag: Society of Automotive Engineers , SAE International

    Study of Critical Vias Design Parameters for Power Electronics Thermal Management

    Dougherty, Derek / Bhardwaj, Divyanshu / Patil, Sachin et al. | SAE Technical Papers | 2024
    sink/ cold plate design parameters like fin spacing, thickness, height etc. or sizing of the required cooling pump/fan. This paper focuses on ...
    Verlag: Society of Automotive Engineers , SAE International

    Multiphysics Simulation Supporting Systems Engineering for Fuel Cell Vehicles

    Reiter, Anton / Poetsch, Christoph / Ritzberger, Daniel et al. | SAE Technical Papers | 2024
    layout and sizing of the stack and the related fuel and air supply system components, as well as the suitable dimensioning of the cooling system ...
    Verlag: Society of Automotive Engineers , SAE International

    Hydrogen Refilling Optimizations Through 1-D Simulations for Commercial Vehicles

    Chougule, Abhijeet / Bhut, Bhaveshkumar / Jacob, Joe et al. | SAE Technical Papers | 2024
    Fuel cell electric vehicles (FCEVs) and battery electric vehicles are being touted worldwide by the automotive industry and policy makers ...
    Verlag: Society of Automotive Engineers , SAE International

    Numerical Analyses of AdBlue® Thawing Performance According to EU Norms

    Varughese, Shibu / Banik, Soumendu / Govindarajan, Vaishali et al. | SAE Technical Papers | 2024
    Controlling NOx emission demand is getting more severe with Euro 7 legislation. In turn, this brings more focus on SCR (Selective Catalytic ...
    Verlag: Society of Automotive Engineers , SAE International

    Study on Driving Forms and Control of Engine Cooling Fan

    Shangguan, Wenbin / Wang, Xihui / Wang, Xinling et al. | SAE Technical Papers | 2023
    The influence of engine cooling fan on the working state of engine cooling system under different driving forms and control strategy is ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems , Simulation and modeling

    Calculation of Cooling Fan Blade Deformation and Aerodynamic Performance Based on Fluid-Structure Model

    Lin, HuiBin / Shangguan, Wenbin / Wang, Xinling et al. | SAE Technical Papers | 2023
    Considering the interaction between fan blades and the surrounding air when a cooling fan rotates, the Fluid-Structure Interaction (FSI ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    Topology Optimization Design on Cooling-Plate for Lithium-ion Battery Based on Electro-Thermal Model

    Xie, Beichen / Ding, Kangjie / Lin, Zhenmao | SAE Technical Papers | 2023
    according to the heat dissipation requirements of lithium-ion power batteries under actual working conditions. Firstly, given the non-uniform heat ...
    Verlag: Society of Automotive Engineers , SAE International

    Effect of Cabin Insulation on the Heating Performance in EVs at Low Temperatures

    Ramesh Babu, Anandh / Sebben, Simone / Bark, Tore | SAE Technical Papers | 2023
    passenger car, and the influence of insulation on different surfaces while climatizing under low ambient temperatures. A conjugate heat transfer ...
    Verlag: Society of Automotive Engineers , SAE International

    Modeling and Simulation Analysis of Electric Vehicle Battery Cooling System

    Deng, Bin / Zhou, Fu-Peng / Zheng, Quanxin et al. | SAE Technical Papers | 2023
    and analyzed, and the accuracy of the models were verified. The effects of coolant flow rate and radiator wind speed on the liquid cooling ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Simplified Modeling of an Innovative Heating Circuit for Battery Pack Based on Traction Motor Drive System

    Dai, Haifeng / Huang, Ranjun / Wang, Xinjian | SAE Technical Papers | 2023
    Alternating current (AC) heating is an efficient and homogeneous manner to warm Lithium-ion batteries (LIBs) up. The integrated design of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Heating, ventilation, and air conditioning systems (HVAC)

    CFD Simulation and Modelling of a Battery Thermal Management System: Comparison between Indirect and Immersion Cooling

    Rizzello, Alessandro / Strano, Daniele Isidoro / Ricci, Federico et al. | SAE Technical Papers | 2023
    paper mainly focuses on the thermal problems affecting the BTMS and sets two main goals: 1) to provide a comparison of two possible BTMS ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Computational Modeling of the Flow and Heat Transfer in an Internal Combustion Engine-Relevant Cooling Channel

    Klink, Artur / Hussong, Jeanette / Krüger, Louis et al. | SAE Technical Papers | 2023
    flow and heat transfer processes relevant to cooling systems of internal combustion engines, was computationally investigated by applying a ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Simulation and modeling , Research and development

    Variable-Efficiency Traction Inverter Provides Low Cost Multi-kW Coolant Heating

    Turudic, Andy | SAE Technical Papers | 2023
    , and is ~40x lower than the peak heating levels needed to warm a passenger cabin.Rather than resort to convention by adding expensive and ...
    Verlag: Society of Automotive Engineers , SAE International

    Study of Surface Insulation Structures to Reduce Cooling Loss in Heavy-Duty Diesel Engines

