The extrusion die plays a crucial role in the quality control of aluminum alloy profile production. In practice, the extrusion die design mainly depends on the experience and intuition of the die designers. The designed and manufactured dies are usually tested and modified many times before putting into practical extrusion production, and difficult to be guaranteed as optimal ones. In this paper a method of die design based on numerical simulation was proposed in order to optimize the die structure and enhance the level of die design. Firstly, the extrusion process of a large wallboard of high-speed train was simulated by means of HyperXtrude software. It was found that a severe non-uniform velocity distribution emerged in the cross-section of the extrudate and twist deformation occurred, therefore the initial die was not an acceptable one. Then, three times of modifications to the die structure were made to optimize the die structure and improve the product quality. Finally, an optimal die structure with uniform material flow velocity in the cross-section of the die exit was obtained. A sound wallboard extrudate of high-speed train was produced The die design methods for complex extrusion profiles were summarized and proposed, including the design methods of porthole area of multi-cavity dies, the baffle plate, and the sunken port bridge structure.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Numerical simulation of extrusion process and die structure optimization for a complex aluminum multicavity wallboard of high-speed train


    Weitere Titelangaben:

    Numerische Simulation der Extrusion und Gesenkstrukturoptimierung für eine komplexe Aluminiummehrkammertrennwand für Hochgeschwindigkeitszüge


    Beteiligte:
    Chen, Hao (Autor:in) / Zhao, Guoqun (Autor:in) / Zhang, Cunsheng (Autor:in) / Guan, Yanjin (Autor:in) / Liu, Hui (Autor:in) / Kou, Funjun (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2011


    Format / Umfang :

    9 Seiten, 14 Bilder, 3 Tabellen, 22 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Microgap Multicavity Fabry-Perot Biosensor

    Zhang, Y. / Chen, X. / Wang, Y. et al. | British Library Online Contents | 2007


    Motor train unit carriage wallboard assembly

    LIU GANG / WEI XIAODONG / ZHUANG YAN et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    Noise-proof mounting structure for high-speed elevator wallboard

    LUO JUNHUA / YANG JIN / LIAO XINXIN | Europäisches Patentamt | 2021

    Freier Zugriff

    High-speed train aluminum alloy luggage rack structure

    TANG KAIJIAN / LI JIE / WANG CHAO | Europäisches Patentamt | 2021

    Freier Zugriff

    Numerical simulation of aerodynamic performance of high speed train

    Gu,C.Y. / Wilhelmsson,E. / ABB Corporate Res.,SE | Kraftfahrwesen | 1994