Cathodic protection system is one of corrosion protection systems that well acknowledged protecting infrastructure such as pipeline and storage tank. Early damage of the infrastructure can be caused by improper design of the protection system. Currently, many cathodic protection systems are designed only based on the previous experiences. It is urgently needed the tool that can be used to simulate the effectiveness of any design of cathodic protection system before the system is applied to any structure. In this study, the three-dimensional boundary element method was developed to simulate the effectiveness of sacrificial anode cathodic protection system. The potential in the domain was modeled using Laplace equation. The equation was solved by applying boundary element method, hence the potential and current density on the metal surface and at any location in the domain can be obtained. The boundary conditions on the protected structures and sacrificial anode were represented by their polarization curves. A cathodic protection system for liquid storage tank and submersible pump were evaluated in this study. The effect of placement of sacrificial anode were examined to optimize the protection system. The result shows that the proposed method can be used as a tool to simulate the effectiveness of the sacrificial anode cathodic protection system.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    The Evaluation of Cathodic Protection System Design by Using Boundary Element Method


    Beteiligte:
    Ridha, M. (Autor:in) / Safuadi, M. (Autor:in) / Huzni, Syifaul (Autor:in) / Israr, Israr (Autor:in) / Ariffin, Ahmad Kamal (Autor:in) / Daud, Abdul Razak (Autor:in)


    Erscheinungsdatum :

    2011


    Format / Umfang :

    6 Seiten




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Advances in offshore cathodic protection modeling using the boundary element method

    Strommen, R. / Keim, W. / Finnegan, J. et al. | Tema Archiv | 1987


    Application of the boundary-element method to offshore cathodic protection modeling

    Cicognani, P. / Gasparoni, F. / Mazza, B. et al. | Tema Archiv | 1990


    Marine cathodic protection system

    LAMBOURNE ALEXIS / CALLOW LESLIE | Europäisches Patentamt | 2017

    Freier Zugriff

    MARINE CATHODIC PROTECTION SYSTEM

    LAMBOURNE ALEXIS / CALLOW LESLIE | Europäisches Patentamt | 2016

    Freier Zugriff

    CATHODIC PROTECTION SYSTEM

    MORTLOCK DAVID / CONSTANTINIS DANIEL | Europäisches Patentamt | 2022

    Freier Zugriff