Synonyme wurden verwendet für: Chemistry
Suche ohne Synonyme: International Journal of New Chemistry

1–50 von 355 Ergebnissen
|

    Model test of new floating offshore wind turbine platforms

    Shin, Hyunkyoung / Dam, Pham Thanh / Jung, Kwang-Jin et al. | Tema Archiv | 2013
    This paper presents the model test results of 3 new spar platforms which were developed based on the OC3-Hywind spar to support a 5-MW wind ...

    Ceramic matrix composite material in highly loaded journal bearings

    Leuchs, M. / Muhlratzer, A. | Tema Archiv | 2002
    Examples of ceramic matrix composite (CMC) used in highly loaded journal bearings of pumps, in high temperature bearings for space re-entry ...

    On a new crush trigger for energy absorption of composite tubes

    Huang, Jiancheng / Wang, Xinwei | Tema Archiv | 2010
    A new crush trigger, called crown trigger, is introduced at one end of carbon-fibre-reinforced polymer circular tubes. Quasi-static ...

    Exploratory environmental impact assessment of the manufacturing and disposal stages of a new PEM fuel cell

    Garrain, Daniel / Lechon, Yolanda | Tema Archiv | 2014
    This study presents an Exploratory Environmental Impact Assessment (EEIA) of the manufacturing process of a Polymer Electrolyte Membrane ...

    A new rotary tribometer to study the wear of reinforced rubber materials

    Mane, Z. / Loubet, J.L. / Guerret, C. et al. | Tema Archiv | 2013
    A rotary tribometer has been developed in order to reproduce abrasion wear at the interface between the reinforced rubber material of a ...

    Medium speed engine development. Impact of new emission regulations

    Schlemmer-Kelling, Udo | Tema Archiv | 2008
    Initiativen (Markenzeichen für saubere Schiffe, reduzierte Hafenegebühren). Die IMO (International Maritime Organization) begrenzt seit 2000 in Stufen ...

    Noise control design of railway vehicles - impact of new legislation

    Frid, A. / Leth, S. / Högström, C. et al. | Tema Archiv | 2006
    the two is crucial to achieve further progress beyond the introduction of composite blocks for freight wagons. This is well-known to be the ...

    Study of friction and wear in the wheel-rail system by X-ray electron and auger-electron spectroscopy and quantum chemistry

    Kolesnikov, V.I. / Kozakov, A.T. / Migal, Y.F. | Tema Archiv | 2010
    metals, representing a new type of additive to lubricants, is studied. The results obtained show XES (X-ray electron spectroscopy), AES (Auger ...

    A new measuring method of wheel-rail contact forces and related considerations

    Matsumoto, Akira / Sato, Yasuhiro / Ohno, Hiroyuki et al. | Tema Archiv | 2008
    Measurement of wheel-rail contact forces is very important, but it is not executed so often because of its difficulties. A new measuring ...

    New methodology for the design of ultra-light structural components for machine tools

    Bustillo, Andres / Oleaga, Ibone / Zulaika, Juan J. et al. | Tema Archiv | 2015
    new methodology to overcome such limitations, which involves the design of machine tools with ultra-light structural components, and the ...

    New methods for impact assessment of biotic-resource depletion in life cycle assessment of fisheries: theory and application

    Langlois, Juliette / Freon, Pierre / Delgenes, Jean-Philippe et al. | Tema Archiv | 2014
    It is difficult to address all of the direct environmental impacts of fisheries using conventional methods of Life Cycle Assessment (LCA ...

    A new approach to utilize hydrogen as a safe fuel

    Abdel-Aal, H.K. / Sadik, M. / Bassyouni, M. et al. | Tema Archiv | 2005
    32 % less than methane gas. In this paper, the problem of 'safe hydrogen' is tackled using a new theoretical approach. Hydrogen is mixed with ...

    Exploring innovation in the automotive industry: New technologies for cleaner cars

    Zapata, Clovis / Nieuwenhuis, Paul | Tema Archiv | 2010
    The concept of innovation has been used in a wide range of contexts and the theoretical development has proven to be extremely valuable to ...

