1–20 von 62 Ergebnissen
|

    Technique for Reliability Circuit Design Review in Space Electronics

    Franciscovich, P. J. | SAE Technical Papers | 1967
    of circuits. The review items include worst-case circuit performance, component applications, failure mode analysis, noise rejection ...
    Verlag: Society of Automotive Engineers , SAE International

    MOS Reliability Prediction Model

    Aaron, D. M. / Adam, M. F. | SAE Technical Papers | 1970
    bipolar IC postmortem analysis was analyzed, normalized and related to the commonalities of MOS technology. The failure mechanisms were grouped ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Failure modes and effects analysis

    Diagnostic testing of transformers on British Railways

    Bradwell, A. / Smith, D.A. / Harrison, N. et al. | Tema Archiv | 1988
    . Dissolved gas analysis (DGA) is now well established as a diagnostic technique (BS5800: 1979) and can determine from a small oil sample taken on ...

    Development of an Extravehicular Activity Self Rescue Technique for Space Station

    Brody, Adam / Lomax, Curtis | SAE Technical Papers | 1989
    vehicle are shielded. Among these are suit depressurization as a result of micrometeoroid impact and portable life support system (PLSS) failure ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Failure modes and effects analysis

    Analysis of Lunar Membrane Structures for Potential Failure Scenarios

    Day, J. / Richter, P. / American Society of Civil Engineers; Aerospace Division | British Library Conference Proceedings | 1996

    High strain rate behavior of the component materials of an integral armor

    Mahfuz, H. / Gama, B.A. / Raines, R.P. et al. | Tema Archiv | 1997
    momentum trapping device. The strain rate effects on the initial modulus, failure stress and failure strain through-the-thickness of the integral ...
    Verlag: Society for the Advancement of Material and Process Engineering (SAMPE) , Covina
    Schlagwörter: Ausfallanalyse

    Aspects of Weld Metallurgical Characteristics and Fracture Mechanism in Formability Tests of Non-Vacuum Electron Beam Tailor-Welded AA5754-O temper Aluminum Blanks

    Altshuller, Bernie / Feng, Frank / Wang, Hermina et al. | SAE Technical Papers | 2000
    forming.Metallography, microhardness measurement, electron probe chemical analysis and fractography for 1-2 mm NVEB AA5754-O temper of Al TWBs were used to ...
    Verlag: Society of Automotive Engineers , SAE International

    Reliability Prediction for Automotive Components in Field Use

    Meyna, Arno / Pauli, Bernhard / Meyer, Matthias et al. | SAE Technical Papers | 2002
    extension of the reliability prediction model from Pauli [1], which was originally developed for the analysis of electronic control units. The model ...
    Verlag: Society of Automotive Engineers , SAE International

    A Study on Chipping Failure of Automotive Coatings

    Sugai, Hideo / Nakamura, Shigeru / Tanaka, Takeshi et al. | SAE Technical Papers | 2003
    . about 1/1000 second and the energy has caused film destructions and/or detachment between film layers and/or vibration absorption. There was a ...
    Verlag: Society of Automotive Engineers , SAE International

    Experimental Identification of Distributed Damping Matrices Part 1: Analytical Case Studies

    Phillips, Allyn / Kim, Jay / Hylok, Jeff | SAE Technical Papers | 2003
    examples are simulation of structure-borne noise, stability analysis of dynamic systems and numerical prediction of fatigue failure. In these ...
    Verlag: Society of Automotive Engineers , SAE International

    Failure analysis of a non-integral pipeline collet connector

    Fassina, P. / Guagliano, M. / Lazzari, L. et al. | Tema Archiv | 2005
    This paper describes the failure analysis carried out on a 12''-non-integral pipeline collet connector, joining a 12''-pipeline with an ...

    Reverse engineering gone wrong: a case study

    McEvily, A.J. | Tema Archiv | 2005
    replacement parts. The second manufacturer used a process known as reverse engineering in manufacturing the parts. That is, he attempted to copy in ...
    Schlagwörter: Störfallanalyse

    Some key effects on the failure assessment of weld repairs in CrMoV pipelines using continuum damage modelling

    Sun, W. / Hyde, T.H. / Becker, A.A. et al. | Tema Archiv | 2005
    , etc., on the failure life of the repaired welds. The potential uses and limitations of the damage analysis for weld repair performance ...

    Computational and experimental crash analysis of the road safety barrier

    Ren, Z. / Vesenjak, M. | Tema Archiv | 2005
    The paper describes the computational analysis and experimental crash tests of a new road safety barrier. The purpose of this research was ...

    Best practice for the assessment of defects in pipelines - gouges and dents

    MacDonald, K.A. / Cosham, A. | Tema Archiv | 2005
    a combination of good design, materials and operating practices. However, like any engineering structure, pipelines do occasionally fail ...

    Fracture in a rubber-sprung railway wheel

    Richard, H.A. / Fulland, M. / Sander, M. et al. | Tema Archiv | 2005
    In the year 1998 near Eschede the German ICE-high speed train Wilhelm-Conrad Röntgen got into an accident on its way from Munich to Hamburg ...

    Comparative fatigue assessment of soft toe and nested bracket welded aluminium structures

    Irving, S. / Ferguson-Smith, F. / Hu, X.Z. et al. | Tema Archiv | 2005
    loading. The higher stress was not localised, with an area on the curve edges showing a gradual reduction in the stress level. Failure of the ...

    Modelling the sources of cracking of aircraft compressor vanes rings

    Nash, D.H. / Dempster, I.R. | Tema Archiv | 2005
    required in order to assess the effect of the crack, to see if further propagation will result. Such cracks have been found on a compressor vane ...

    A deep-ocean mass spectrometer to monitor hydrocarbon seeps and pipelines

    McMurtry, Gary M. / Wiltshire, John C. / Bossuyt, Arnaud | Tema Archiv | 2005
    New developments in instrumentation for ocean environmental engineering are allowing unprecedented levels of trace contaminant measurement ...

    Status review on fatigue performance of fillet welds

    Maddox, Stephen J. | Tema Archiv | 2006
    A recent joint-industry project addressing the fatigue design of weld details in FPSO vessels focused on potential fatigue failure from ...