In the evaluation of crashworthiness of roadside safety features, full-scale impact tests are generally required according to the established test protocols. Since the tests are expensive, it is useful to predict the crash responses of a vehicle from the other size test vehicles. This concept was used in the Manual for Assessing Safety Hardware (MASH) of American Association of State Highway and Transportation Officials (AASHTO) to decide whether mid-size vehicle tests are necessary for an attenuator system design in addition to the small car and pickup truck tests. The general applicability of this procedure in the estimation of impact responses of one vehicle from the tested vehicle is studied using the crash test data of 11 crash cushions tested by the Korea Expressway Corporation Research Institute (KECRI). Each of the 11 crash cushions has two sets of test data from 1.3 and 0.9 ton vehicles tested with an impact speed of 80 or 100 km/h depending on the class of each system. Using the procedure, for each of the 11 systems, 1.3 ton crash data were transformed into the 0.9 ton crash data, then the estimated 0.9 ton crash data were compared with the 0.9 ton test data. It was found that the crash data predictions deviated from the test data, leading to overly conservative estimation of safety risk factors. The procedure was also found inapplicable in estimating crash data of a large vehicle (1.3 ton) from the test data of a small vehicle (0.9 ton). New procedure to estimate the crash data of a vehicle from the test vehicle regardless of their relative mass size was developed and the method was validated using the crash test data of 11 different crash cushions. In the new procedure developed, pivoting the velocity trace of test vehicle was utilised. The new procedure showed favourable results in estimating the crash data of a small vehicle (0.9 ton) from the crash data of a large test vehicle (1.3 ton). It can also be applied in reverse case estimation where the predicting vehicle (1.3 ton) was larger than the test vehicle (0.9 ton).


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Estimating the crash responses of a vehicle from the other size vehicle tested


    Beteiligte:
    Ko, Man-Gi (Autor:in) / Jang, Dae-Young (Autor:in) / Joo, Jae-Woong (Autor:in) / Kim, Kee-Dong (Autor:in) / Kim, Dong-Seong (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2015


    Format / Umfang :

    12 Seiten, 8 Bilder, 4 Tabellen, 11 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Estimating the crash responses of a vehicle from the other size vehicle tested

    Ko, Man-Gi / Jang, Dae-Young / Joo, Jae-Woong et al. | Taylor & Francis Verlag | 2015


    Crash injury and vehicle size mix

    Carlson,W.L. / St.Olaf Coll.Northfield,Dep.of Econ.,US / Natl.Highw.Traffic Saf. Adm.,Math.Anal.Div.,Washington,US | Kraftfahrwesen | 1978


    Crash test variability - dummy and vehicle responses

    Faerber,E. / Bundesanstalt fuer Strassenwesen,BASt,Bergisch-Gladbach,DE | Kraftfahrwesen | 1988


    Mercedes A-class crash tested

    Online Contents | 1996


    Modelling two-vehicle crash severity by generalized estimating equations

    Chiou, Yu-Chiun / Fu, Chiang / Ke, Chia-Yen | Elsevier | 2020