Some papers on gear noise indicate that for helical gers, the vibrational excitation becomes a minimum when the gears in mesh rotate at a total tooth-contact ratio, where the variation of tooth-stiffness may be minimized. Based on this finding, we have designed a pair of helical gears, of which number of teeth in contact (2, 3, or 4) would be fixed at any instant of time during the gear rotation. Both the face- and total-contact ratios of involute tooth-face have often been considered to be integers, and a little higher value for the gear with inaccurate tooth-face. Meanwhile, it has been confirmed by computation and experiments that the vibrational excitation of carburized production gears, paired with carburized or hard-finished ones, would decrease if their total contact ratios have been set higher. The present study reveals that the exciting force is much dependent on the total contact ratio, and is little affected by chosing an integer contact ratio. And the exciting force of gear decreases at higher total contact ratio while no minimum force is observed. When a drive gear rotates at a fixed speed, the variation of driven gear teeth delays, from the theoretical tooth location determined from the gear ratio, due to the tooth deflection and profile errors. This delay is normally variable, and its variable amplitude, determined from the pitch circle of the gear, is denoted as the meshing transmission errors (hereinafter referred to MTEs), and the foundamental harmonic mesh component in the exciting force, can be expressed as the foundamental component of MTEs.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    A study on gear noise reduction based on helical-gear tooth accuracy


    Weitere Titelangaben:

    Eine Untersuchung der Getriebegeräuschverminderung, basierend auf der Verzahnungsgenauigkeit bei Getrieben mit Schraubenverzahnung


    Beteiligte:
    Kawamoto, S. (Autor:in) / Hirogaki, T. (Autor:in) / Ida, T. (Autor:in) / Ono, A. (Autor:in)

    Erscheinungsdatum :

    1991


    Format / Umfang :

    6 Seiten, 7 Bilder, 1 Tabelle, 5 Quellen


    Medientyp :

    Konferenzband


    Format :

    Print


    Sprache :

    Englisch




    A Study on Gear Noise Reduction Based on Helical-Gear Tooth Accuracy

    Ono, Akira / Kawamoto, Shigeru / Hirogaki, Toshiki et al. | SAE Technical Papers | 1991


    A study on gear noise reduction based on helical-gear tooth accuracy

    Kawamoto,S. / Hirogaki,T. / Ida,T. et al. | Kraftfahrwesen | 1991


    HELICAL TOOTH BELT AND BELT TRANSMISSION GEAR

    YOSHIDA MASAKUNI / ISOE SHUNSUKE / DEGUCHI ISAO | Europäisches Patentamt | 2017

    Freier Zugriff

    Effect of gear tooth contact on automobile transmission gear noise

    Nakagawa,I. / Maruyama,N. / Morikawa,K. et al. | Kraftfahrwesen | 1989