The purpose of this paper is to find the variations of brake lining's frictional performance with braking conditions, and their influence on the braking safety and reliability of automobiles. As the semimetal brake lining is widely used currently in automobiles, it was selected as the experimental material. By simulating the braking conditions and environment of automobiles, some tribological experiments of the brake lining were investigated on the X-DM friction tester, when it is paired with the friction disc made of gray cast iron. The influence of braking pressure, sliding velocity and surface temperature on the friction coefficient and its stability coefficient were studied in depth through experiments. The friction coefficient decreases gradually with the increasing of braking pressure and sliding velocity when the surface temperature is naturally rising. It rises first then falls with the surface temperature rising and the maximal value appears at nearly 200 °C. The stability of friction coefficient decreases obviously when the sliding velocity exceeds 30 m/s, the braking pressure exceeds 1.8 MPa and the surface temperature is over 200 °C. Based on the experimental results, the authors consider that it is not reliable to execute an emergency braking only by rising the braking pressure when the automobile is driving with a high velocity. In order to reduce the bad influence of high temperature on frictional performance, some effective actions should be taken for cooling the friction disc. What is more, special attention should be paid to the decreasing of frictional stability during the braking with high velocity, pressure and temperature. This paper studies the influence of braking conditions on friction coefficient and its stability of the semimetal brake lining for automobiles. It is believed that this research may have some actual guidance for enhancing the braking safety and reliability of automobiles.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Frictional performance of semimetal brake lining for automobiles


    Beteiligte:
    Yin, Yan (Autor:in) / Bao, Jiusheng (Autor:in) / Yang, Lei (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2012


    Format / Umfang :

    6 Seiten, 6 Bilder, 17 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch





    Braking performance of a novel frictional-magnetic compound disc brake for automobiles

    Yin, Yan / Bao, Jiusheng / Liu, Jinge et al. | SAGE Publications | 2019


    Vacuum brake for automobiles

    Engineering Index Backfile | 1916


    BRAKE LINING DIAGNOSTIC SYSTEM AND BRAKE LINING DIAGNOSTIC DEVICE

    SANNOMIYA KOTARO / KODAIRA NORIMI / HOSHIZAKI TETSURO et al. | Europäisches Patentamt | 2019

    Freier Zugriff

    Electromagnetic brake system for automobiles

    Europäisches Patentamt | 2023

    Freier Zugriff