1–20 von 32 Ergebnissen
|

    Failure Mode and Fatigue Behavior of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets of Different Thicknesses

    Pan, Jwo / Friedman, Peter / Sung, Shin-Jang et al. | SAE Technical Papers | 2018
    Failure mode and fatigue behavior of flow drill screw (FDS) joints in lap-shear specimens of aluminum 6082-T6 sheets of different ...
    Verlag: Society of Automotive Engineers , SAE International

    Investigation of Failure Mode and Fatigue Behavior of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets

    Yan, Frank / Pan, Jwo / Friedman, Peter et al. | SAE Technical Papers | 2016
    Failure mode and fatigue behavior of flow drill screw (FDS) joints in lap-shear specimens of aluminum 6082-T6 sheets with and without ...
    Verlag: Society of Automotive Engineers , SAE International

    Modeling of Failure Modes of Gas Metal Arc Welds in Notched Lap-Shear Specimens of HSLA Steel

    Amodeo, Catherine / Pan, Jwo | SAE Technical Papers | 2014
    The failure modes of gas metal arc welds in notched lap-shear specimens of high strength low alloy (HSLA) steel are investigated. Notched ...
    Verlag: Society of Automotive Engineers , SAE International

    Fatigue Behavior of Dissimilar Ultrasonic Spot Welds in Lap-Shear Specimens of Magnesium and Steel Sheets

    Pan, Jwo / Santella, Michael / Franklin, Teresa J. et al. | SAE Technical Papers | 2011
    Fatigue behavior of dissimilar ultrasonic spot welds in lap-shear specimens of magnesium AZ31B-H24 and hot-dipped-galvanized mild steel ...
    Verlag: Society of Automotive Engineers , SAE International

    Compressive Behavior of Representative Volume Element Specimens of Lithium-Ion Battery Cells under Different Constrained Conditions

    Pan, Jwo / Ali, Mohammed Yusuf / Barbat, Saeed et al. | SAE Technical Papers | 2014
    The compressive behavior of lithium-iron phosphate battery cells is investigated by conducting in-plane constrained compression tests and ...
    Verlag: Society of Automotive Engineers , SAE International

    Closed-Form Structural Stress Solutions for Fatigue Life Estimations of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets

    Pan, Jwo / Zhang, Lunyu / Friedman, Peter et al. | SAE Technical Papers | 2017
    Closed-form structural stress solutions are investigated for fatigue life estimations of flow drill screw (FDS) joints in lap-shear ...
    Verlag: Society of Automotive Engineers , SAE International

    Failure Mode and Fatigue Behavior of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets Made with Different Processing Conditions

    Pan, Jwo / Friedman, Peter / Sung, Shin-Jang et al. | SAE Technical Papers | 2018
    Failure mode and fatigue behavior of flow drill screw (FDS) joints in lap-shear specimens of aluminum 6082-T6 sheets made with different ...
    Verlag: Society of Automotive Engineers , SAE International

    Failure Mode and Fatigue Behavior of Dissimilar Laser Welds in Lap-Shear Specimens of Aluminum and Copper Sheets

    Pan, Jwo / Sung, Shin-Jang / Lai, Wei-Jen et al. | SAE Technical Papers | 2014
    Failure mode and fatigue behavior of dissimilar laser welds in lap-shear specimens of aluminum and copper sheets are investigated. Quasi ...
    Verlag: Society of Automotive Engineers , SAE International

    Fatigue Behavior of Self-Piercing Rivets and Clinch Joints in Lap-Shear Specimens of Aluminum Sheets

    Pan, Jwo / Lin, Pai-Chen / Lai, Wei-Jen et al. | SAE Technical Papers | 2013
    Fatigue behavior of self-piercing rivets (SPRs) and clinch joints in lap-shear specimens of 6111-T4 aluminum sheets is investigated based ...
    Verlag: Society of Automotive Engineers , SAE International

    Failure Mode and Fatigue Behavior of Ultrasonic Spot Welds with Adhesive in Lap-Shear Specimens of Magnesium and Steel Sheets

    Pan, Jwo / Santella, Michael / Pan, Tsung-Yu et al. | SAE Technical Papers | 2013
    Failure modes and fatigue behaviors of ultrasonic spot welds in lap-shear specimens of magnesium AZ31B-H24 and hot-dipped-galvanized mild ...
    Verlag: Society of Automotive Engineers , SAE International

    Effects of Roller Diameter and Number on Fatigue Lives of Cam Roller Follower Bearings