    New theories of the A-axis growth of ice crystals

    Simpson, H. / Beggs, G. / Deans, J. | Tema Archiv | 1975

    New titanium alloys

    Tema Archiv | 1989

    New method uses hardness to find yield strength

    Radmard, Shadie / Berg, Monique | Tema Archiv | 2011
    der Rohrleitungshärte vorgestellt. Diese Methode liefert statistisch sicherere Ergebnisse als in CFR (Code of Federal Regulations) Title 49 ...

    Development of a new rheology forming process with a vertical-type sleeve with electromagnetic stirring

    Kang, C.G. / Lee, S.M. | Tema Archiv | 2008
    demonstrated and adapted to the forming processes used to manufacture aluminum alloy engineering components such as knuckles. After using the new ...

    Here's a roundup of new SMCS that are well worth checking out

    Brownbill, D. | Tema Archiv | 1986
    Pressens, Beschichtens, Einfaerbens. Einsatz bei Kraftfahrzeugen, Kuechen- und Badartikeln, Chemie- und Offshore-Oelfoerderungsanlagen. Hersteller ...

    Application of high strength microalloyed steel in a new automotive crankshaft

    Young Sang Ko / Park, Jin-Woo / Park, Hyounsoo et al. | Tema Archiv | 2006
    Applications of steels for new forged automotive components require a complete understanding of material properties and design requirements ...

    New application of seawater and electrolyzed seawater in air pollution control of marine diesel engine

    An, S. / Nishida, O. | Tema Archiv | 2003
    It is the purpose of this paper to introduce the usage of seawater and its electrolysis for the exhaust emission control in marine diesel ...

    A new mechanical-electrical approach to the wheel-rail contact

    Descartes, S. / Renouf, M. / Fillot, N. et al. | Tema Archiv | 2008
    The need to understand the short-circuit phenomenon between two rails brought into contact by a train has led to a new mechanical ...

    A new method of strength calculation and lifetime prediction of pipe bends operating in the creep range

    Weber, Jochen / Klenk, A. / Rieke, M. | Tema Archiv | 2005
    new algorithm is based on a Finite-Element parameter study comprising approximately 200 pipe bends. The creep behaviour of the materials ...

    Issues on the mean stress effect in fretting fatigue of a 7050-T7451 Al alloy posed by new experimental data

    Rossino, L.S. / Castro, F.C. / Bose Filho, W.W. et al. | Tema Archiv | 2009
    The aims of this work are: (i) to produce new experimental data for fretting fatigue considering the presence of a mean bulk stress and (ii ...

    Numerical simulations of tyre/soil interaction using geomaterial properties characterised with a new calibration method

    Chou, Clifford C. / Zhu, Feng / Skelton, Paul et al. | Tema Archiv | 2011
    are determined using a new calibration method with an improved uniaxial strain compression test. Parameters of MAT-005 in LS-DYNA were ...

    The NHS under new management

    Philip Strong and Jane Robinson. Open University Press (1990). Price £10.99 paperback, £27.50 hardback. ISBN 0-335-09295-0
    Ph.D., B.Sc.(Hons), F.R.C.N. Sines, David | Elsevier | 1993

    A new experimental device to investigate creep forces between wheel and rail

    Doi, Hisayo / Miyamoto, Takefumi / Nishiyama, Yukio et al. | Tema Archiv | 2011
    A new experimental device has been produced in order to investigate creep force characteristics between wheels and rails. The device ...

    Structural reliability of a Suezmax oil tanker designed according to new common structural rules

    Soares, C.Guedes / Parunov, Josko | Tema Archiv | 2008
    with new CSR (Common Structural Rules ) requirement for ultimate vertical bending moment capacity. The probability of structural failure is ...

    A new design approach to the use of composite materials for heavy transport vehicles

    Ingrassia, Tommaso / Alaimo, Gianluca / Cappello, Francesco et al. | Tema Archiv | 2007
    materials to use, is an important aspect that can identify a new concept or way of thinking about a product. This paper presents how to make use of ...

