1–5 von 5 Ergebnissen
|

    A new design method for piping components against leakage and damage subjected to high level earthquake load

    Ando, F. / Sawa, T. / Ikeda, M. | Tema Archiv | 2002
    failure modes and degree of safety. The failure modes for each piping component is classified according to the past damage experience due to ...

    An advanced computational method for nonlinear behavior of piping systems subject to earthquake load

    Mukaimachi, N. / Ando, F. / Ikeda, M. | Tema Archiv | 2002
    With regard to piping systems of industrial facilities, sometimes they are subject to large deformation with high local plasticity. This ...

    Application of semi-active oil damper system to base isolation systems

    Kawai, T. / Tsuyuki, Y. / Inoue, Y. et al. | Tema Archiv | 2002
    natural frequency is 0.33 Hz of this system. Two Semi-Active Oil Damper were installed in the model and excited the table for one horizontal ...

    Sizing stress corrosion cracking in natural gas pipelines using phased array ultrasound

    Spanner, J. / Selby, G. | Tema Archiv | 2002
    detect and measure the length of the cracks, but cannot measure through wall depths. In some cases it would be desirable to excavate down to a ...

    Guided wave resonance tuning for pipe inspection

    Barshinger, J. / Rose, J.L. / Avioli, M.J. jun. | Tema Archiv | 2002
    industries. Relatively long lengths of piping can be inspected for corrosion and cracking from a single probe position. This saves a great deal of ...