In this study, macroscale responses of asphalt concrete (AC) are predicted from the responses of its corresponding microscale representative volume element (RVE) within a finite element framework using quasi-static and dynamic analyses. Nanoindentation test was performed on the mastic and aggregate phase of an AC sample to determine the viscoelastic and elastic properties of RVE elements. Aggregate-mastic proportions in the RVE were obtained from the morphological image analysis. Macroscale model responses were compared with the AC pavement responses obtained from an instrumented pavement section subjected to falling weight deflectometer loading and a class 9 vehicle. Model responses are very close to the actual responses. The multiscale analyses show that tensile strain in microscale RVE is 5–10 times higher than that in a macroscale element. Furthermore, multiscale analyses also show that variations in the microscale RVE, such as the reduction in the aggregate-mastic ratio or increment in the voids, can increase the maximum tensile strain at the bottom of the AC in macroscale model by around 25%.
Multiscale Modeling of Asphalt Concrete and Validation through Instrumented Pavement Section
Transportation Research Record
Transportation Research Record: Journal of the Transportation Research Board ; 2675 , 6 ; 117-136
2021-02-02
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Asphalt Concrete Pavement Design and Evaluation
NTIS | 1974
|Pavement smoothness of asphalt concrete overlays
Online Contents | 2016
|