In order to effectively transport the gas in arctic or seismic region, pipeline demands linepipe steels with high deformation capacity since earth movement occurs by frost heave or earth quake. New concept of SBD (strain based design) was proposed for safe pipeline construction. In view of obtaining the material properties of X80 and X100 for SBD application, many efforts to achieve superior strain capacity have been made. The X80/X100 linepipe steel plates and pipes for strain based design were developed. The chemical composition an TMCP (thermomechanical controlled process) parameters were designed to achieve high strength and improved toughness at body and heat affected zone, and high strain aging resistance after coating. Dual phase microstructure results in enhancing the strain aging resistance of X80/X100 linepipe steels. Several pipes of 1 meter length were made by UOE (fabrication technique: from U-shape to O-shape to circumferential Expansion) simulator and submerged arc welding was carried out for seam welding with optimum heat input, welding material and process. Mechanical properties were evaluated through plate, pipe and aged treatment specimen. In order to evaluate the compressive strain limit, buckling test was performed with long pipes of X100 before and after aging treatment. It could be realized that the developed pipes satisfy the minimum requirement of strain capacity for strain based design linepipe.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of X80/X100 linepipe steel plates and pipes for strain based design pipeline


    Beteiligte:
    Seo, Dong-Han (Autor:in) / Yoo, Jang-Yong (Autor:in) / Song, Woo-Hyun (Autor:in) / Cho, Woo-Yeon (Autor:in) / Kang, Ki-Bong (Autor:in)


    Erscheinungsdatum :

    2009


    Format / Umfang :

    6 Seiten, 15 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Datenträger


    Sprache :

    Englisch




    Strain capacity of X100 high-strain linepipe for strain-based design application

    Igi, Satoshi / Kondo, Joe / Suzuki, Nobuhisa et al. | Tema Archiv | 2008


    Mass production and installation of X100 linepipe for strain-based design application

    Ishikawa, Nobuyuki / Okatsu, Mitsuhiro / Endo, Shigeru et al. | Tema Archiv | 2008


    Field weldability on X100 steel pipes

    Barsanti, L. | Tema Archiv | 2002


    Possible use of new materials for high pressure linepipe construction: An opening on X100 grade steel

    Barsanti, L. / Hillenbrand, H.G. / Mannucci, G. et al. | Tema Archiv | 2002


    Girth welding of X100 pipeline steels

    Hudson, M.G. / Blackman, S.A. / Hammond, J. et al. | Tema Archiv | 2002