Synonyme wurden verwendet für: Additiv
Suche ohne Synonyme: keywords:("Additiv")

1–50 von 1,983 Ergebnissen
|

    Referenz-Materialien zur Prüfung der Affinität von Bitumen und Gesteinskörnung : Forschungsprojekt VSS 2015/311 auf Antrag des Schweizerischen Verbandes der Strassen- und Verkehrsfachleute (VSS)

    Freier Zugriff
    Referenz-Materialien zur Prüfung der Affinität von Bitumen und Gesteinskörnung, Projekt | TIBKAT | 2020
    Schlagwörter: Zuschlagstoff (Bauwesen)

    Kriterien für die Dauerhaftigkeit von Asphaltschichten - Untersuchungen zur Ansprache des Haftverhaltens

    Freier Zugriff
    Radenberg, Martin / Twer, Dominik / Louis, Hans-Peter et al. | TIBKAT | 2021
    Schlagwörter: Zuschlagstoff (Bauwesen)

    New advances in rheological performance in high solids marine and protective coatings

    Hennessy, Tony | Tema Archiv | 2014
    Schlagwörter: thixotroper Zusatzstoff , Zusatzstoff

    Analyse des gefügeabhängigen Löslichkeitsverhaltens potenziell AKR-empfindlicher Gesteinskörnungen

    Freier Zugriff
    Weise, Frank / Oesch, Tyler / Wilsch, Gerd et al. | TIBKAT | 2021
    Schlagwörter: Zuschlagstoff (Bauwesen)

    11th Annual Symposium on Aggregates - Asphalt Concrete, Bases and Fines 2003 : Austin, Texas, USA, 27 - 30 April 2003

    International Center for Aggregates Research, Austin, Tex. | TIBKAT | 2012
    Schlagwörter: Zuschlagstoff (Bauwesen)

    Fuel Additives for Reduction of Internal Diesel Injectors Deposits (IDID, “lacquering”): A Critical and Priority Route

    Dequenne, Bernard / Rodeschini, Helene / Lopes, Manuel et al. | SAE Technical Papers | 2012
    Schlagwörter: Fuel additives

    Use of wastewater sludge for base and subbase of road pavements

    Lucena, Lêda Christiane de Figueirêdo Lopes / Juca, José Fernando Thomé / Soares, Jorge Barbosa et al. | Elsevier | 2014
    Schlagwörter: Additives

    Frictional and Wear Properties of Diamond-Like Carbon Films with Lubricant Additives

    Miyake, Koji / Kasai, Moritsugu / Honda, Tomomi | SAE Technical Papers | 2023
    Schlagwörter: Lubricant additives

    A review of the performance and structural considerations of paraffin wax hybrid rocket fuels with additives

    Veale, Kirsty / Adali, Sarp / Pitot, Jean et al. | Elsevier | 2017
    Schlagwörter: Additives

    Minimizing Diesel Particulate Filter Incombustibles by Using Ultra Low Ash - Zero Phosphorus Oil

    Boffa, Alex / Walker, Andrew / McGeehan, James A. et al. | SAE Technical Papers | 2014
    Schlagwörter: Lubricant additives

    Combined Fuel and Lubricant Effects on Low Speed Pre-Ignition

    Anderson, Garrett / Kocsis, Michael Clifford / Briggs, Thomas | SAE Technical Papers | 2018
    Schlagwörter: Lubricant additives

    Characteristics and Effects of Ash Accumulation on Diesel Particulate Filter Performance: Rapidly Aged and Field Aged Results

    Sappok, Alexander / Santiago, Michael / Vianna, Tomas et al. | SAE Technical Papers | 2009
    Schlagwörter: Lubricant additives

    Risk of concrete carbonation with mineral industrial by-products

    Czarnecki, Lech / Woyciechowski, Piotr / Adamczewski, Grzegorz | Springer Verlag | 2017
    Schlagwörter: mineral additives

