At the initial stage of ship design, a hull structural model, that is, a 3D CAD model of a hull structure is not generated by the existing shipbuilding CAD system because it is time-consuming and requires much effort. Without the hull structural model, a designer must manually calculate the production material information of a building block by using 2D drawings, parent ship data, and design experiences at the initial planning and scheduling stages. At the initial stage of hull structural analysis, the designer manually generates a structural analysis model, that is, a finite element model of the hull structure. Moreover, the piping model, that is a 3D CAD model of the pipes in the hull structure, is generated independently of the hull structural model at the detailed design stage. To lighten the burden imposed on the designer, we developed an initial hull structural modeling system in our previous study. Using this system, a designer can rapidly and easily generate the hull structural model at the initial stage of design. In this study, the generation methods of the production material information of a building block, the structural analysis model, and the piping model based on the hull structural model are developed. The applicability of the developed methods are demonstrated by applying them to a deadweight 300,000 ton very large crude oil carrier (VLCC). The results show that the developed methods can quickly generate the corresponding information or models at the initial design stage.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Improvement of ship design practice using a 3D CAD model of a hull structure


    Beteiligte:
    Roh, Myung-Il (Autor:in) / Lee, Kyu-Yeul (Autor:in) / Choi, Woo-Young (Autor:in) / Yoo, Seong-Jin (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2008


    Format / Umfang :

    20 Seiten, 26 Bilder, 1 Tabelle, 22 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    SHIP HULL STRUCTURE

    OKADA TAICHI / IWAI USHIO | Europäisches Patentamt | 2017

    Freier Zugriff

    SHIP HULL STRUCTURE

    SHINKAWA KEISUKE / YUASA SHINYA | Europäisches Patentamt | 2017

    Freier Zugriff

    HULL STRUCTURE OF MULTI-HULL SHIP

    MAENO HITOSHI / IMASAKA HISASHI / HATANAKA HIROYUKI | Europäisches Patentamt | 2023

    Freier Zugriff

    EXOSKELETON SHIP HULL STRUCTURE

    VAN DIEPEN PETER | Europäisches Patentamt | 2018

    Freier Zugriff

    HULL STRUCTURE AND SHIP

    AMANO MASAYOSHI / NAKAZAWA KAZUHIRO | Europäisches Patentamt | 2018

    Freier Zugriff