    Kawaharazuka, Fumihiro / Uchida, Noboru | SAE Technical Papers | 2023
    -cylinder cooling loss reduction studies have been carried out by applying various thermal barrier coatings to the piston and/or other in-cylinder ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Simulation Based Sensitivity Study of Piston Cooling Performance Parameters in Automotive Diesel Engines

    Sahu, Abhay Kumar / Chakkamadathil, Shirdi Dilipkumar / Gombi, Shrirang | SAE Technical Papers | 2023
    design and its cooling. To mitigate the likelihood of failure or damage to pistons, it is important to have a thorough understanding of the ...
    Verlag: Society of Automotive Engineers , SAE International

    Piston Pre-Heating Using a Pressurized-Heated Oil Buffer: A Practical Method to Reduce ICE Emissions and Fuel Consumption

    Bovo, Mirko / Mubarak Ali, Mohammed Jaasim | SAE Technical Papers | 2023
    cooling nozzles. The device provides further benefits in emissions and fuel consumption in two ways: 1) the warm oil pre-lubricates the engine ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Understanding Hydrocarbon Emissions to Improve the Performance of Catalyst-Heating Operation in a Medium-Duty Diesel Engine

    Wu, Angela / Lopez Pintor, Dario / Cho, Seokwon | SAE Technical Papers | 2023
    , and based on the understanding, develops combustion strategies to simultaneously improve exhaust ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    CFD Assessment of an After-Treatment System Equipped with Electrical Heating for the Reduction of the Catalyst Light-Off Time

    Onorati, Angelo / Della Torre, Augusto / Gullino, Fabrizio et al. | SAE Technical Papers | 2023
    vehicles tested on homologation cycles and real drive conditions. The adoption of heating strategies to increase the temperature of the catalytic ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Starters and starting

    Investigation of Solenoid-Controlled Piston Cooling Jet Benefits for a 1.5l, 3 Cylinder Tcic Diesel Engine

    VIGNESH, A. C. / Sithick basha, Abubakker / Dharan R, Bharani et al. | SAE Technical Papers | 2023
    government. To meet the government norms such as CAFE (Corporate Fuel Average Economy), different technologies are being explored and implemented in ...
    Verlag: Society of Automotive Engineers , SAE International

    Sliding Mesh Fan Approach Using Open-Source Computational Fluid Dynamics to Investigate Full Vehicle Automotive Cooling Airflows

    Guzman, Arturo / Vilchis Contreras, Eloy / Doroudian, Mark | SAE Technical Papers | 2023
    Cooling airflow is an essential factor when it comes to vehicle performance and operating safety. In recent years, significant efforts have ...
    Verlag: Society of Automotive Engineers , SAE International

    A CFD-Based Numerical Evaluation, Assessment and Optimization of Conjugate Heat Transfer for Aerodynamic Cooling of a Wheel-Hub-Motors in Micro-Mobility Vehicles

    Mambazhasseri Divakaran, Arun / Abo-Serie, Essam / Gkanas, Evangelos et al. | SAE Technical Papers | 2023
    parameters (Fins and air-vents/holes) in cooling the motor. Air vents and external fins on rotor–lid (rotor cover) has a greater effect on cooling ...
    Verlag: Society of Automotive Engineers , SAE International

    Influence of operating conditions on thermal requirements in gas turbine blades

    L.R., Marconi / F.A.F, Monhol / C.P.S., Silva | SAE Technical Papers | 2023
    its rotors through internal cooling technologies. By means of a thermodynamic modeling of the process and the use of the finite difference ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    Experimental Comparison of Diesel and Wet Ethanol on an Opposed-Piston Two Stroke (OP2S) Engine

    Bhatt, Ankur / Lawler, Benjamin / Gainey, Brian et al. | SAE Technical Papers | 2023
    hole size of the injector was not increased, and from evaporation-driven heat removal near top dead center. However, further optimization of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Impact of Thermal Barrier Coatings on Intake and Exhaust Valves in a Spark Ignition Engine

    Lawler, Benjamin / Gainey, Brian / Jiang, Chen et al. | SAE Technical Papers | 2023
    eliminating the open cycle charge heating penalty of traditional TBCs through a combination of low thermal conductivity and low volumetric heat ...
    Verlag: Society of Automotive Engineers , SAE International

    Analysis of the Thermodynamic Effects of a Plate Based on Numerical Simulations

    Qaisar, Abdul / Asary, Abdul Rab / Azeem, Naqash et al. | SAE Technical Papers | 2023
    exchanged between two mediums, the wall or material in-between them is exposed to extreme temperatures (high and low), commonly known as a cooling ...
    Verlag: Society of Automotive Engineers , SAE International

    Exploration of Fuel Property Impacts on the Combustion of Late Post Injections Using Binary Blends and High-Reactivity Ether Bioblendstocks

    Rothamer, David / Subramanian, Srinath | SAE Technical Papers | 2023
    In this study, the impacts of fuel volatility and reactivity on combustion stability and emissions were studied in a light-duty single ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes