A laboratory test method has been described for measuring the high frequency dynamic stiffness of resilient rail fasteners in the region 100-1000 Hz. The stiffness is found to be virtually independent of frequency in the range studied apart from the occurrence of internal resonances in two-layer systems. Dynamic-to-static stiffness ratios of between 2 and 8 have been found. The stiffness is also strongly dependent on the preload in many cases, increasing by factors up to 3 under a 40 kN load. Comparisons with stiffness values derived from field measurements of track frequency responses show good agreement once the effect of preload has been allowed for. The damping loss factors apparent in the field measurements, from the width of resonance peaks and the decay of vibration along the track, are generally higher than those measured in the test rig. However, this may be related to variations between pad stiffnesses, sleeper spacings, etc. introducing variations in resonance frequency and additional spatial attenuation in the rail vibration.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    The dynamic behaviour of rail fasteners at high frequencies


    Beteiligte:
    Thompson, D.J. (Autor:in) / Verheij, J.W. (Autor:in)

    Erschienen in:

    Applied Acoustics ; 52 , 1 ; 1-17


    Erscheinungsdatum :

    1997


    Format / Umfang :

    17 Seiten, 7 Bilder, 5 Tabellen, 11 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch





    Grease coating device for steel rail fasteners

    HE LIN / SU ZHAOYI / LIU GUANGWU et al. | Europäisches Patentamt | 2015

    Freier Zugriff

    Detection of Range-Based Rail Gage and Missing Rail Fasteners

    Lorente, Alejandro García / Llorca, David Fernández / Velasco, Miguel Gavilán et al. | Transportation Research Record | 2014