Synonyme wurden verwendet für: STOFFEIGENSCHAFT
Suche ohne Synonyme: keywords:("STOFFEIGENSCHAFT")

101–150 von 6,285 Ergebnissen
|

    Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper

    SAE Technical Papers | 2017
    Schlagwörter: Materials properties

    Damage of a Hadfield steel crossing due to wheel rolling impact passages

    Guo, S.L. / Sun, D.Y. / Zhang, F.C. et al. | Tema Archiv | 2013
    Schlagwörter: Materialverhalten

    Aluminum Alloy 5083, Plate and Sheet

    SAE Technical Papers | 2012
    Schlagwörter: Materials properties

    Aluminum Alloy 5454, Plate and Sheet

    SAE Technical Papers | 2012
    Schlagwörter: Materials properties

    Asbestos and Synthetic Rubber Sheet, Hot Oil Resistant

    SAE Technical Papers | 2009
    Schlagwörter: Materials properties

    Property and Fiber Orientation Determination for Carbon Fiber Composite

    Zhang, Boyang / Zeng, Danielle / Li, Junrui et al. | SAE Technical Papers | 2018
    Schlagwörter: Materials properties

    Hot Tensile Properties of Shielded Metal Arc Welded Similar and Dissimilar Joint of 9Cr-1Mo Steel and 304 Stainless Steel

    Karthick, K. / Balasubramanian, M. / Prathap, P. et al. | SAE Technical Papers | 2024
    Schlagwörter: Materials properties

    Aluminum Alloy, Sheet and Plate 4.4Mg - 0.70Mn - 0.15Cr (5083-O) Annealed

    SAE Technical Papers | 2023
    Schlagwörter: Materials properties

    Crashworthiness Design of Hierarchical Honeycomb-Filled Structures under Multiple Loading Angles

    Ma, Chao / Xu, Xiang / Gao, Yunkai et al. | SAE Technical Papers | 2020
    Schlagwörter: Materials properties

    Advanced Material Modelling for Failure Prediction of ISOFIX Anchorages

    Sharma, Ankur / van der Loos, Philipp / Kumar, Saket et al. | SAE Technical Papers | 2024
    Schlagwörter: Materials properties

    A Study of High Refinement Simulation Prediction on the CAB Development for FMVSS226 Ejection Mitigation Performance

    Wang, Cheng / Shan, Jinhui / Xue, Lele | SAE Technical Papers | 2022
    Schlagwörter: Materials properties

    Assessing the Characterization for Multiple Cones and Cone Portions Utilizing X-Ray Diffraction in Single Point Incremental Forming

    Forouhandeh, Fariborz / Bhasker, Radhe Shyam / Kumar, Yogesh | SAE Technical Papers | 2023
    Schlagwörter: Materials properties

    Brake Pad Moisture Adsorption and Its Effect on Brake Pad Compression Strain/Modulus and Friction Coefficient: Effect of Pad Cure Temperatures

    Rathee, Aman / Kumar Sharma, Devendra / Rhee, Seong Kwan et al. | SAE Technical Papers | 2023
    Schlagwörter: Materials properties

    Aluminum Beryllium, Preforms Hot Isostatic Pressed and Heat Treated 38Al - 62Be

    SAE Technical Papers | 2023
    Schlagwörter: Materials properties

    Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al - 4V Annealed

    SAE Technical Papers | 2023
    Schlagwörter: Materials properties

    Webbing, Woven Nylon For Decelerators 1 (25) Wide, 9000 (40,000) Breaking Strength

    SAE Technical Papers | 2016
    Schlagwörter: Materials properties

    Webbing, Woven Nylon For Decelerators 1-23/32 (43) Wide, 8700 (38,700) Breaking Strength

    SAE Technical Papers | 2016
    Schlagwörter: Materials properties

    Effects of Temperature on Mechanical Response of Lithium Ion Batteries to External Abusive Loads

    Sahraei, Elham / Gilaki, Mehdi | SAE Technical Papers | 2019
    Schlagwörter: Materials properties

    Titanium Alloy, Cold Rolled Sheet and Strip 15V - 3Al - 3Cr - 3Sn Solution Heat Treated

    SAE Technical Papers | 2022
    Schlagwörter: Materials properties

    The Impact of Modification on the Stability of Catalysts for Oxygen Reduction Reaction

    Zhou, Lu / Liu, Mingtao / Wang, Qian et al. | SAE Technical Papers | 2022
    Schlagwörter: Materials properties

    Effect of Weld Speed on Joint Quality of Nd: YAG Laser Welded Inconel 718 Alloy Weldments

    Thejasree, P / Krishnamachary, P.C | SAE Technical Papers | 2021
    Schlagwörter: Materials properties

    Sleeving, Identification, Heat Shrinkable, General Specification

    SAE Technical Papers | 2022
    Schlagwörter: Materials properties

    Deicing/Anti-Icing Fluid, Aircraft SAE Type I Glycol (Conventional and Non-Conventional) Based

    SAE Technical Papers | 2016
    Schlagwörter: Materials properties

    Effect of Thermal Conditions on Fatigue Resistance of One Automotive Day Time Running Light Housing Made of Polycarbonate Material

    Ediz, Barış / Aktaş, Mehmet | SAE Technical Papers | 2021
    Schlagwörter: Materials properties

    Seventh-Order Polynomial Constituting the Exact Buckling Mode of a Functionally Graded Column

    Elishakoff, Isaac / Padilla, Jonathan / Mera, Youkendy et al. | AIAA | 2021
    Schlagwörter: Material Properties

    Deicing/Anti-Icing Fluid, Aircraft SAE Type I Non-Glycol Based

    SAE Technical Papers | 2016
    Schlagwörter: Materials properties

    Evidence-Based Fuzzy Approach for the Safety Analysis of Uncertain Systems

    Rao, S. S. / Annamdas, Kiran Kumar | AIAA | 2008
    Schlagwörter: Material Properties

    TUBING, PLASTIC, EXTRA FLEXIBLE, CONVOLUTED, HELICAL, PERFLUOROALKOXY (PFA) CLOSE CONVOLUTION

    SAE Technical Papers | 2021
    Schlagwörter: Materials properties

    Tubing, Plastic, Flexible, Convoluted, Ethylene-Tetrafluoroethylene, Standard Convolution

    SAE Technical Papers | 2011
    Schlagwörter: Materials properties

    Characterization of Friction Stir Processed Aluminum-Graphene Nanoplatelets Composites

    Varaprasad, K.C. / Prakash, P. Bhanu / Krishnamachary, P.C. | SAE Technical Papers | 2020
    Schlagwörter: Materials properties

    Spark Arrester Test Carbon

    SAE Technical Papers | 2020
    Schlagwörter: Materials properties

    Luminous Reflectance in Safety Glazing Materials for Road Vehicles

    SAE Technical Papers | 2020
    Schlagwörter: Materials properties

    Aluminum Alloy 5456, Plate and Sheet

    SAE Technical Papers | 2012
    Schlagwörter: Materials properties

    Tubing, Plastic, Extra Flexible, Convoluted, Fluorinated Ethylene Propylene, Close Convolution

    SAE Technical Papers | 2011
    Schlagwörter: Materials properties

    Steel Bars, Forgings, and Tubing, Free-Cutting, 1.5Mn - 0.25Pb (0.32-0.39C) (11L37)

    SAE Technical Papers | 2008
    Schlagwörter: Materials properties

    Insulation Sleeving, Electrical, Heat Shrinkable, Polyethylene Terephthalate, Non-Crosslinked

    SAE Technical Papers | 2018
    Schlagwörter: Materials properties

    Alcohol, Denatured Ethyl

    SAE Technical Papers | 2009
    Schlagwörter: Materials properties

    Aluminum Pigment Paste

    SAE Technical Papers | 2008
    Schlagwörter: Materials properties

    Fluid, Aircraft Deicing/Anti-Icing, SAE Type I

    SAE Technical Papers | 2018
    Schlagwörter: Materials properties

    Insulation Sleeving, Electrical, Heat Shrinkable, Silicone Rubber, Flexible

    SAE Technical Papers | 2018
    Schlagwörter: Materials properties

    Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible

    SAE Technical Papers | 2018
    Schlagwörter: Materials properties

    Test and Precision Analysis of Ranging of Reflectorless Total Station

    Zhao, Ya-Hong / Xue, Hai-Tao / Zhang, Li-Hua | Tema Archiv | 2012
    Schlagwörter: Materialeigenschaft