Various experiments, such as the thermal extract (TE) method, field and emission cell (FLEC) method and 20 L small chamber, were performed to examine the total volatile organic compound (TVOC) emissions from bio-composites. The TVOC of neat poly(lactic acid) (PLA) was ranged from 0.26 mg/m2 h to 4.11 mg/m2 h with increasing temperature. For both PLA bio-composites with pineapple flour and destarched cassava flour, the temperature increased from 0.30 mg/m2 h to 3.72 mg/m2 h and from 0.19 mg/m2 h to 8.74 mg/m2 h, respectively. The TVOC emission factors of all samples increased gradually with increasing temperature. Above 70 °C, both PLA-P and PLA-C composites had higher TVOC emission factors than neat PLA due to the rapid emission of natural volatile organic compounds (VOCs), such as furfural (2-furancarboxyaldehyde). PLA composites containing 30 wt% flour had high 1,4-dioxane reduction ability, >50%. The TVOC of poly(butylene succinate) (PBS) was emitted rapidly from 50 °C to 90 °C due to succinic acid from the pyrolysis of PBS. The TVOC emission factors of PLA bio-composite and PBS bio-composites were reduced using the bake-out method (temperature at 70 °C and baking time 5 h). The initial TVOC emission factors of the PLA and PBS bio-composites with pineapple flour and destarched cassava flour were reduced by the baking treatment using FLEC. The TVOC factors from PLA and PBS decreased until 5 days and were commonly maintained a relatively constant value after 5 days using 20 L small chamber. The decrease in TVOC emission showed a similar trend to that of the TE and FLEC method. This method confirmed the beneficial effect of the baking treatment effect for polypropylene and linear density polyethylene (LDPE).


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Reduction of VOC emission from natural flours filled biodegradable bio-composites for automobile interior


    Weitere Titelangaben:

    Verminderung der VOC-Emission von biologisch abbaubaren Bioverbundwerkstoffen, gefüllt mit Pflanzenmehlen, für die Kraftfahrzeug-Innenausstattung


    Beteiligte:
    Kim, Ki-Wook (Autor:in) / Lee, Byoung-Ho (Autor:in) / Kim, Sumin (Autor:in) / Kim, Hyun-Joong (Autor:in) / Yun, Ju-Ho (Autor:in) / Yoo, Seung-Eul (Autor:in) / Sohn, Jong-Ryeul (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2011


    Format / Umfang :

    7 Seiten, 9 Bilder, 6 Tabellen, 18 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Automobile interior noise reduction using finite element methods

    Nelske, D.J. / Howell, L.J. | Tema Archiv | 1978


    Affordable Composites for the Automobile Interior and Exterior

    Hettinga, S. / Associazione Tecnica dell'Automobile | British Library Conference Proceedings | 1987


    AUTOMOBILE INTERIOR TRIM

    SAKUMA TOMONARI | Europäisches Patentamt | 2020

    Freier Zugriff

    AUTOMOBILE INTERIOR TRIM

    NAKAGAWA HIROMICHI | Europäisches Patentamt | 2019

    Freier Zugriff

    AUTOMOBILE INTERIOR PLATE

    FUKUSHIMA SHINJI / ITO HIROTAKA / SHINKAI TATSUYA et al. | Europäisches Patentamt | 2017

    Freier Zugriff