Ball ended milling cutters are extensively used in machining parts with sculptured surfaces. Milling of dies for forming, forging and injection plastic molding are most common operations in die shops. The dies are generally made of tool steels which are hard to machine. Breakage of tool shank and chipping of ball shaped helical flutes are the critical factors in ball end milling of die steels. In aerospace industry, aerodynamic sculptured shapes are milled with ball ended cutters. The aerospace parts are generally made of Titanium, Nickel and Aluminum alloys, and the dimensional accuracy and metal removal efficiency are critical factors in such operations. Ball end milling of compressor and turbine blades are typical operations in the aircraft engine industry. Mechanics of cutting with ball ended helical cutters are modeled. The model is based on the analytic representation of ball shaped helical flute geometry, and its rake and clearance surfaces. It is assumed that friction and pressure loads on the rake face are proportional to the uncut chip thickness area. The load on the flank contact face are concentrated on the in cut portion of the cutting edge. The pressure and friction coefficients are identified from a set of slot milling tests at different feeds and axial depth of cuts, and are used to predict the cutting forces for any cutting condition. The experimentally verified model accurately predicts the cutting forces in the three cartesian directions.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Mechanics of ball end milling process


    Weitere Titelangaben:

    Mechanik des Fräsprozesses mit kugelförmigem Fräser


    Beteiligte:
    Yücesan, G. (Autor:in) / Altintas, Y. (Autor:in)


    Erscheinungsdatum :

    1993


    Format / Umfang :

    9 Seiten, 7 Bilder, 14 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Electrochemical properties of LiFePO4 prepared via ball-milling

    Fey, George Ting-Kuo | Online Contents | 2009


    High speed ball nose end milling of inconel 718

    Ng, E.G. / Lee, D.W. / Sharman, A.R.C. et al. | Tema Archiv | 2000


    HOLE MAKING USING BALL HELICAL MILLING ON TITANIUM ALLOYS

    Olvera, D. / de Lacalle, L.N.L. / Urbikain, G. et al. | British Library Online Contents | 2012


    Study on boron/magnesium compound materials by wet ball milling

    Yang,J. / Xu,T. / Yang,H. et al. | Kraftfahrwesen | 2014


    Ball Milling of WC-Co Powder as Injection Molding Feedstock

    Amin, S.Y.M. / Muhamad, N. / Jamaludin, K.R. et al. | British Library Conference Proceedings | 2012