121–140 von 144 Ergebnissen
|

    Advancement of 2D profile testing at high Reynolds number in the cryogenic wind tunnel Cologne

    Zhai, Junnai / Rebstock, R. | Tema Archiv | 2003
    Cologne (DNW-KKK) has developed the 2D profile measuring technique for cryogenic conditions. In the first 2D test setup the profile is only driven ...
    Verlag: IEEE Operations Center , Piscataway

    Formulation of pressure sensitive paints for unsteady measurements

    Soumagne-Schweyckart, I. / Merienne, M.-C. / Ancelle, J. | IEEE | 2001
    One of the main part of Pressure Sensitive Paint (PSP) activity at Onera is devoted to the application of this technique to unsteady ...
    Verlag: IEEE

    Automotive Organic Rankine-Cycle Powerplant - Design and Performance Data

    Doyle, E. F. / Patel, P. / Sakhuja, R. et al. | SAE Technical Papers | 1974
    could meet the 1976 emission standards specified by Congress in the 1970 Clean Air Act. Performance and fuel consumption predictions are ...
    Verlag: Society of Automotive Engineers , SAE International

    Implementation of Lead-Free Solder for Automotive Electronics

    Baney, Brenda B. / Walls, Delbert R. / Whitten, Gordon C. et al. | SAE Technical Papers | 2000
    competitive reasons. The National Center for Manufacturing Sciences (NCMS-US)1, the International Tin Research Institute (ITRI-UK)2, Swedish Institute ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Production engineering

    Field damage analysis (FDA) concept: Analysis of complex damage causes

    Bracke, S. / Haller, S. | Tema Archiv | 2011
    standard for reliability analysis can fulfill the requirements of a comprehensive reliability analysis over the entire product life cycle. Based on ...
    Verlag: IEEE Operations Center , Piscataway

    Development of high-temperature polyimide adhesives for a high speed civil transport: an OEM perspective

    Pate, K.D. / Cao, Tuan-Q. | Tema Archiv | 1998
    manufacturer (OEM) perspective. FM x5, a Cytec Fiberite film adhesive based on NASA-developed LaRC PETI-5 polyimide resin, was evaluated for basic ...
    Verlag: Society for the Advancement of Material and Process Engineering (SAMPE) , Covina

    Mechanisms for a reliable cooperation of vehicles

    Nett, E. / Gergeleit, M. / Mock, M. | Tema Archiv | 2001
    robust and scalable than centralized approaches. Besides the 'obvious' requirements on high assurance computing in traffic control systems, the ...
    Verlag: IEEE Computer Society Press , Los Alamitos

    Brake and Clutch Pedal System Optimization Using Design for Manufacture and Assembly

    Ardayfio, David D. / Opra, John J. | SAE Technical Papers | 1992
    This paper describes the application of the Design for Manufacture and Assembly (DFMA) method at Chrysler. Attention is focused on the ...
    Verlag: Society of Automotive Engineers , SAE International

    Der Frontend-Montageträger und seine Funktionen im Modul

    Schmidt, Ralf / Opperbeck, Guido / Amrhein, Joachim | Tema Archiv | 2009
    der Auslegung von Montageträgern durchgesetzt. Die Kunststoff-Metall-Hybrid-Technik bietet dem Anwender ein hohes Maß an Bauteilsteifigkeit ...

    Accelerated Glass Reveal Molding Test

    Dziadzio, Bruce / Finken, Muriel / Bishop, Terry et al. | SAE Technical Papers | 1998
    savings on cars and trucks world-wide. The process of assembly is generally simple and convenient but to replace a reveal molding can be difficult ...
    Verlag: Society of Automotive Engineers , SAE International

    Array designs optimized for both low-frequency NAH and high-frequency Beamforming

    Hald, Jørgen / Gade, Svend | SAE Technical Papers | 2005
    and how to perform NAH processing on irregular array measurements. The combined measurement technique using only one array seems to offer a ...
    Verlag: Society of Automotive Engineers , SAE International

    Simultaneous Topology and Performance Redesign by Large Admissible Perturbations for Automotive Structural Design

    Suryatama, Danet / Budnick, Gerald F. / Bernitsas, Michael M. et al. | SAE Technical Papers | 2001
    1983 in the Department of Naval Architecture and Marine Engineering, the University of Michigan. LEAP theory has successfully solved various ...
    Verlag: Society of Automotive Engineers , SAE International

    SAE J2746 Software Assessment Repository

    Rushton, Gary / Abowd, Peter | SAE Technical Papers | 2009
    achieving significant improvements in software quality and reductions in cost throughout the automotive supply chain. The Software Engineering ...
    Verlag: Society of Automotive Engineers , SAE International

    Research activities in automotive radar

    Rohling, H. / Meinecke, M.M. / Mott, K. et al. | Tema Archiv | 2001
    control (ACC) are already available on the market as 77 GHz radars. Target range and velocity are measured simultaneously with high resolution and ...
    Verlag: IEEE Operations Center , Piscataway

    Design and noise analysis of an automotive accelerometer

    Joseph, E.D. / Kar, B.K. / Rohrkemper, R. et al. | Tema Archiv | 1996
    . The accelerometer requires a 5 V power supply and consumes 3.8 mA of quiescient current. The frequency response is flat from dc to 400 Hz and ...
    Verlag: IEEE Service Center , Piscataway
    Schlagwörter: CMOS-Technik

    Integrated risk analysis for scale management in deepwater developments

    Mackay, E.J. / Jordan, M.M. / Feasey, N.D. et al. | Tema Archiv | 2004
    managing those risks. This paper discusses how this risk analysis process should be carried out, with a strong emphasis on the need to integrate ...

    Advanced Three-Way Converter System for High Temperature Exhaust Aftertreatment

    Kessler, Barry / Snider, Benny / Jones, Lisa F. et al. | SAE Technical Papers | 1997
    systems capable of meeting both performance and durability requirements over a wide range of temperatures[1, 2, 3, 4, 5, 6, 7, 8, 9 and 10 ...
    Verlag: Society of Automotive Engineers , SAE International

    Attitude Ground System (AGS) For The Magnetospheric Multi-Scale (MMS) Mission

    Raymond, Juan C. / Sedlak, Joseph E. / Vint, Babak | NTRS | 2015
    -dimensional study of the phenomenon of magnetic reconnection, which is the primary objective of the mission. The MMS spacecraft were launched early on ...

    A Dyno Data Acquisition System for Lean NOx Trap Investigations

    Asik, Joseph R. / Zhang, Quingjun / Beier, Robert J. | SAE Technical Papers | 2001
    properties of lean NOx traps for an engine dynamometer environment. The system is based on the industry standard VXI backplane. The overriding design ...
    Verlag: Society of Automotive Engineers , SAE International

    The Importance of Technology Readiness in NASA Earth Venture Missions

    Wells, James E. / Komar, George J. | NTRS | 2009
    mature technology that has been modeled or demonstrated in a relevant environment (Technology Readiness Level (TRL) >5). Technology Readiness ...