The scarf-joint technique is one of the latest techniques used for repairing composite aircraft structures. But this technique is mostly used at depot level repairing activities since it requires autoclave and other equipments. This article focuses on scarf joint comprised of vacuum and autoclave precured and co-cured composite patches bonded to autoclave and vacuum precured parent laminates. Autoclave and vacuum cured parent laminates and scarfjoints were prepared and exposed to the same temperature and moisture environment for comparison. All specimens were loaded in tension at three temperatures. Interlaminar shear strength (ILSS) tests were also carried out for the parent materials. As noted, the tensile strength and ILSS decrease when the material has been exposed to moisture and tested at elevated temperature. But, no significant difference was reported for either tensile strength or ILSS between autoclave and vacuum cured materials. The room temperature repair efficiencies are reported for single scarf repairs comprised of vacuum co-cured and precured patches. These vacuum cured repair efficiencies were found to be similar to the efficiency of the autoclave precured patch repair. This result supports the feasibility of scarf joint repairs with precured or co-cured patches under vacuum curing conditions in field level facilities. Therefore, repairs with vacuum precured or vacuum co-cured patches requiring less equipment seems to be a serious potential alternative to the composite patch repair requiring autoclave conditions which might be only available at depot level maintenance centers.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Processing and environmental effects on composite repairs


    Beteiligte:
    Elaldi, Faruk (Autor:in) / Elaldi, Pelin (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2012


    Format / Umfang :

    5 Seiten, 6 Bilder, 3 Tabellen, 17 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Repairs of aircraft composite structures

    Rössler, Marc | TIBKAT | 2015


    Quick repairs of composite structures

    Roh, Hee Seok / Sun, C.T. / Pipes, R.B. | Tema Archiv | 2008



    Key Processing Issues for Bonded Repairs

    Rubin, Alex M. / Thomas, Holly J. | SAE Technical Papers | 2004


    Composite material repairs to metallic airframe components

    CHRISTIAN, T. F. / HAMMOND, D. O. / COCHRAN, J. B. | AIAA | 1992