1–20 von 49 Ergebnissen
|

    Impact of the Nozzle Coking on Spray Formation for Diesel Injectors

    Montanaro, Alessandro / Allocca, Luigi | SAE Technical Papers | 2013

    Iso-Octane Spray from a GDI Multi-Hole Injector under Non- and Flash Boiling Conditions

    Montanaro, Alessandro / Allocca, Luigi / Lazzaro, Maurizio | SAE Technical Papers | 2017

    Effects of the Ambient Conditions on the Spray Structure and Evaporation of the ECN Spray G

    Montanaro, Alessandro / Meccariello, Giovanni / Allocca, Luigi | SAE Technical Papers | 2019

    Effects of Ultra-High Injection Pressures up to 100 MPa on Gasoline Spray Morphology

    Montanaro, Alessandro / Meccariello, Giovanni / Allocca, Luigi | SAE Technical Papers | 2020

    Wall Impingement Process of a Multi-Hole GDI Spray: Experimental and Numerical Investigation

    Montanaro, Alessandro / Alfuso, Salvatore / Malaguti, Simone | SAE Technical Papers | 2012

    Impinging Jets of Fuel on a Heated Surface: Effects of Wall Temperature and Injection Conditions

    Montanaro, Alessandro / Meccariello, Giovanni / Allocca, Luigi et al. | SAE Technical Papers | 2016

    Schlieren and Mie Scattering Imaging System to Evaluate Liquid and Vapor Contours of a Gasoline Spray Impacting on a Heated Wall

    Montanaro, Alessandro / Meccariello, Giovanni / Allocca, Luigi et al. | SAE Technical Papers | 2015

    Spray Characterization of a Single-Hole Gasoline Injector under Flash Boiling Conditions

    Montanaro, Alessandro / Bonandrini, Giovanni / Allocca, Luigi et al. | SAE Technical Papers | 2014

    Outwardly Opening Hollow-Cone Diesel Spray Characterization under Different Ambient Conditions

    Montanaro, Alessandro / Beatrice, Carlo / Allocca, Luigi et al. | SAE Technical Papers | 2018

    Vapor and Liquid Phases of the ECN Spray G Impacting on a Flat Wall at Engine-Like Conditions

    Montanaro, Alessandro / Meccariello, Giovanni / Allocca, Luigi et al. | SAE Technical Papers | 2016

    GDI Spray-Wall Interaction with Numerical Characterization: Wall Temperature Influence

    Montanaro, Alessandro / Allocca, Luigi / Costa, Michela et al. | SAE Technical Papers | 2015

    A “Dynamic System” Approach for the Experimental Characterization of a Multi-Hole Spray

    Montanaro, Alessandro / Amoresano, Amedeo / Langella, Giuseppe et al. | SAE Technical Papers | 2017

    A 3D CFD Simulation of GDI Sprays Accounting for Heat Transfer Effects on Wallfilm Formation

    Montanaro, Alessandro / Piazzullo, Daniele / Allocca, Luigi et al. | SAE Technical Papers | 2017

    Imaging and Vibro-Acoustic Diagnostic Techniques Comparison for a GDI Fuel Injector

    Montanaro, Alessandro / Siano, Daniela / Allocca, Luigi et al. | SAE Technical Papers | 2019

    Dynamic Thermal Behavior of a GDI Spray Impacting on a Heated Thin Foil by Phase-Averaged Infrared Thermography

    Montanaro, Alessandro / Cardone, Gennaro / Allocca, Luigi et al. | SAE Technical Papers | 2019

    Numerical Investigation on GDI Spray under High Injection Pressure up to 100 MPa

    Montanaro, Alessandro / Paredi, Davide / Allocca, Luigi et al. | SAE Technical Papers | 2020

    Measurement of Diesel Spray Formation and Combustion upon Different Nozzle Geometry using Hybrid Imaging Technique

    Montanaro, Alessandro / Zhang, Anqi / Naber, Jeffrey et al. | SAE Technical Papers | 2014

    Transient Heat Transfer Effects on a Gasoline Spray Impact against Hot Surfaces: Experimental and Numerical Study

    Montanaro, Alessandro / Piazzullo, Daniele / Allocca, Luigi et al. | SAE Technical Papers | 2017

    Under-Expanded Jets Characterization by Means of CFD Numerical Simulation Using an Open FOAM Density-Based Solver

    Montanaro, Alessandro / De Vita, Angelo / Duronio, Francesco et al. | SAE Technical Papers | 2021