Previous studies indicated that the availability of mixed shredded aluminum scrap from end-of-life vehicles (ELV) is likely to surpass the capacity of secondary castings to absorb this type of scrap, which could lead to a scrap surplus unless suitable interventions can be identified and implemented. However, there is a lack of studies analyzing potential solutions to this problem, among others, because of a lack of component- and alloy-specific information in the models. In this study, we developed a dynamic model of aluminum in the global vehicle stock (distinguishing 5 car segments, 14 components, and 7 alloy groups). The forecasts made up to the year 2050 for the demand for vehicle components and alloy groups, for the scrap supply from discarded vehicles, and for the effects of different ELV management options. Furthermore, we used a source-sink diagram to identify alloys that could potentially serve as alternative sinks for the growing scrap supply. Dismantling the relevant components could remove up to two-thirds of the aluminum from the ELV stream. However, the use of these components for alloy-specific recycling is currently limited because of the complex composition of components (mixed material design and applied joining techniques), as well as provisions that practically prevent the production of safety-relevant cast parts from scrap. In addition, dismantling is more difficult for components that are currently penetrating rapidly. Therefore, advanced alloy sorting seems to be a crucial step that needs to be developed over the coming years to avoid a future scrap surplus and prevent negative energy use and emission consequences.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Component- and Alloy-Specific Modeling for Evaluating Aluminum Recycling Strategies for Vehicles


    Beteiligte:


    Erscheinungsdatum :

    2014


    Format / Umfang :

    10 Seiten, Bilder, Tabellen, 33 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Aluminum alloy component

    SUGINO KOKI / YOSHIDA MASATOSHI | Europäisches Patentamt | 2020

    Freier Zugriff

    EXTERIOR COMPONENT FOR VEHICLES AND RECYCLING METHOD THEREFOR

    ISHIKAWA TENDO / KUNO KOJI / IMAI HIDEYUKI et al. | Europäisches Patentamt | 2023

    Freier Zugriff

    Aluminum alloy advances for ground vehicles

    Nickodemus, G.H. / Kramer, L.S. / Pickens, J.R. et al. | Tema Archiv | 2002


    Aluminum alloy 2519 in military vehicles

    Fisher, J.J. jun. / Kramer, L.S. / Pickens, J.R. | Tema Archiv | 2002


    Snapshots for Evaluating Component Operation in Autonomous Vehicles

    YEHOSHUA SHIR / CHARROW BENJAMIN | Europäisches Patentamt | 2023

    Freier Zugriff