      Risk of concrete carbonation with mineral industrial by-products

      Czarnecki, Lech / Woyciechowski, Piotr / Adamczewski, Grzegorz | Online Contents | 2018
      Schlagwörter: mineral additives

    A review of lubricating grease used in European railway

    Mittertreiner, Peter-Paul | IuD Bahn | 2003
    Schlagwörter: Zuschlagstoff

    Structural Optimization of printed structures by self-organizied relaxation

    Freier Zugriff
    Zocca, Andrea / Gomes, Cynthia / Linow, Ulf et al. | Deutsches Zentrum für Luft- und Raumfahrt (DLR) | 2016
    Schlagwörter: Additive manufacturing

    Aggregate and material tests and properties related to performance

    National Research Council, Transportation Research Board, USA | TIBKAT | 1996
    Schlagwörter: Zuschlagstoff (Bauwesen)

    New Perspectives on Lubricant Additive Corrosion: Comparison of Methods and Metallurgy

    Hunt, Gregory | SAE Technical Papers | 2018
    Schlagwörter: Lubricant additives

    Effect of ZrO2-Al2O3 and SiC Coating on Diesel Engine to Study the Combustion and Emission Characteristics

    Saravanan, C. G. / Ramu, P. | SAE Technical Papers | 2009
    Schlagwörter: Fuel additives

    The Effects of Diesel Fuel Additives on Water Separation Performance

    Bessee, Gary / Hutzler, Scott | SAE Technical Papers | 2009
    Schlagwörter: Fuel additives

    Evaluation of Gasoline Additive Packages to Assess Their Ability to Clean Up Intake Valve Deposits in Automotive Engines

    Shoffner, Brent / Nelson, Edward / Reitz, Jannik et al. | SAE Technical Papers | 2019
    Schlagwörter: Fuel additives

    Effect of Low Viscosity Passenger Car Motor Oils on Fuel Economy Engine Tests

    Sims, Carrie B. / Parsons, Gary / Sztenderowicz, Mark et al. | SAE Technical Papers | 2013
    Schlagwörter: Lubricant additives

    Internal Boundaries of Metal Additive Manufacturing: Future Process Selection

    Slattery, Kevin / Rogers, Kirk A. | SAE Technical Papers | 2022
    Schlagwörter: Additive manufacturing

    Driving safety assessment for ride-hailing drivers

    Mao, Huiying / Deng, Xinwei / Jiang, Honggang et al. | Elsevier | 2020
    Schlagwörter: General additive models , SHapley Additive exPlanation

    Selective Laser Melting of a 1U CubeSat structure. Design for Additive Manufacturing and assembly

    Boschetto, Alberto / Bottini, Luana / Eugeni, Marco et al. | Elsevier | 2019
    Schlagwörter: Additive manufacturing , Design for additive manufacturing

    Investigation of Injector Tip Deposits on Transport Refrigeration Units Running on Biodiesel Fuel

    Sem, Thomas R. | SAE Technical Papers | 2004
    Schlagwörter: Fuel additives

    Investigations into Fuel Additive Induced Power Gain in the CEC F-98-08 DW10B Injector Fouling Engine Test

    Panesar, Avtar / Quigley, Robert / Barbour, Robert H. | SAE Technical Papers | 2014
    Schlagwörter: Fuel additives

    Fuel-Lubricant Interactions on the Propensity for Stochastic Pre-Ignition

    Zigler, Bradley / Kaul, Brian / Splitter, Derek et al. | SAE Technical Papers | 2019
    Schlagwörter: Lubricant additives

    Effects of High Boiling Point Fuel Additives on Deposits in a Direct Injection Gasoline Engine

    Nakata, Koichi / Kitano, Koji / Yokoo, Nozomi et al. | SAE Technical Papers | 2017
    Schlagwörter: Fuel additives

