Resistance spot welding is one of the primary means of joining sheet metal in the automotive industry and other industries. The demand for improved corrosion resistance has led the automotive industry to increasingly use zinc coated steel in auto body construction. One of the major concerns associated with welding coated steel is the mushrooming effect (the increase in the electrode diameter due to deposition of copper into the spot surface) resulting in reduced current density and undersized welds (cold welds). The most common approach to this problem is based on the use of simple unconditional incremental algorithms (steppers) for preprogrammed current scheduling. In this paper, an intelligent algorithm is proposed for adjusting the amount of current to compensate for the electrodes degradation. The algorithm works as a fuzzy logic controller using a set of engineering rules with fuzzy predicates that dynamically adapt the secondary current to the state of the weld process. The state is identified by indirectly estimating two of the main process characteristics - weld quality and expulsion rate. A soft sensor for indirect estimation of the weld quality employing a learning vector quantization (LVQ) type classifier is designed to provide a real time approximate assessment of the weld nugget diameter. Another soft sensing algorithm is applied to predict the impact of changes in current on the expulsion rate of the weld process. By maintaining the expulsion rate just below a minimal acceptable level, robust process control performance and satisfactory weld quality are achieved. The intelligent constant current control for resistance spot welding is implemented and validated on a medium frequency direct current (MFDC) constant current weld controller. Results demonstrate a substantial improvement of weld quality and reduction of process variability due to the proposed new control algorithm.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Intelligent constant current control for resistance spot welding


    Beteiligte:
    El-Banna, M. (Autor:in) / Filev, D. (Autor:in) / Chinnam, R.B. (Autor:in)


    Erscheinungsdatum :

    2007


    Format / Umfang :

    8 Seiten, 11 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    EFFECT OF FIT-UP CONDITIONS WHEN USING CONSTANT CURRENT CONTROL SYSTEMS FOR RESISTANCE SPOT WELDING

    Gould, Jerry E. / Kimchi, Menachem / Mitchell, Tom | SAE Technical Papers | 1993


    Effect of fit-up conditions when using constant current control systems for resistance spot welding

    Gould,J.E. / Kimchi,M. / MNitchell,T. et al. | Kraftfahrwesen | 1993


    Multi Step Current Controlling Method in Resistance Spot Welding

    Mukumoto, K. / Shinmyo, T. / Kikuchi, R. et al. | British Library Conference Proceedings | 2007


    Analysis of resistance spot welding

    Dong,P. / Kimchi,M. / Battelle Memorial Inst.,US et al. | Kraftfahrwesen | 1997


    Welding, Resistance: Spot and Seam

    SAE Technical Papers | 2005