Through development and evaluation of the warm-mix asphalt (WMA) mixture design process, increased moisture susceptibility has been cited as one of the potential critical failure modes for WMA. Reduced production temperatures can affect the drying of the aggregate before mixing, the development of adhesion at the asphalt–aggregate interface, and binder stiffness. The objective of this research is to identify the significance of these factors and to define their relative contribution to mixture resistance to moisture damage. To evaluate the contribution of asphalt binder–aggregate adhesion, the bitumen bond strength (BBS) test was implemented on dry and moisture-conditioned samples. The effect of production temperature was simulated by heating aggregate substrates to hot-mix asphalt (HMA) and WMA temperatures before applying the asphalt binder. Furthermore, the effect of reduced binder stiffness resulting from lower production temperatures was considered through establishing two controls for mixture performance testing: a conventional HMA and a mixture prepared at WMA temperatures without WMA additives. The relevance of these factors was established through comparison with mixture performance as measured by the reduction in dynamic modulus, as a function of conditioning cycles. Mixture sample preparation allowed for consideration of residual moisture in aggregate that might have been associated with WMA and provided a control HMA sample prepared under standard conditions to establish a performance benchmark. Recommendations were made for incorporation of these new test methods into current WMA mixture design specifications. In summary, both BBS and dynamic modulus testing indicated that specific WMA additives could improve the mixture's moisture resistance and could offset any negative effects from the reduced production temperatures on moisture susceptibility. Therefore, selecting appropriate warmmix additives during the mix design process can help mitigate potential moisture damage associated with WMA.


    Zugriff

    Download

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Evaluating Adhesion Properties and Moisture Damage Susceptibility of Warm-Mix Asphalts


    Untertitel :

    Bitumen Bond Strength and Dynamic Modulus Ratio Tests


    Weitere Titelangaben:

    Transportation Research Record


    Beteiligte:
    Alavi, Mohammad Zia (Autor:in) / Hajj, Elie Y. (Autor:in) / Hanz, Andrew (Autor:in) / Bahia, Hussain U. (Autor:in)


    Erscheinungsdatum :

    2012-01-01




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch