The proper functioning of the joint between the carrier casting and the housing axle assembly of a heavy vehicle is critical to the performance of the vehicle's drivetrain. An analytical procedure to study this joint using a finite element model was developed. This model predicted the maximum slip coefficient at each fastener in the joint required to prevent slip. The critical fasteners identified by the analysis coincided with field observations made on vehicle tests. The analytical model was used to identify the critical design parameters which contribute to the shear loads induced at the joint. These parameters included the material properties, the wall thickness and geometrical shape of the casting and housing structures. A combination of these parameters which minimized the joint shear loads was also identified.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Predicting fastener forces in a carrier-housing joint


    Beteiligte:
    Somnay, R.J. (Autor:in) / Basas, J.E. (Autor:in) / Shih, Shan (Autor:in)


    Erscheinungsdatum :

    1998


    Format / Umfang :

    Seiten



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Datenträger


    Sprache :

    Englisch




    Rail joint fastener

    KI JUN LEE / SUNG KI LEE | Europäisches Patentamt | 2021

    Freier Zugriff

    Battery system housing with fastener

    MASTRANDREA FRANCESCO / TUTZER PETER | Europäisches Patentamt | 2018

    Freier Zugriff

    Fastener, fastener monitoring system and infant carrier

    CUI ZONGWANG / CHENG MANQUN | Europäisches Patentamt | 2022

    Freier Zugriff

    Hot joint fastener

    VICHNIAKOV ALEXEI | Europäisches Patentamt | 2021

    Freier Zugriff

    BATTERY SYSTEM HOUSING WITH FASTENER

    MASTRANDREA FRANCESCO / TUTZER PETER | Europäisches Patentamt | 2018

    Freier Zugriff