    Utilisation of waste plastic in bituminous mix for improved performance of roads

    Jafar, Jalal J. | Springer Verlag | 2016
    Schlagwörter: chemical additives

      Utilisation of waste plastic in bituminous mix for improved performance of roads

      Jafar, Jalal J. | Online Contents | 2016
      Schlagwörter: chemical additives

    Preliminary results from six vehicle, heavy duty truck trial, using additive regenerated DPFs

    Richards, P. / Rogers, T. | Tema Archiv | 2002
    Schlagwörter: Zusatzmittel , Regenerations-Additive

    Experimental Investigation on Effect of Nano Fluids in the Behaviour of a Compression Ignition Engine Fueled with Diesel Biofuel Blends

    Mayakrishnan, Jaikumar / Nandagopal, Sasikumar / Masimalai, Senthil Kumar | SAE Technical Papers | 2018
    Schlagwörter: Fuel additives

    Additive Manufacturing Using Lunar Regolith in a Dirty Vacuum

    Parker Shake | NTRS
    Schlagwörter: Additive Manufacturing

      Additive Manufacturing Using Lunar Regolith in a Dirty Vacuum

      Parker Shake | NTRS
      Schlagwörter: Additive Manufacturing

    Additively Manufactured VIPER Wheel Study

    Richard Hagen / Alex Sobey / Brian Gibson | NTRS
    Schlagwörter: Additive Manufacturing

    NASA Adaption for Pandemic Response National Pandemic Response Team

    Brian Michael West | NTRS
    Schlagwörter: Additive Manufacturing

    Interaction Between Fuel Additive and Oil Contaminant: (II) Its Impact on Fuel Stability and Filter Plugging Mechanism

    Stehouwer, David M. / Fang, Howard L. / Wang, Jerry C. | SAE Technical Papers | 2003
    Schlagwörter: Fuel additives , Lubricant additives

    Study of Ether Group Effects on Physicochemical Properties of Cottonseed Oil Ether Monoesters as Novel Biodiesels

    Su, Bin / Guo, Hejun / Su, Junzuo et al. | SAE Technical Papers | 2013
    Schlagwörter: Fuel additives

    Investigation and Analysis of Wear in a 3.6L V6 Gasoline Engine: Phase I - Use of Radioactive Tracer Technology

    Wileman, Craig / Nelson, Edward / Hansen, Gregory et al. | SAE Technical Papers | 2017
    Schlagwörter: Fuel additives

    Acid Neutralization and Engine Hardware Corrosion Protection through Heavy-Duty Diesel Lubricant Additive Chemistry

    Frampton, Catherine / Diggs, Nancy / Lin, Wangkan | SAE Technical Papers | 2016
    Schlagwörter: Lubricant additives

    Demonstration of Fuel Economy Benefit of Friction Modifier Additives via Fuel-to-Lubricant Transfer in Euro-5 Gasoline Fleet

    Felix-Moore, Alison / Buttery, Ian / Ziman, Pauline et al. | SAE Technical Papers | 2013
    Schlagwörter: Fuel additives , Lubricant additives

    Effect of Accelerated Aging Rate on the Capture of Fuel-Borne Metal Impurities by Emissions Control Devices

    Williams, Aaron / Xie, Chao / Lance, Michael et al. | SAE Technical Papers | 2014
    Schlagwörter: Lubricant additives

    Research on the Tribological Properties of Layered Kaolin Lubricant Additives

    Chang, Jian / Zhang, Li / Song, Shaoze et al. | SAE Technical Papers | 2023
    Schlagwörter: Lubricant additives

    Effect of Oil Additives and Fuel Concentration in Lubricating Oil on Abnormal Combustion of Supercharged SI Engine

    Tanaka, Junya / Nakayama, Yota | SAE Technical Papers | 2022
    Schlagwörter: Lubricant additives

    Design Analysis of High Power Density Additively Manufactured Induction Motor

    Wawrzyniak, Beata I. / Tangudu, Jagadeesh | SAE Technical Papers | 2016
    Schlagwörter: Additive manufacturing