Synonyme wurden verwendet für: additive Fertigung
Suche ohne Synonyme: keywords:("additive Fertigung")

251–300 von 1,409 Ergebnissen
|

    Ein zielsystemidentischer Ansatz für das domänenspezifische Rapid Prototyping in der Informations- und Elektrotechnik

    Freier Zugriff
    Kasper, Markus | TIBKAT | 2005
    Schlagwörter: Rapid Prototyping

    Investigation of a Bio-Inspired Liner Concept

    Koch, L. Danielle | NTRS | 2017
    Schlagwörter: additive manufacturing

    Plastic Manifold Rapid Prototyping Advances

    Vanderveen, Jim / Andreozzi, Mark / Yeung, Millan et al. | SAE Technical Papers | 1999
    Schlagwörter: Rapid prototyping

    Improving Competitiveness of Additive Manufacturing Aerospace Serial Parts

    Rene-Corail, Alexis / Iker, Guillaume / Gas, Maxime et al. | SAE Technical Papers | 2019
    Schlagwörter: Additive manufacturing

    Cloud-based design and virtual prototyping environment for embedded systems

    Freier Zugriff
    Werner, S. / Lauber, A. / Koedam, M.L.P.J. et al. | BASE | 2016
    Schlagwörter: Rapid Prototyping

    Double-Layer MPA mit additiv gefertigten porösen Absorbern

    Berchtenbreiter, Benedikt / FAU University Press ein Imprint der Universität Erlangen-Nürnberg, Universitätsbibliothek / Friedrich-Alexander-Universität Erlangen-Nürnberg | TIBKAT | 2023
    Schlagwörter: Rapid Prototyping (Fertigung)

    Design and Fabrication of a Bistable Unit Actuator with Multi-Material Additive Manufacturing

    Freier Zugriff
    Chen, T. / Mueller, J. / Shea, K. | BASE | 2016
    Schlagwörter: multi-material additive manufacturing , additive manufacturing

    Experimental characterization of a particle-damped motorcycle triple clamp

    Ehlers, Tobias | DataCite | 2023
    Schlagwörter: Additive Manufacturing

    Dimethoxy Methane in Diesel Fuel: Part 1. The Effect of Fuels and Engine Operating Modes on Emissions of Toxic Air Pollutants and Gas/Solid Phase PAH

    Manuel, A. / Lapin, Charles / González, D. et al. | SAE Technical Papers | 2001
    Schlagwörter: Rapid prototyping

    Additive Manufacturing Research and Development at the NASA Glenn Research Center

    Carter, Robert W. | NTRS | 2017
    Schlagwörter: Additive Manufacturing

    ALM2Air-Airbus - Additive Fertigung für das Flugzeug : öffentlicher Abschlussbericht : Berichtszeitraum 01.01.2016-30.06.2019

    Freier Zugriff
    Schröder, Matthias / Kandels, Fabian / Scharowksi, Thorsten et al. | TIBKAT | 2019
    Schlagwörter: Rapid Prototyping (Fertigung)

      ALM2Air-Airbus - Additive Fertigung für das Flugzeug : öffentlicher Abschlussbericht : Berichtszeitraum 01.01.2016-30.06.2019

      Schröder, Matthias / Kandels, Fabian / Scharowksi, Thorsten et al. | TIBKAT | 2019
      Schlagwörter: Rapid Prototyping (Fertigung)

    A review towards the design of extraterrestrial structures: From regolith to human outposts

    Kalapodis, Nicos / Kampas, Georgios / Ktenidou, Olga-Joan | Elsevier | 2020
    Schlagwörter: Additive manufacturing

    A New Approach for Development of a High-Performance Intake Manifold for a Single-Cylinder Engine Used in Formula SAE Application

    Anubhav, Routray / Venugopal, Thangavel | SAE Technical Papers | 2019
    Schlagwörter: Rapid prototyping

