1–18 von 18 Ergebnissen
|

    Closed-form stress intensity factor solutions for spot welds in various types of specimens

    Lin,P.C. / Pan,J. / National Chung Cheng Univ.,TW et al. | Kraftfahrwesen | 2008

    Determination of assembly stresses in aluminium knuckels

    Taylor,D. / Esmen,E. / Pan,J. et al. | Kraftfahrwesen | 1999

    Elastic-plastic indentation and flat plate rolling under plane strain conditions

    Ali,M.Y. / Pan,J. / Univ.of Michigan,Ann Arbor,US | Kraftfahrwesen | 2011

    Failure mechanisms of sandwich specimens with epoxy foam cores under bending conditions

    Pan,J. / Chien,W.Y. / Pan,T. et al. | Kraftfahrwesen | 2003

    Failure of laser welds in aluminum sheets

    Chien,W.Y. / Pan,J. / Friedman,P.A. et al. | Kraftfahrwesen | 2001

    Failure prediction of sheet metals based on an anisotropic Gurson model

    Huang,H. / Pan,J. / Tang,S. et al. | Kraftfahrwesen | 2000

    Fatigue behaviors of aluminum 5754-O spot friction welds in lap-shear specimens

    Tran,V.X. / Pan,J. / Pan,T.Y. et al. | Kraftfahrwesen | 2008

    Fatigue crack initiation in threaded fasteners using the critical plane approach

    Taylor,D.S. / Pan,J. / Univ.of Michigan,Ann Arbor,US | Kraftfahrwesen | 2003

    Influence of shear loads on crush of honeycomb materials

    Hong,S.T. / Pan,J. / Tyan,T. et al. | Kraftfahrwesen | 2002

    Spot weld failure loads under combined mode loading conditions

    Pan,J. / Wu,S. / Tyan,T. et al. | Kraftfahrwesen | 2001

    Stress intensity factors for kinked cracks near spot welds in lap-shear specimens

    Wang,D.A. / Pan,J. / Da-Yeh Univ.,CN et al. | Kraftfahrwesen | 2005

    Theoretical framework for modeling spot welds under various types of loading conditions

    Lin,P.C. / Pan,J. / National Chung Cheng Univ.,TW et al. | Kraftfahrwesen | 2008