    A New Calculation Method for Belleville Disc Springs with Contact Flats and Reduced Thickness

    Ferrari, Giammarco | Tema Archiv | 2013
    software developed during this study shows how it is possible to create a new type of standard tables for this kind of springs. ...

    Evaluation of a new quadrilateral thin plate bending element

    Batoz, J.L. / Tahar, M.B. | Tema Archiv | 1982

    Potential in New Zealand for use of hydrogen as a transportation fuel

    Kruger, P. / Blakeley, J. / Leaver, J. | Tema Archiv | 2003

    Multi-tasking machines: a new approach to increase the productivity of aircraft components manufacture

    Selvaraj, P. / Thirumal, E. / Radhakrishnan, P. | Tema Archiv | 2006
    , etc. in multiple setups. Increase in tolerance stackup, large in-process inventory, requirements of several jigs and fixtures and large cycle ...

    New structural materials for space applications

    Eaton, D.C.G. / Pradier, A. / Lambert, M. | Tema Archiv | 1991

    ALABC-new directions (Pb-acid batteries)

    Cole, J.F. / Moseley, P.T. | Tema Archiv | 2000
    , the purpose of the Consortium's R&D program has been to advance the performance of the valve-regulated lead-acid battery in support of the new ...

    Development of damper for new electronically controlled power steering system by magnetorheological fluid: MRSTEER

    Park, Y. / Jung, B. | Tema Archiv | 2003
    Electronically controlled power steering (ECPS) device is one of the new power steering systems with improved stability in high-speed ...

    Development of a new procedure for the wheel-rail contact force evaluation in simulations of railway dynamics

    Braccesi, C. / Cianetti, F. / Scaletta, R. | Tema Archiv | 2005
    The numerical solution of the dynamics of a railway vehicle interacting with supporting structures is facilitated by mathematical models ...

    New resin systems for high performance top coats

    Okude, Y. / Ishikura, S. | Tema Archiv | 1995
    anhydride and alcohol because of the polymer effect. Under heating, recyclization of the half ester to anhydride occured. This was examined with ...

    New measuring methods for wheelset angle of attack of railway vehicle on curves

    Miyamoto, M. / Fujimoto, H. / Okabe, T. et al. | Tema Archiv | 1994

    ATMOSAT, a new measurement platform for air quality monitoring

    Heinsheimer, T.F. | Tema Archiv | 1977
    chemical measurements en route. The use of new high strength fabrics allows the construction of a balloon that contains its lifting gas (helium ...

    New test facility for sand erosion studies

    Lemistre, M. / Soulevant, D. / Micheli, F. et al. | Tema Archiv | 1999
    Erosion by sand of aircraft and rotorcraft engines being a real problem, ONERA has developed a test facility to reproduce and analyse in ...

    Development of a new-type high-adhesion control for electric rolling stock

    Kasai, S. / Hirotsu, T. / Yamaguchi, H. et al. | Tema Archiv | 1989

    New computational mechanics for ships and offshore engineering from construction stage to structural collapse stage

    Ueda, Yukio | Tema Archiv | 2007
    Method). These new computational methods form an essential basis for the idea of design by analysis and production planning based on ...

    Future air quality in Danish cities due to new emission and fuel quality directives of the European Union

    Jensen, S.S. / Berkowicz, R. / Winther, M. et al. | Tema Archiv | 2001
    The impact of new European Union (EU) vehicle emission and fuel quality directives on the future air quality in Danish cities has been ...

    Properties of new organic-silicate composite coated steel sheet (EZN-UCII) for automotive body panels

    Yamashita, M. / Kubota, T. / Yoshimi, N. et al. | Tema Archiv | 1991

    A new time domain parametric dynamic system identification approach to multiaxial service load simulation testing in components

    Raath, A.D. | Tema Archiv | 1997
    utilizes parametric dynamic system identification methods. A practical case study example is also discussed to motivate use of this new method ...