    Manufacturing of aircraft engine transmission gear with SLS (DMLS) method

    Rokicki, Pawel / Kozik, Bogdan / Budzik, Grzegorz et al. | Emerald Group Publishing | 2016
    Schlagwörter: Rapid prototyping

    Metal Additive Manufacturing for Propulsion Applications

    P. Gradl | NTIS | 2023
    Schlagwörter: Additive manufacturing

    Antriebsstrang- und Gesamtfahrzeugsimulation von Hybrid- und Elektrofahrzeugen

    Gospodaric, Davor / Böhling, J. | Tema Archiv | 2004
    Schlagwörter: Rapid-Prototyping

    Rapid Prototyping am Beispiel eines Energiemanagement-Projektes

    Winter, Arnold / Förch, U. / Kasper, M. | Tema Archiv | 2004
    Schlagwörter: Rapid-Prototyping

    The Evolution of Rapid Prototyping

    Menon, Cyrilla / Rogers, Diane / Church, Maxwell et al. | SAE Technical Papers | 2013
    Schlagwörter: Rapid prototyping

    Effect of Fiber Content on Anisotropic Behavior of 3D Printed Fiber Composites

    Sibley, Brian / Garcia, Jordan / Smith, Sayer et al. | SAE Technical Papers | 2023
    Schlagwörter: Additive manufacturing

    Sustainability Study of Additive Manufacturing Enabled Part Consolidation

    Naiju, CD / Raja, KUMAR / M, Senthil Kumar | SAE Technical Papers | 2022
    Schlagwörter: Additive manufacturing

    Automatic Tuning of Two-Degree-of-Freedom PID Control for Engine Electronic Throttle System

    Kitchen, James / Smith, Michael / Jiang, Shugang | SAE Technical Papers | 2010
    Schlagwörter: Rapid prototyping

    Synergic Product and Process Design for Additive Fabrication of Lightweight Vehicles

    Petruccioli, Andrea / Dalpadulo, Enrico / Pini, Fabio et al. | SAE Technical Papers | 2022
    Schlagwörter: Additive manufacturing

    Duct Shape Optimization Using Multi-Objective and Geometrically Constrained Adjoint Solver

    Nam, Jee-Whan / Patil, Sunil | SAE Technical Papers | 2019
    Schlagwörter: Additive manufacturing

    Experimental Validation of a Model-Based Water Injection Combustion Control System for On-Board Application

    Brusa, Alessandro / Ranuzzi, Francesco / Scocozza, Guido et al. | SAE Technical Papers | 2019
    Schlagwörter: Rapid prototyping

    Framework to Predict the Environmental Impact of Additive Manufacturing in the Life Cycle of a Commercial Vehicle

    Burkhart, Mathias / Aurich, Jan C. | Tema Archiv | 2015
    Schlagwörter: additive Fertigung

    Design of an Advanced Layered Composite for Energy Dissipation using a 3D-Lattice of Micro Compliant Mechanism

    Tovar, Andres / Marko, Carl / Chaudhari, Prathamesh et al. | SAE Technical Papers | 2016
    Schlagwörter: Additive manufacturing

    The Architecture of a Modular UAV with Additively Manufactured Frame: Preliminary Flight and Performance Evaluations

    Freier Zugriff
    Roberto Torre / Salvatore Brischetto | BASE | 2021
    Schlagwörter: additive manufacturing

    Unsettled Aspects of Insourcing and Outsourcing Additive Manufacturing

    Slattery, Kevin | SAE Technical Papers | 2021
    Schlagwörter: Additive manufacturing

    Optimal Torque Control for an Electric-Drive Vehicle with In-Wheel Motors: Implementation and Experiments

    Athari, Abtin / Khajepour, Amir / Litkouhi, Baktiar et al. | SAE Technical Papers | 2013
    Schlagwörter: Rapid prototyping

    NASA PhonesSat Program Overview

    C. R. Boshuizen | NTIS | 2011
    Schlagwörter: Rapid prototyping

    Control of Mixture Composition Using Cylinder Pressure Sensors

    Müller, Norbert / Isermann, Rolf | SAE Technical Papers | 2001
    Schlagwörter: Rapid prototyping

