As part of various activities related to electric drives, ZF Friedrichshafen AG works on chassis integrated electric drives as well. The objective is to determine the potential of wheel-individual drives and to find a advantageous concept with a view to the current state of technology. The essential result of this study is called Electric Twist Beam (eTB) - the compact solution for electric driving. With the eTB, a chassis integrated drive system for small vehicles has been developed and tested. During this development, it was essential to consider both aspects regarding driveline and chassis, to find a concept which fulfills all necessary functions. The fundamental advantages of the resulting system can be summarized by the following points: (1) Low system weight: Achieved by functional integration and the high-speed drive concept, the system weight can be significant reduced. (2) Reduced installation space: Because the drive units are fully integrated in the chassis, additional space at the body-side is available and the vehicle architecture can be designed with fewer restraints. (3) Low unsprung mass: Compared to known in-wheel motor concepts, the unsprung mass is significantly reduced by the advantageous positioning of the motor and the high-speed drive concept. (4) Wheel-individual drive torques: Because drive torques of each traction wheel can be controlled individually (so-called 'torque vectoring'), agility and driving safety are clearly improved. In addition, electric motors provide a faster response characteristic and a better steady-state control accuracy compared to friction brakes, which gives potential to improve wheel slip control. (5) Simple vehicle integration: As conventional body designs were considered during the development and body-mounting points were kept at typical positions, the Electric Twist Beam can easily be integrated into conventional vehicles of the target segment.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Electric twist beam (eTB) - The compact solution for electric driving


    Beteiligte:


    Erscheinungsdatum :

    2013


    Format / Umfang :

    5 Seiten, 4 Bilder



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Electric Twist Beam ( ETB ) - the compact solution for electric driving

    Elbers,C. / Domian,H.J. / Pollmeyer,S. et al. | Kraftfahrwesen | 2013


    Electric Twist Beam (eTB)

    Elbers, C. / Domian, H.-J. / Pollmeyer, S. et al. | British Library Conference Proceedings | 2014


    Electric Twist Beam ( eTB ) - a report of the driving test

    Gilsdorf,J. / Pollmeyer,S. / Baasch,D. et al. | Kraftfahrwesen | 2014


    Electric Twist Beam (eTB) - A report of the driving tests

    Gilsdorf, Joachim / Pollmeyer, Stephan / Baasch, Detlef et al. | Tema Archiv | 2014


    Electric flat twist vehicle

    CHEN HUIZHEN | Europäisches Patentamt | 2015

    Freier Zugriff