A conceptual design of vacuum chamber is proposed to study the thermal response of high heat flux components under energy depositions of the magnitude and durations expected in plasma fusion devices. It is equipped with high power electron beam with maximum beam power of 200 KW mounted in a stationary horizontal position from back side of the chamber. The electron beam is used as a heat source to evaluate the heat removal capacity, material performance under thermal loads & stresses, thermal fatigue etc on actively cooled mock ups which are mounted on a flange system which is the front side door of the chamber. The tests mock ups are connected to a high pressure high temperature water circulation system (HPHT-WCS) operated over a wide range of conditions. The vacuum chamber consists of different ports at different angles to view the mock -up surface available for mock -up diagnostics. The vacuum chamber is pumped with different pumps mounted on side ports of the chamber. The chamber is shielded from X rays which are generated inside the chamber when high-energy electrons are incident on the mock-up. The design includes development of a conceptual design with theoretical calculations and CAD modelling of the system using CATIA V5. These CAD models give an outline on the complete geometry of HHF test chamber, fabrication challenges and safety issues. FEA analysis of the system has been performed to check the structural integrity when the system is subjected to structural & thermal loads.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Conceptual Design of Vacuum Chamber for testing of high heat flux components using electron beam as a source


    Beteiligte:
    Khan, M.S. (Autor:in) / Swamy, Rajamannar (Autor:in) / Khirwadkar, S.S. (Autor:in)


    Erscheinungsdatum :

    2012


    Format / Umfang :

    6 Seiten, 6 Quellen




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Vacuum-chamber testing of space-exposed SPEAR-I HV components

    Antoniades, J. / Alport, M. / Boyd, D. et al. | Tema Archiv | 1990




    Towards Thermal Balance Testing Using Thermal Vacuum Chamber HVT-50

    Ng, S. / American Institute of Aeronautics and Astronautics | British Library Conference Proceedings | 2010


    Thermal-vacuum testing of high-temperature electrical components

    Grant, W. L. / Kueser, P. E. | TIBKAT | 1970