    Advanced Manufacturing Technologies

    Fikes, John | NTRS | 2016
    Schlagwörter: Additive Manufacturing

    NASA's Agency Wide Efforts to improve Non-destructive Evaluation Methods for Additive Manufacturing

    E. Burke / J. S. Jones / E. Lanigan et al. | NTIS | 2022
    Schlagwörter: Additive manufacturing

    Metal Additive Manufacturing Developments for Propulsion Applications

    P. Gradl | NTIS | 2022
    Schlagwörter: Additive manufacturing

    Additive Manufacturing for Propulsion Systems

    Paul Gradl / Tyler Gibson | NTRS
    Schlagwörter: Additive Manufacturing , Design for Additive Manufacturing

    Introduction to Metal Additive Manufacturing for Space Applications

    Paul Gradl | NTRS
    Schlagwörter: Metal Additive Manufacturing , Additive Manufacturing

    An Integrated Model for Prediction of Process-Structure-Property Relationship for Additively Manufactured Al-10Si-Mg Alloy

    Yenusah, Caleb / Yang, Wenhua / Liu, Yucheng et al. | SAE Technical Papers | 2020
    Schlagwörter: Additive manufacturing

    The Development of Fans for the International Space Station

    Converse, David G. | SAE Technical Papers | 1997
    Schlagwörter: Rapid prototyping

    Introduction to Metal Additive Manufacturing for Propulsion and Energy Applications

    Paul Gradl / Nathan Andrews / Omar R Mireles | NTRS
    Schlagwörter: Additive Manufacturing , Design for Additive Manufacturing

    A Reliability Engineering Process in a Simultaneous Engineering Environment

    Torma, Brian L. / Hsieh, Paul I. / Lee, Robert Eugene | SAE Technical Papers | 1998
    Schlagwörter: Rapid prototyping

    The Application of Additive Manufacturing to the 2018 SAE Aero Design Challenge

    Waters, Cynthia / Kizito, John / Blake, Nathan David et al. | SAE Technical Papers | 2019
    Schlagwörter: Additive manufacturing

    Development a HIL Test Bench for Electrically Controlled Steering System

    Zheng, Hongyu / Zhao, Mingxin | SAE Technical Papers | 2016
    Schlagwörter: Rapid prototyping

    Seriennahes Prototyping - flexible und kosteneffizient

    Eckmann, Martin / Mertens, Frank | Tema Archiv | 2006
    Schlagwörter: Rapid-Prototyping

    6 DOF Bench Test on a New Active Kinematics Rear Suspension for Functional Development

    Fricke, Dave / Ramirez Ruiz, Isabel / Garcia, Juan et al. | SAE Technical Papers | 2012
    Schlagwörter: Rapid prototyping

    A Modular Approach to Design Multi-Channel Bistable Valves for Integrated Pneumatically-Driven Soft Robots via 3D-Printing

    Freier Zugriff
    Sihan Wang / Liang He / Perla Maiolino | BASE | 2022
    Schlagwörter: Additive manufacturing

    Systemanalyse und Prototypenentwicklung einer durch Fluidinjektion induzierten Schubvektorsteuerung für Aerospike-Triebwerke

    Bach, Christian / Technische Universität Dresden | TIBKAT | 2020
    Schlagwörter: Rapid Prototyping (Fertigung)

      Systemanalyse und Prototypenentwicklung einer durch Fluidinjektion induzierten Schubvektorsteuerung für Aerospike-Triebwerke

      Bach, Christian / Technische Universität Dresden | SLUB | 2020
      Schlagwörter: Rapid Prototyping

    AM in Space: ISM and IRMA NASA Initiatives

    R. G. J. Clinton / N. Werkheiser / T. Prater et al. | NTIS | 2019
    Schlagwörter: Additive manufacturing in space