    Lee, Jaewon / Pan, Jwo / Ho, Simon et al. | SAE Technical Papers | 2011
    Effects of roller diameter and number on the contact pressures, subsurface stresses and the fatigue lives of cam roller follower bearings ...
    Verlag: Society of Automotive Engineers , SAE International

    Ultrasonic Spot Welding of AZ31B to Galvanized Mild Steel

    Brown, Elliot / Pan, Jwo / Santella, Michael et al. | SAE Technical Papers | 2010
    Ultrasonic spot welds were made between sheets of 0.8-mm-thick hot-dip-galvanized mild steel and 1.6-mm-thick AZ31B-H24. Lap-shear ...
    Verlag: Society of Automotive Engineers , SAE International

    Fatigue Behavior of Stainless Steel Sheet Specimens at Extremely High Temperatures

    Engler-Pinto, Carlos Carvalho / Konson, Dmitri / Yang, Fulun et al. | SAE Technical Papers | 2014
    temperatures create a unique challenge for the design of regeneration structural components near their melting temperatures. In this paper, the ...
    Verlag: Society of Automotive Engineers , SAE International

    Fatigue Failure of Laser Welds in Lap-Shear Specimens of High Strength Low Alloy (HSLA) Steels under Cyclic Loading Conditions

    Pan, Jwo / Asim, Kamran / Sripichai, Kulthida | SAE Technical Papers | 2011
    In this paper, the fatigue behavior of laser welds in lap-shear specimens of non-galvanized SAE J2340 300Y high strength low alloy (HSLA ...
    Verlag: Society of Automotive Engineers , SAE International

    Failure Mode and Fatigue Behavior of Friction Stir Spot Welds in Lap-Shear Specimens of Dissimilar Advanced High Strength Steels

    Pan, Jwo / Avery, Katherine / Santella, Michael et al. | SAE Technical Papers | 2013
    Failure mode and fatigue behavior of friction stir spot welds made with convex and concave tools in lap-shear specimens of dissimilar high ...
    Verlag: Society of Automotive Engineers , SAE International

    Failure Modes of Friction Stir Spot Welds in Lap-Shear Specimens of Dissimilar Advanced High Strength Steels under Quasi-Static and Cyclic Loading Conditions

    Yu, Chia-Siung / Pan, Jwo / Avery, Katherine et al. | SAE Technical Papers | 2012
    Failure modes of friction stir spot welds in lap-shear specimens of dissimilar high strength dual phase steel (DP780GA) and hot stamped ...
    Verlag: Society of Automotive Engineers , SAE International

    Mechanical Behavior of Representative Volume Element Specimens of Lithium-Ion Battery Modules without and with Electrolyte under Quasi-Static and Dynamic In-Plane Compressive Loading Conditions

    Kim, Eui Seop / Pan, Jwo / Sung, Shin-Jang et al. | SAE Technical Papers | 2019
    Small rectangular representative volume element (RVE) specimens of lithium-ion battery modules without and with electrolyte were tested ...
    Verlag: Society of Automotive Engineers , SAE International

    Failure Mode and Fatigue Behavior of Dissimilar Laser Welds in Lap-Shear Specimens of Low Carbon Steel and HSLA Steel Sheets

    Pan, Jwo / Lin, Pai-Chen / Lai, Wei-Jen et al. | SAE Technical Papers | 2015
    In this paper, failure modes of dissimilar laser welds in lap-shear specimens of low carbon steel and high strength low alloy (HSLA) steel ...
    Verlag: Society of Automotive Engineers , SAE International

    Stress Intensity Factor Solutions for Dissimilar Welds in Lap-Shear Specimens of Steel, Magnesium, Aluminum and Copper Sheets

    Pan, Jwo / Lai, Wei-Jen | SAE Technical Papers | 2015
    In this paper, the analytical stress intensity factor and J integral solutions for welds in lap-shear specimens of two dissimilar sheets ...
    Verlag: Society of Automotive Engineers , SAE International

    Effects of Non-Associated Flow on Residual Stress Distributions in Crankshaft Sections Modeled as Pressure-Sensitive Materials under Fillet Rolling

    Sever, Cagri / Sorab, Jagadish / Pan, Jwo et al. | SAE Technical Papers | 2015
    element program ABAQUS. A two-dimensional plane strain finite element analysis of a crankshaft section under fillet rolling was conducted. After ...
    Verlag: Society of Automotive Engineers , SAE International