1–44 von 44 Ergebnissen
|

    Fatigue Behavior of Long and Short Glass Reinforced Thermoplastics

    Grove, D. / Kim, H. | SAE Technical Papers | 1995

    Modeling Early Injection Processes in HSDI Diesel Engines

    Kim, Manshik / Reitz, Rolf D. / Kong, Song-Charng | SAE Technical Papers | 2006

    Application of Micro-Genetic Algorithms for the Optimization of Injection Strategies in a Heavy-Duty Diesel Engine

    Kim, Manshik / Liechty, Mike P. / Reitz, Rolf D. | SAE Technical Papers | 2005

    The Influence of Fuel Filter Design on the Low Temperature Performance of Light Duty Diesel Vehicles

    Sheen, D.-H. / Yang, D.-J. / Kim, H.-S. et al. | SAE Technical Papers | 2002

    Transient Heat Transfer Experiment in Subcooled Liquid Nitrogen

    Kim, D. / Jeong, S. | SAE Technical Papers | 1999

    Modeling Combustion and Emissions of HSDI Diesel Engines Using Injectors with Different Included Spray Angles

    Kim, Hoojoong / Reitz, Rolf D. / Kong, Song-Charng | SAE Technical Papers | 2006

    Numerical Study on Ignition and Combustion Process of a Diesel Spray in EGR Environment

    Kim, H. J. / Kim, S. W. / Kwon, Y. D. et al. | SAE Technical Papers | 1996

    Aerodynamics of a Generic Ground Transportation System: Detached Eddy Simulation

    Sovani, Sandeep D. / Kim, Sung Eun / Unaune, Sunil V. | SAE Technical Papers | 2005

    Downgauging with High Performance, Filled RIM Polymers-Lowering Fascia Cost and Improving Quality

    Schrott, Bruce D. / Bennett, Kim F. | SAE Technical Papers | 1992

    Engine Friction Reduction Through Liner Rotation

    Dardalis, Dimitrios / Kim, Myoungjin / Matthews, Ronald D. et al. | SAE Technical Papers | 2005

    Improving Heavy-Duty Engine Efficiency and Durability: The Rotating Liner Engine

    Dardalis, Dimitrios / Kim, Myoungjin / Matthews, Ronald D. et al. | SAE Technical Papers | 2005

    Development of a CAE Method for Predicting Vehicle Launch Performance with Various VCT Strategies

    Curtis, Eric W. / Ku, Kim Hwe / Kuechler, Peter D. et al. | SAE Technical Papers | 2018

    The Effects of Mixture Stratification on Combustion in a Constant-Volume Combustion Vessel

    Ghandhi, J. B. / Plackmann, J. D. / Kim, T. | SAE Technical Papers | 1998

    Fatigue Strength Improvement of Low Carbon Steel Resistance Spot Welds by the StressWave™ Process

    Flinn, B. D. / Kim, D. / Easterbrook, E. T. et al. | SAE Technical Papers | 2005

    Synchrothermal Reactor System for Control of Automotive Exhaust Emissions

    Kraus, B. J. / Kim, D. S. / Glass, W. | SAE Technical Papers | 1970

    The Cold Cranking Simulator Method for Viscosity of Motor Oils at Low Temperature

    Kim, D. S. / Cox, David B. / Manning, Robert E. | SAE Technical Papers | 1968

    On Predicting Aeroacoustic Performance of Ducts with Broadband Noise Source Models

    Khondge, Ashok D. / Farag, Ashraf A. / Sovani, Sandeep D. et al. | SAE Technical Papers | 2005

    Flow Visualization within a Capillary Evaporator

    Ku, Jentung / Herold, Keith / Kolos, Kim et al. | SAE Technical Papers | 1993

    Ethylene/α-olefin Copolymers for Automotive Interiors

    Pomije, John D. / Walton, Kim L. / Clayfield, Tim | SAE Technical Papers | 2000

    SmartPulley: Web-based Design Support System for Automotive Steel Pulley

    Chun, D. M. / Lee, G. B. / Kim, H. J. et al. | SAE Technical Papers | 2006

    Design of Network Based On-Board Computer System

    Cho, C-H / Park, D-Y / Lee, J-D et al. | SAE Technical Papers | 2001

    In-Mold Cure Monitoring of Phenolic Molding Materials

    Shepard, David D. / Smith, Kim R. / Landi, Vincent R. | SAE Technical Papers | 1998

    The Effects of Charge Motion on Early Flame Kernel Development

    Lord, David L. / Brehob, Diana D. / Anderson, Richard W. et al. | SAE Technical Papers | 1993

    A Study on the Dynamic Characteristics of an Epicyclic Gear Train with Journal Bearing

    Han, D. C. / Lee, D. H. / Cheon, G. J. et al. | SAE Technical Papers | 1999

    Dynamic Model of a Springless Electrohydraulic Valvetrain

    Kim, Dean H. / Anderson, Mark D. / Levin, Michael B. et al. | SAE Technical Papers | 1997

    Optimizing the Performance of a 50cc Compression Ignition Two-Stroke Engine Operating on Dimethyl Ether

    Hansson, Christoffer / Nielsen, Claus S. / Dolriis, Jakob D. et al. | SAE Technical Papers | 2011

    Multiobjective Optimization of Hybrid Regenerative Life Support Technologies

    Sourlas, D. / Kim, H. / Choi, J. et al. | SAE Technical Papers | 1995

    Development of Structure-Occupant Integrated Analysis Method

    Yoon, D. Y / Cho, H. S. / Kim, H. S. et al. | SAE Technical Papers | 1995

    Validation of a FEA Tire Model for Vehicle Dynamic Analysis and Full Vehicle Real Time Proving Ground Simulations

    Farahani, Akbar D. / Lee, Chang-Ro / Kim, Jeong-Won et al. | SAE Technical Papers | 1997

    The Rolling Contact Fatigue Behavior of Nb and B Added Microalloyed Forging Steels

    Song, B. H. / Son, C. H. / Park, C. N. et al. | SAE Technical Papers | 2005

    Three-Dimensional Simulations of Automotive Catalytic Converter Internal Flow

    Cheng, C.-Y. / Chui, G. / Pakko, J. D. et al. | SAE Technical Papers | 1991

    Design and Instrumentation of a Vehicle Driving Simulator

    Song, C. S. / Bae, D. S. / Song, J. K. et al. | SAE Technical Papers | 1995

    Automatic Climate Control of the Recreation Vehicle with Dual HVAC System

    Shin, D. W. / Kwon, G. S. / Jang, G. Y. et al. | SAE Technical Papers | 2001

    New York State Hybrid Electric TRU Demonstration Projects

    Roy, Bryan E. / Kim, Jeffrey C. / Tario, Joseph D. et al. | SAE Technical Papers | 2009

    Reliability Verification of Computer Based Control and Diagnosis Algorithm

    Park, D-Y / Lee, J-H / Jeon, J-W et al. | SAE Technical Papers | 2001

    Collaborative Engineering Methods for Radiation Shield Design

    Johns, B. D. / Cucinotta, F. A. / Badavi, F. F. et al. | SAE Technical Papers | 2001