It is well known that cracking resistance of hot-mix asphalt (HMA) mixtures is influenced by many factors, such as the asphalt binder type, binder content, aggregate gradation, aggregate type, and volumetric parameters of mixtures. The Texas Transportation Institute's overlay tester (OT) was used to evaluate cracking performance in terms of number of cycles to failure (NOT), and an experimental design was undertaken to cover the many combinations of aggregates, gradations, and asphalt binders. Through extensive laboratory tests and statistical analyses, the most significant factors that affected cracking performance were identified. Corresponding NOT prediction models were developed with high R2 values (approximately .9). With these models, the minimum asphalt content for different HMA mixtures was estimated, and the lower limits of asphalt content during mix design were recommended. Finally, the models and recommended values were preliminarily verified with asphalt overlay test sections on Interstate 20 near Atlanta, Texas.
Factors that Affect Cracking Performance in Hot-Mix Asphalt Mix Design
Transportation Research Record
Transportation Research Record: Journal of the Transportation Research Board ; 2210 , 1 ; 37-46
2011-01-01
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Factors That Affect Cracking Performance in Hot-Mix Asphalt Mix Design
Online Contents | 2011
|Design Factors That Affect Diesel Emissions
SAE Technical Papers | 1971
|How Performance Factors Affect Transmission Design
SAE Technical Papers | 1959
|Lithium–oxygen batteries—Limiting factors that affect performance
Online Contents | 2011
|Low-Temperature Thermal Cracking of Asphalt Binder by Asphalt Binder Cracking Device
Transportation Research Record | 2006
|