Application of strain based design to pipelines in arctic or seismic areas has recently been recognized as important. So far, there has been much study performed on tensile strain limit and compressive strain limit. However, the relationship between bending buckling (compressive strain limit) and tensile strain limit has not been discussed. A model using actual stress strain curves suggests that the tensile strain limit increases as Y/T (yield to tensile strength ratio) rises under uniaxial tensile stress because a pipe manufacturer usually raises TS (tensile strength) instead of lowering YS (yield strength) to achieve low Y/T. Under bending of a pipe with a high D/t, an increase in compressive strain on intrados of a bent pipe at the maximum bending moment (epsilon-cp(asterisk)) improves the tensile strain limit because the tensile strain limit is controlled by the onset of buckling or epsilon-cp(asterisk) which is increased by lowering Y/T. On the other hand, under bending of a pipe with a low D/t, the tensile strain limit may not be influenced by improvement of buckling behavior because tensile strain on the extrados is already larger than the tensile limit at epsilon-cp(asterisk). Finally, it is argued that the balance of major linepipe properties is important. Efforts other than the strict demands for pipe properties are also very important and inevitable to improve the strain capacity of a pipeline.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Required linepipe properties for high strain applications and possible resolution by pipe manufacturing technology


    Weitere Titelangaben:

    Notwendige Eigenschaften von Leitungsrohren für Anwendungen bei hoher Verformung und mögliche Lösungen durch die Rohrherstellungstechnologie


    Beteiligte:
    Asahi, Hitoshi (Autor:in) / Tsuru, Eiji (Autor:in)


    Erscheinungsdatum :

    2008


    Format / Umfang :

    6 Seiten, 13 Bilder, 11 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Pipe production technology and properties of X120 linepipe

    Asahi, H. / Tsuru, E. / Hara, T. et al. | Tema Archiv | 2004


    Strain capacity of X100 high-strain linepipe for strain-based design application

    Igi, Satoshi / Kondo, Joe / Suzuki, Nobuhisa et al. | Tema Archiv | 2008


    Compressive strain limits of large diameter X80 UOE linepipe

    Timms, Chris M.J. / DeGeer, Duane D. / Chebaro, Mohamed R. et al. | Tema Archiv | 2009


    Characterisation of ultra high strength linepipe

    Ohm, R.K. / Martin, J.T. / Orzessek, K.M. | Tema Archiv | 2000


    Allowable strains for high strength linepipe

    Hohl, G.A. / Vogt, G.H. | Tema Archiv | 1992